Roboteq, Inc
Scottsdale, AZ 85260
Share:
I/O Expansion Card broadens applications for Raspberry PI.
Stacked on top of 700 MHz Raspberry PI SBC, RIO (Raspberry I/O) creates 65 x 85 x 20 mm embedded control and navigation computer. It adds 13 inputs that can be configured as digital inputs, 0–5 V analog inputs with 12-bit resolution, or pulse inputs capable of pulse width, duty cycle, or frequency capture. Also, 8 digital outputs are provided for driving loads up to 1 A each at up to 24 V....
Read More »Magnetic Sensor guides robotic vehicles along invisible tracks.
With resolution of 1 mm, MGS1600C detects and reports position of magnetic field along its horizontal axis. This 165 mm-wide sensor measures its lateral distance from center of track from height of up to 60 mm, accommodating line-following robotic applications that rely upon adhesive magnetic tape on floor. Enclosed in IP64-rated plastic enclosure, product comes with 2 m, 16-wire, round cable...
Read More »
Roboteq Backs Raspberry PI-Based Robot Navigation Computer Project on Kickstarter
Scottsdale, AZ – Roboteq, Inc (www.roboteq.com) is collaborating on a kickstarter project named RIO (for Raspberry IO) and aimed at creating an intelligent I/O card that stacks over the $35 Raspberry PI Linux Single Board computer. The RIO card includes a rich set of I/O and connectivity features. The card can also be fitted with an optional ARHS module, including 3 axis accelerometer, 3 axis...
Read More »
Brushless DC Motor Controller targets robotics, automation.
Able to accept commands from analog pedal/joystick, standard R/C radio, USB, CAN, or RS232 interface, SBL1360Â- can directly drive hall-sensor equipped brushless DC motor up to 30 A at up to 60 V. Basic Language Interpreter can execute 50,000+ Basic instructions per second, and motor's hall sensors are used to measure speed and travelled distance. Featuring up to 4 analog, 6 digital,...
Read More »
Magnetic Sensor guides robotic vehicles along tape-based tracks.
With customizable functionality offered via Basic-like scripting language, 160 mm wide MGS1600 detects and reports position of magnetic field along its horizontal axis as based on adhesive magnetic tape used to form track guide on floor. Advanced signal processing is used to measure lateral distance from center of track from heights up to 60 mm, and position resolution is 1 mm. Supplied...
Read More »
Smart Brushless DC Motor Controller suits automation and robotics.
Capable ofÂ- driving brushless DC motor up to 120 A at up to 50 V, MBL1650 accepts commands from analog pedal/joystick, R/C radio, USB, CAN, or RS232 interface. It uses motor hall sensors to measure speed and travel distance, and operates motor in open- or closed-loop speed or position mode with 1 kHz update rate. Measuring 4.45 x 5.5 x 0.78 in., unit includes 4 analog, 6 digital, and 5...
Read More »
Brushless DC Motor Controller targets EVs and robotics.
Featuring intelligent current sensing that automatically limits each power output to 75 A in all load conditions, HBL2350 can simultaneously drive 2 brushless DC motors at up to 50 V. Unit comes in 9.0 x 5.5 x 1.6 in. extruded aluminum case and accepts commands from analog pedal/joystick, standard R/C radio, USB, or RS232 interface. Dual channels can be operated independently or combined, and...
Read More »Brushless DC Motor Controller targets small electric vehicles.
Built into 9.0 x 5.5 x 1.6 in. extruded aluminum case, which also serves as heat sink, dual-channel Model HBL2350 can simultaneously drive 2 brushless DC motors up to 75 A each at up to 50 V. Controller includes up to 11 analog, 19 digital, and 6 pulse inputs, and accepts commands from analog pedal/joystick, standard R/C radio, USB, or RS232 interface. Basic Language Interpreter, capable of...
Read More »
Intelligent DC Motor Controller directly drives two motors.
Model SDC2130 drives 2 DC motors at 20 A each, or one motor up to 40 A. Able to switch automatically from one mode to another, it accepts commands from analog joystick, R/C radio, USB, or RS232 interface, and Basic Language Interpreter can execute over 50,000 instructions/sec. Current sensing and overheat, stall, and short circuit protection are also included. Featuring 70 x 60 mm, board-level...
Read More »
Motor Controller targets mobile robots and AGVs.
Capable of directly driving 2 DC motors up to 60 A each, at up to 50 V, Model MDC2250 accepts commands and can switch automatically from analog joystick, R/C radio, USB, or RS232 interface. Unit incorporates Basic Language Interpreter capable of executing over 50,000 Basic instructions/sec. Featuring 4.2 x 5.25 in. open frame design, controller supports up to 4 analog, 6 digital, and 4 pulse...
