Imperx Inc.
Boca Raton, FL 33487-2812
CMOS Cameras feature minimized fixed pattern noise.
Equipped with OnSemi's Python series sensors ranging up to 25 MP, Cheetah Series provides many programmable features and pre-processing to assist in any imaging application. In certain models, wide dynamic range can be activated to provide >100 db. Without vertical smear or blooming characteristics, Cheetah cameras are optimized for outdoor or uncontrolled lighting environments.
Read More »
CCD-Based Day/Night Camera delivers high-definition images.
Combining ON Semiconductor Interline TransferÃ- CCD pixel design with electron multiplication (EM) output structure, PUMA enables delivery ofÃ- sub-electron noise performance with CCD-class image quality and uniformity forÃ- optimized low-light imaging. This 2 MP HD (1080p) Day/Night camera, based on On-Semiconductor KAE-02150 Extreme CCD, captures video in lighting conditions from...
Read More »
Video Capture Card integrates gamma correction capability.
HD-SDI Express frame grabber can acquire images from any SD/HD SDI video source and send them to ExpressCard/54-compliant notebook computer at rates exceeding 235 Mb/sec for real-time viewing and storage. It can be configured to compensate for display non-linearity through gamma correction or implement arbitrary transformations for knee correction, contrast enhancement, etc. Software gives full...
Read More »
Frame Grabber works with ExpressCard/54-compliant notebooks.
HD-SDI Express video capture card can acquire single or multiple images from any SD or HD SDI video source and send them to ExpressCard/54-compliant notebook computer at greater than 235 MBps. Along with support for plug-and-play operation with live insertion and removal, features include lookup tables, histograms, and hex pixel dumps. Card offers 75 W BNC coaxial connector that can accept analog...
Read More »
Imperx Adds GenCam and GigE Vision Compliance to Lynx Camera Family
May 10, 2007, Boca Raton, FL. Imperx, Inc. a leading provider of state-of-the-art digital cameras and frame grabbers, today announced that its Lynx family of Gigabit Ethernet cameras are now fully compliant with the GenCam and GigE Vision interface standards. The GigE Vision compatibility allows the cameras to connect seamlessly with a wide variety of image processing hardware and software over...
Read More »
Cameras feature thermoelectrically cooled image sensor.
TEC series cameras use thermoelectric cooling elements attached to sensor and are housed in 100 mm/side enclosure with integral heat sink to dissipate thermal energy. Operating at 0-50Ã-
Read More »
Digital Cameras deliver up to 4,872 x 3,248-pixel resolution.
Utilizing 16 megapixel Kodak KAI-16000 interline-transfer CCD sensor, LYNX Models IPX-16M3-G and IPX-16M3-L offer fully programmable resolution, frame rate, and exposure control. High-speed data clocks allow full-resolution images to transfer at rates up to 3 fps using dual output. Model 16M3-L features RS-232 port for control and base CameraLinkÃ-® interface for image data, while 16M3-G...
Read More »Frame Grabber provides Camera Link-® solution for laptops.
Suited for mobile image acquisition, Framelink(TM) employs Camera LinkÃ-® interface and features plug-n-play operation with hot insertion/removal. Product utilizes PCMCIA Cardbus interface and includes intelligent scatter/gather DMA engine with on-board memory. Provided with software suite that includes drivers and applications, small form factor PCMCIA Type II card is suited for industrial,...
Read More »Machine Vision Camera offers thermoelectric cooling option.
Equipped with 1 mil gate FPGA with 32-bit RISC processor, Lynx IPX-11M5-LT can dynamically zoom from 200 lines resolution at 30 fps to 2,672 lines at 5 fps, making it suited for bandwidth-constrained monitoring applications, such as remote surveillance. Peltier-effect thermoelectric cooling actively controls temperature of camera's large CCD at 20Ã-
Read More »
Smart Camera features 10.7 megapixel resolution.
Suited for bandwidth-constrained monitoring applications, Lynx IPX-11M5-L incorporates Lynx 32-bit RISC processor and draws 6 W from 10-15 Vdc supply. On-board intelligence enables camera to zoom from 200 lines @ 30 fps to 2,672 lines @ 5 fps. Operating over -5 to +50Ã-ºC temperature range, unit features horizontal windowing, automated iris, 10 sec integration time, and upgradeable camera...
