NuWaves RF Solutions
Middletown, OH 45044
NuPower™ Xtender™ Bidirectional Amplifier features automatic transmit sensing.
Available in 12C04A model NW-BA-12C04A with part number, NuPower™ Xtender™ Bidirectional Amplifier operates with +5dBm input level with 3.5 dB noise figure. Featuring fast T/R mode switch time of < 1.5 μs, unit offers 15 watts of RF power across 1.0 to 2.5 GHz L- & S- band frequencies. Using Gallium Nitride power amplifier device technology, product features 6.9 cu in. small form factor and...Read More »
NuPowerTM 06C09A C-band PA uses GaN-on-SiC MMIC technology.
Measuring 2.5 x 2.0 x 0.65 inch compact size, NuPowerTM 06C09A C-band Power Amplifier provides 40 dB RF gain and module efficiency of greater than 35%. Suitable for electronic warfare systems for airborne electronic attack and unmanned aircraft systems, unit offers 15 Watts saturated RF power in C-band of 4.5 GHz to 6.25 GHz frequency coverage and is ideal for integration into wide variety of air...Read More »
C-Band 20 W RF Power Amplifier supports complex waveforms.
NuPower™ 06D05A provides saturated RF power of 20 W in C-band (4.4–4.9 GHz) with module efficiencies of up to 30%. For complex waveforms requiring linear PA, this product offers error vector magnitude (EVM) of 4% at 2 W output.- RF gain of 40 dB is achieved with- 0 dBm nominal input drive level, and 4.50 x 3.50 x 0.61 in. aluminum chassis promotes heat dissipation for higher-temperature...Read More »
RF Power Amplifier supports L- and S-band transmitters.
Housed in 1.8 x 1.8 x 0.5 in. rugged aluminum chassis, NuPower™ 12A03A delivers minimum of 5 W of RF power from 1.0–2.5 GHz when driven with 0 dBm (1 mW) RF input signal. Device is also available in 30 dBm (1 W) input power level version, allowing plug-and-play use with various data transceivers. With low current draw of 0.85 A at +28 Vdc, amplifier supports array of RF communications,...Read More »
U.S. Army Awards Nuwaves Engineering 2016 SBIR Phase I Contract for Development of Tactical Aircraft Transponder Simulation System
NuWaves Partners with ViaSat to Accurately Simulate the RF Signal Environment MIDDLETOWN, Ohio – NuWaves Engineering, a veteran-owned small business providing advanced radio frequency (RF) and microwave solutions, today announced a Small Business Innovation Research (SBIR) Phase I contract with the U.S. Army’s Redstone Test Center (RTC) to research and develop a Mode 5 Identification Friend...Read More »
RF Upconverter supports 2 MHz to 3 GHz systems.
Accepting user-programmable IF input signal from 2–70 MHz, Model RF2-3000UCV1 delivers RF output at any user-programmable frequency between 2 MHz and 3 GHz, with tuning resolution of 5 kHz. Multi-octave device has 50 dB of attenuation control with incremental steps of 0.5 dB. Housed in 1.0 x 2.5 x 3.5 in. ruggedized aluminum enclosure, upconverter operates at 6 Vdc and features SMA RF...Read More »
RF Power Amplifier features multi-octave operation.
Designed for VHF to S-band transmitters and data radios, NuPower™ 11B02A typically delivers 10 W of RF power from 225–2550 MHz when driven with 3 dBm RF input signal. Amplifier provides standby to transmit switching speed of less than 30 -µs, conserving energy between transmit cycles in power-limited applications. Housed in 2.34 x 1.96 x 0.620 in. aluminum chassis, unit features broad supply...Read More »
Nuwaves Engineering Announces the Development of a Low-Cost 4 Watt Linear VHF/UHF Radio Frequency Bidirectional Amplifier Module For Communications, Telemetry and Electronic Warfare Markets
Middletown, Ohio – NuWaves Engineering, an international Radio Frequency (RF) and Microwave solutions provider, announced the Internal Research and Design (IRaD) effort for a miniaturized VHF/UHF RF bidirectional amplifier (BDA). The NuPower™ Xtender™ model 16A06A will feature high linearity performance and small size, at an affordable price point. The NuPower™ Xtender™ 16A06A model,...Read More »
RF Power Amplifier supports electronic warfare applications.
When driven with 0 dBm RF input signal, NuPower™ Model 12A03A delivers minimum of 5 W RF power from 1.0–2.5 GHz. Unit is also available in 30 dBm (1 Watt) input power level version, allowing plug-and-play use with various data transceivers, such as L-3 Communications Bandit radio. Housed in 1.8 x 1.8 x 0.5 in. rugged aluminum chassis, amplifier features low current draw of 0.85 A at +28 Vdc,...Read More »
RF Power Amplifier covers 1,700-2,400 MHz frequency range.
With module efficiencies of 35–55%, NuPower™ 12D05A provides saturated RF power of 35 Watts in L-band and 20 Watts in S-band. Amplifier offers 44 dB of RF gain with nominal input drive level of 0 dBm. Aluminum chassis, measuring 4.50 x 3.50 x 0.61 in., provides heat dissipation and is small enough for integration into air- or ground-based tactical, test, or training platforms. Device can be...Read More »