Read More »
I/O Expansion Card broadens applications for Raspberry PI.
Stacked on top of 700 MHz Raspberry PI SBC, RIO (Raspberry I/O) creates 65 x 85 x 20 mm embedded control and navigation computer. It adds 13 inputs that can be configured as digital inputs, 0–5 V analog inputs with 12-bit resolution, or pulse inputs capable of pulse width, duty cycle, or frequency capture. Also, 8 digital outputs are provided for driving loads up to 1 A each at up to 24 V....
Read More »Magnetic Sensor guides robotic vehicles along invisible tracks.
With resolution of 1 mm, MGS1600C detects and reports position of magnetic field along its horizontal axis. This 165 mm-wide sensor measures its lateral distance from center of track from height of up to 60 mm, accommodating line-following robotic applications that rely upon adhesive magnetic tape on floor. Enclosed in IP64-rated plastic enclosure, product comes with 2 m, 16-wire, round cable...
Read More »
Roboteq Backs Raspberry PI-Based Robot Navigation Computer Project on Kickstarter
Scottsdale, AZ – Roboteq, Inc (www.roboteq.com) is collaborating on a kickstarter project named RIO (for Raspberry IO) and aimed at creating an intelligent I/O card that stacks over the $35 Raspberry PI Linux Single Board computer. The RIO card includes a rich set of I/O and connectivity features. The card can also be fitted with an optional ARHS module, including 3 axis accelerometer, 3 axis...
Read More »
Brushless DC Motor Controller targets robotics, automation.
Able to accept commands from analog pedal/joystick, standard R/C radio, USB, CAN, or RS232 interface, SBL1360Â- can directly drive hall-sensor equipped brushless DC motor up to 30 A at up to 60 V. Basic Language Interpreter can execute 50,000+ Basic instructions per second, and motor's hall sensors are used to measure speed and travelled distance. Featuring up to 4 analog, 6 digital,...
Read More »
Magnetic Sensor guides robotic vehicles along tape-based tracks.
With customizable functionality offered via Basic-like scripting language, 160 mm wide MGS1600 detects and reports position of magnetic field along its horizontal axis as based on adhesive magnetic tape used to form track guide on floor. Advanced signal processing is used to measure lateral distance from center of track from heights up to 60 mm, and position resolution is 1 mm. Supplied...
Read More »
Smart Brushless DC Motor Controller suits automation and robotics.
Capable ofÂ- driving brushless DC motor up to 120 A at up to 50 V, MBL1650 accepts commands from analog pedal/joystick, R/C radio, USB, CAN, or RS232 interface. It uses motor hall sensors to measure speed and travel distance, and operates motor in open- or closed-loop speed or position mode with 1 kHz update rate. Measuring 4.45 x 5.5 x 0.78 in., unit includes 4 analog, 6 digital, and 5...
Read More »
Brushless DC Motor Controller targets EVs and robotics.
Featuring intelligent current sensing that automatically limits each power output to 75 A in all load conditions, HBL2350 can simultaneously drive 2 brushless DC motors at up to 50 V. Unit comes in 9.0 x 5.5 x 1.6 in. extruded aluminum case and accepts commands from analog pedal/joystick, standard R/C radio, USB, or RS232 interface. Dual channels can be operated independently or combined, and...
Read More »Brushless DC Motor Controller targets small electric vehicles.
Built into 9.0 x 5.5 x 1.6 in. extruded aluminum case, which also serves as heat sink, dual-channel Model HBL2350 can simultaneously drive 2 brushless DC motors up to 75 A each at up to 50 V. Controller includes up to 11 analog, 19 digital, and 6 pulse inputs, and accepts commands from analog pedal/joystick, standard R/C radio, USB, or RS232 interface. Basic Language Interpreter, capable of...
Read More »
Intelligent DC Motor Controller directly drives two motors.
Model SDC2130 drives 2 DC motors at 20 A each, or one motor up to 40 A. Able to switch automatically from one mode to another, it accepts commands from analog joystick, R/C radio, USB, or RS232 interface, and Basic Language Interpreter can execute over 50,000 instructions/sec. Current sensing and overheat, stall, and short circuit protection are also included. Featuring 70 x 60 mm, board-level...
Read More »
Motor Controller targets mobile robots and AGVs.
Capable of directly driving 2 DC motors up to 60 A each, at up to 50 V, Model MDC2250 accepts commands and can switch automatically from analog joystick, R/C radio, USB, or RS232 interface. Unit incorporates Basic Language Interpreter capable of executing over 50,000 Basic instructions/sec. Featuring 4.2 x 5.25 in. open frame design, controller supports up to 4 analog, 6 digital, and 4 pulse...
Read More »
