Vigitron Inc

Electrical Equipment & Systems

Layer 2 Managed Network Switch supports IP cameras.

Designed to facilitate operation of IP video network, 26-port MaxiiNet™ Vi3326 features two 1 Gbps independent uplink and downlink ports that allow for full use of all 24 ports. Unit provides 52 GB switching fabric and supports Jumbo Frames up to 9,600 bytes at 100 Mbps. Other features include SNMP for communicating error messaging to local computers, automatic IP connection and reconnection,...

Read More »
Ethernet Repeater handles PoE power up to 60 W.
Communication Systems & Equipment

Ethernet Repeater handles PoE power up to 60 W.

Designed for applications requiring transmission of both video and PoE with distances up to 656 ft, Vi3002 Ethernet and PoE ++ Repeater fits in tight spaces such as conduits, standard, and weatherproof enclosures. Patent pending Pass-Through-PoE technology enables repeater to be used with most PTZ IP cameras by major manufacturers requiring more than standard 802.3at (30 W) power inputs.

Read More »
PoE Switch supports IP cameras.
Electrical Equipment & Systems

PoE Switch supports IP cameras.

Providing PoE power budget of 180 W, Model Vi3010 is equipped with ten 1 Gbps Ethernet ports, each capable of providing 15.4 W (802.3af). In addition,Â- 6 ports can deliver up to 30 W (802.3at) PoE power. Supporting Jumbo Frames up to 9,600 bytes, unit provides high bandwidth switch fabric of 20 Gb. Other features include automatic MAC identification, individual IP source guard, Virtual...

Read More »
Dual-Port PoE Midspan meets requirements of high-power IP cameras.
Electrical Equipment & Systems

Dual-Port PoE Midspan meets requirements of high-power IP cameras.

Compatible with PTZ dome cameras from Axis, Sony, and Hikvision that require PoE power greater than 30 W, Vi2202 has built-in power supply that enables each port to provide up to aggregated 60 W. Unit can be combined with Vi1120 external power supply to provide up to 60 W PoE on each port for higher power applications. While compliant to IEE 802.3af/at, midspan also supports nonstandard PoE loads...

Read More »
Diagnostic Tool facilitates installation of PoE cameras.
Communication Systems & Equipment

Diagnostic Tool facilitates installation of PoE cameras.

Designed to pinpoint problems or prevent problems before they occur, ViewMate(TM) Vi0020 PoE Camera Setup Tool works with both CCTV and IT systems compliant with 802.3 af/at PoE standards. Unit features 2-digit PoE voltmeter, providing accurate measurement of actual voltage delivered to camera. When connected, ViewMate(TM) passes power from PoE Midspan at control room to remote IP camera and...

Read More »
Ethernet Hubs provide transition from analog to digital CCTV.
Communication Systems & Equipment

Ethernet Hubs provide transition from analog to digital CCTV.

Completely transparent to IT networks, MaxiiCopper 8-port Model Vi2408 and 16-port Model Vi2416 provide transition from analog to digital CCTV systems using existing coax infrastructure. When deployed along with MaxiiCopper Vi2401 Ethernet Extender at remote end, centrally located extender hubs establish full-duplex, full-rate Ethernet connection up to 5,500 ft at 10Base-T or 2,100 ft at...

Read More »
IP Extenders support UTP and coax infrastructures.

IP Extenders support UTP and coax infrastructures.

Completely transparent to corporate networks, MaxiiCopper IP Extenders establish full-duplex, full-rate Ethernet connection up to 5,500 ft at 10Base-T or 2,100 ft at 100Base-T. Model Vi2301 is designed for UTP applications, while Model Vi2401 extends digital signals over coaxial cables. Operating without any IP programming, extenders meet high network bandwidth requirements of mega-pixel cameras...

Read More »
Active Receiver Hubs feature automatic video compensation.
Communication Systems & Equipment

Active Receiver Hubs feature automatic video compensation.

Compatible with worldwide video standards, Models Vi6200 and Vi6300 can transmit and receive video on unshielded twisted pair cable at 4,000 ft and 6,500 ft transmission distances. Automatic Video Compensation circuitry enables installers of CCTV to transmit video pictures over UTP cable at distances up to 6,500 ft without adjustment. Built to fit in standard 19 in. rack, units offer immunity to...

Read More »
Communication Systems & Equipment

Transmission Devices support up to 16 CCTV cameras.

Featuring built-in ac power supply, Vi1508VPD 8-channel and Vi1516VPD 16-channel Video-Power-Data combiners receive video from each camera and provide power and PTZ data over single Cat5 cable. Each channel provides isolated 24 or 28 V at 1 A for up to total of 16 A. Units are 1U rack-mounted and follow EIA/TIA 568B structured building wiring standard, suited for structured wiring CCTV.

Read More »
VIGITRON Introduces a Video Isolation Transformer
Electrical Equipment & Systems

VIGITRON Introduces a Video Isolation Transformer

August 1, 2007, San Diego, California Vigitron, Inc. introduces the Vi1060, a high quality video isolation transformer for CCTV and A/V applications. The Vi1060 is designed to completely eliminate the longitudinal hum which caused by earth loop currents. It operates at a virtually flat response from 10 Hz to 7 MHz, the widest bandwidth in its class while introducing a low insertion loss. This...

