SNK America Inc.

SNK Nissin BP130 Series Horizontal Boring and Milling Machine Built for Speed and Precision

Elk Grove Village, IL - The SNK Nissin BP130 Series Horizontal Boring and Milling Machine from SNK America, Inc. is engineered for fast and accurate operation. The BP130 Series' high-powered boring spindle (5.1 diameter) performs at speeds from 5 to 2,500 rpm (optionally 3,500 rpm) with a torque of 2,793 ft/lb. A built-in rotary table provides a fifth axis of operation, and positioning control...

Read More »
Horizontal Machining Center offers spindle speed of 6,000 rpm.
Communication Systems & Equipment

Horizontal Machining Center offers spindle speed of 6,000 rpm.

Providing rapid traverse rate of 1,575 ipm, Model HN1000-S is capable of swinging parts up to 90.6 in. in dia and 72.8 in. in height. Machine features hybrid guideway system consisting of heavy-duty roller guide system on X- and Z-axes and hardened ground box way system on Y-axis. Minimizing need to extend quill to reach part, rigid spindle snout provides radial load capacity for heavy milling...

Read More »
Communication Systems & Equipment

Machining Centers have 5-axis trunnion design.

Engineered with Fanuc direct drive motor that drives both rotary and tilting axes, Nissin MAX i-Series Machining Centers complete part in one set-up, speeding production time. Trunnion mounting provides machining stability and accuracy, as well as enhanced contouring capabilities. Rigid table designs accommodate machining of larger parts, while cast iron frames with honeycomb design and bridge...

Read More »
Gang Tool Lathe incorporates FANUC robot option.

Gang Tool Lathe incorporates FANUC robot option.

Prodigy GT-27 has cross slide design and is offered with LR Mate 200iC Robot, featuring 6-axis brakes, single-phase R30-iA Mate Controller, and LR Handling Tool software. Lathe is suited for small parts turning and achieves 300 ipm feed rate and 800 ipm rapid traverse. It is constructed with C-Axis spindle standard, super polymer composite mineral base, and precision components. FANUC robot...

Read More »
Horizontal Machining Center handles medium/large sized parts.
Communication Systems & Equipment

Horizontal Machining Center handles medium/large sized parts.

Featuring traverse rates of 1,181 ipm and feed rates of 592 ipm on heavy-duty box ways, Niigata HN80D achieves full 50 hp cuts through advanced range geared headstock. Large diameter ball screws, coupled direct to ac digital servo motors, provide high thrust drilling. Spindle chiller unit removes excess heat from spindle and bearing housing. In addition, machining center includes automatic...

Read More »
Production Center handles medium-sized components.
Communication Systems & Equipment

Production Center handles medium-sized components.

Utilizing 12,000 rpm spindle with CAT 50 taper, Niigata SPN701 provides 43.3 in. swing diameter, 47.2 in. workpiece height, and XYZ travels of 39.4 x 37.4 x 33.5 in. Full 40 hp cuts are achieved through direct-drive headstock. Stationary columns mounted to T-shaped mono-cast base with traveling saddles or Box-in-a-Box(TM) structures enable rapid traverse rates of 2,362 ipm, while Automatic...

Read More »

SNK Nissin BP130 Series Horizontal Boring and Milling Machine Built for Speed and Precision

Elk Grove Village, IL - The SNK Nissin BP130 Series Horizontal Boring and Milling Machine from SNK America, Inc. is engineered for fast and accurate operation. The BP130 Series' high-powered boring spindle (5.1 diameter) performs at speeds from 5 to 2,500 rpm (optionally 3,500 rpm) with a torque of 2,793 ft/lb. A built-in rotary table provides a fifth axis of operation, and positioning control...

Read More »
Horizontal Machining Center offers spindle speed of 6,000 rpm.
Communication Systems & Equipment

Horizontal Machining Center offers spindle speed of 6,000 rpm.

Providing rapid traverse rate of 1,575 ipm, Model HN1000-S is capable of swinging parts up to 90.6 in. in dia and 72.8 in. in height. Machine features hybrid guideway system consisting of heavy-duty roller guide system on X- and Z-axes and hardened ground box way system on Y-axis. Minimizing need to extend quill to reach part, rigid spindle snout provides radial load capacity for heavy milling...

Read More »
Communication Systems & Equipment

Machining Centers have 5-axis trunnion design.

Engineered with Fanuc direct drive motor that drives both rotary and tilting axes, Nissin MAX i-Series Machining Centers complete part in one set-up, speeding production time. Trunnion mounting provides machining stability and accuracy, as well as enhanced contouring capabilities. Rigid table designs accommodate machining of larger parts, while cast iron frames with honeycomb design and bridge...

Read More »
Gang Tool Lathe incorporates FANUC robot option.

Gang Tool Lathe incorporates FANUC robot option.

Prodigy GT-27 has cross slide design and is offered with LR Mate 200iC Robot, featuring 6-axis brakes, single-phase R30-iA Mate Controller, and LR Handling Tool software. Lathe is suited for small parts turning and achieves 300 ipm feed rate and 800 ipm rapid traverse. It is constructed with C-Axis spindle standard, super polymer composite mineral base, and precision components. FANUC robot...

Read More »
Horizontal Machining Center handles medium/large sized parts.
Communication Systems & Equipment

Horizontal Machining Center handles medium/large sized parts.

Featuring traverse rates of 1,181 ipm and feed rates of 592 ipm on heavy-duty box ways, Niigata HN80D achieves full 50 hp cuts through advanced range geared headstock. Large diameter ball screws, coupled direct to ac digital servo motors, provide high thrust drilling. Spindle chiller unit removes excess heat from spindle and bearing housing. In addition, machining center includes automatic...

Read More »
Production Center handles medium-sized components.
Communication Systems & Equipment

Production Center handles medium-sized components.

Utilizing 12,000 rpm spindle with CAT 50 taper, Niigata SPN701 provides 43.3 in. swing diameter, 47.2 in. workpiece height, and XYZ travels of 39.4 x 37.4 x 33.5 in. Full 40 hp cuts are achieved through direct-drive headstock. Stationary columns mounted to T-shaped mono-cast base with traveling saddles or Box-in-a-Box(TM) structures enable rapid traverse rates of 2,362 ipm, while Automatic...

Read More »

All Topics