Read More »
CMOS Cameras feature minimized fixed pattern noise.
Equipped with OnSemi's Python series sensors ranging up to 25 MP, Cheetah Series provides many programmable features and pre-processing to assist in any imaging application. In certain models, wide dynamic range can be activated to provide >100 db. Without vertical smear or blooming characteristics, Cheetah cameras are optimized for outdoor or uncontrolled lighting environments.
Read More »
CCD-Based Day/Night Camera delivers high-definition images.
Combining ON Semiconductor Interline TransferÃ- CCD pixel design with electron multiplication (EM) output structure, PUMA enables delivery ofÃ- sub-electron noise performance with CCD-class image quality and uniformity forÃ- optimized low-light imaging. This 2 MP HD (1080p) Day/Night camera, based on On-Semiconductor KAE-02150 Extreme CCD, captures video in lighting conditions from...
Read More »IMPERX Welcomes Barry Wolt to the Engineering Team
BOCA RATON, FLÃ- — IMPERX, Inc., a designer and manufacturer of industrial cameras and frame grabbers, enthusiastically welcomes Barry Wolt as a Senior Camera Design Engineer. Mr. Wolt has joined our engineering team bringing extensive hardware design experience in the aerospace as well as commercial sectors. His past work includes development of several airborne video processing systems....
Read More »IMPERX Welcomes Keith Wetzel as Director of New Product Development
Boca Raton, FL – IMPERX, Inc., a designer and manufacturer of industrial cameras and frame grabbers, has named industry veteran Keith Wetzel as Director of New Product Development. Wetzel will focus on strategic marketing initiatives and new product development aimed at driving continued customer satisfaction with winning imaging solutions. Keith brings over 28 years of results-oriented...
Read More »Hans Moller Joins IMPERX as Senior Hardware Engineer
BOCA RATON, FLÃ- – IMPERX, Inc. welcomes seasoned design engineer and system architect Hans Moller to the IMPERX Engineering Team as Senior Hardware Engineer. Mr. Moller brings with him a wealth of experience and knowledge in hardware architecture and design. With Mr. Moller's extensive background and FPGA development skills, he is quickly becoming a valuable asset to our team, said Petko...
Read More »
Video Capture Card integrates gamma correction capability.
HD-SDI Express frame grabber can acquire images from any SD/HD SDI video source and send them to ExpressCard/54-compliant notebook computer at rates exceeding 235 Mb/sec for real-time viewing and storage. It can be configured to compensate for display non-linearity through gamma correction or implement arbitrary transformations for knee correction, contrast enhancement, etc. Software gives full...
Read More »
Frame Grabber works with ExpressCard/54-compliant notebooks.
HD-SDI Express video capture card can acquire single or multiple images from any SD or HD SDI video source and send them to ExpressCard/54-compliant notebook computer at greater than 235 MBps. Along with support for plug-and-play operation with live insertion and removal, features include lookup tables, histograms, and hex pixel dumps. Card offers 75 W BNC coaxial connector that can accept analog...
Read More »Imperx Joins Cognex Acquisition Alliance
September 16, 2008 BOCA RATON, FL, September 16, 2008. Imperx, Inc. a leading provider of state-of-the-art digital cameras for machine vision systems, announces its selection by machine vision system pioneer CognexÃ-® to become a member of the Cognex Acquisition Alliance. The Acquisition Alliance is a Cognex initiative to work with key camera vendors to provide integrated machine vision...
Read More »Imperx Establishes Ties to the Mid-West
BOCA RATON, FL , September 5, 2007. Imperx, Inc. a leading provider of state-of-the-art digital cameras and frame grabbers for machine vision systems, has expanded its market presence in the manufacturing belt of the US with a new business alliance. The company is partnering with North Coast Technical, Inc. of Chesterland, Ohio to deliver solutions to complex vision system challenges faced by...
Read More »
Imperx Adds GenCam and GigE Vision Compliance to Lynx Camera Family
May 10, 2007, Boca Raton, FL. Imperx, Inc. a leading provider of state-of-the-art digital cameras and frame grabbers, today announced that its Lynx family of Gigabit Ethernet cameras are now fully compliant with the GenCam and GigE Vision interface standards. The GigE Vision compatibility allows the cameras to connect seamlessly with a wide variety of image processing hardware and software over...
Read More »