Read More »
Company News

Vigitron Establishes YouTube Channel to Promote Network Education

San Diego, California (August 2020). Vigitron Inc, the leading manufacturer of network solutions for security applications establishes a YouTube channel for the further education of networking for security applications. “Since the inception of our IP/PoE products division ten years ago, Vigitron has been devoted to providing education on the unique aspects of network design for security...

Read More »
Electrical Equipment & Systems

Layer 2 Managed Network Switch supports IP cameras.

Designed to facilitate operation of IP video network, 26-port MaxiiNet™ Vi3326 features two 1 Gbps independent uplink and downlink ports that allow for full use of all 24 ports. Unit provides 52 GB switching fabric and supports Jumbo Frames up to 9,600 bytes at 100 Mbps. Other features include SNMP for communicating error messaging to local computers, automatic IP connection and reconnection,...

Read More »
Ethernet Repeater handles PoE power up to 60 W.
Communication Systems & Equipment

Ethernet Repeater handles PoE power up to 60 W.

Designed for applications requiring transmission of both video and PoE with distances up to 656 ft, Vi3002 Ethernet and PoE ++ Repeater fits in tight spaces such as conduits, standard, and weatherproof enclosures. Patent pending Pass-Through-PoE technology enables repeater to be used with most PTZ IP cameras by major manufacturers requiring more than standard 802.3at (30 W) power inputs.

Read More »
PoE Switch supports IP cameras.
Electrical Equipment & Systems

PoE Switch supports IP cameras.

Providing PoE power budget of 180 W, Model Vi3010 is equipped with ten 1 Gbps Ethernet ports, each capable of providing 15.4 W (802.3af). In addition,Â- 6 ports can deliver up to 30 W (802.3at) PoE power. Supporting Jumbo Frames up to 9,600 bytes, unit provides high bandwidth switch fabric of 20 Gb. Other features include automatic MAC identification, individual IP source guard, Virtual...

Read More »
Dual-Port PoE Midspan meets requirements of high-power IP cameras.
Electrical Equipment & Systems

Dual-Port PoE Midspan meets requirements of high-power IP cameras.

Compatible with PTZ dome cameras from Axis, Sony, and Hikvision that require PoE power greater than 30 W, Vi2202 has built-in power supply that enables each port to provide up to aggregated 60 W. Unit can be combined with Vi1120 external power supply to provide up to 60 W PoE on each port for higher power applications. While compliant to IEE 802.3af/at, midspan also supports nonstandard PoE loads...

Read More »
Diagnostic Tool facilitates installation of PoE cameras.
Communication Systems & Equipment

Diagnostic Tool facilitates installation of PoE cameras.

Designed to pinpoint problems or prevent problems before they occur, ViewMate(TM) Vi0020 PoE Camera Setup Tool works with both CCTV and IT systems compliant with 802.3 af/at PoE standards. Unit features 2-digit PoE voltmeter, providing accurate measurement of actual voltage delivered to camera. When connected, ViewMate(TM) passes power from PoE Midspan at control room to remote IP camera and...

Read More »
Ethernet Hubs provide transition from analog to digital CCTV.
Communication Systems & Equipment

Ethernet Hubs provide transition from analog to digital CCTV.

Completely transparent to IT networks, MaxiiCopper 8-port Model Vi2408 and 16-port Model Vi2416 provide transition from analog to digital CCTV systems using existing coax infrastructure. When deployed along with MaxiiCopper Vi2401 Ethernet Extender at remote end, centrally located extender hubs establish full-duplex, full-rate Ethernet connection up to 5,500 ft at 10Base-T or 2,100 ft at...

Read More »
IP Extenders support UTP and coax infrastructures.

IP Extenders support UTP and coax infrastructures.

Completely transparent to corporate networks, MaxiiCopper IP Extenders establish full-duplex, full-rate Ethernet connection up to 5,500 ft at 10Base-T or 2,100 ft at 100Base-T. Model Vi2301 is designed for UTP applications, while Model Vi2401 extends digital signals over coaxial cables. Operating without any IP programming, extenders meet high network bandwidth requirements of mega-pixel cameras...

Read More »
Active Receiver Hubs feature automatic video compensation.
Communication Systems & Equipment

Active Receiver Hubs feature automatic video compensation.

Compatible with worldwide video standards, Models Vi6200 and Vi6300 can transmit and receive video on unshielded twisted pair cable at 4,000 ft and 6,500 ft transmission distances. Automatic Video Compensation circuitry enables installers of CCTV to transmit video pictures over UTP cable at distances up to 6,500 ft without adjustment. Built to fit in standard 19 in. rack, units offer immunity to...

Read More »
Communication Systems & Equipment

Transmission Devices support up to 16 CCTV cameras.

Featuring built-in ac power supply, Vi1508VPD 8-channel and Vi1516VPD 16-channel Video-Power-Data combiners receive video from each camera and provide power and PTZ data over single Cat5 cable. Each channel provides isolated 24 or 28 V at 1 A for up to total of 16 A. Units are 1U rack-mounted and follow EIA/TIA 568B structured building wiring standard, suited for structured wiring CCTV.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers