Cooper B-Line
Highland, IL 62249
Share:
Rods speed installation of channel trapeze supports.
Hot Rods(TM) feature 12 in. lengths of all-threaded rod completely assembled with rod coupling and locking hex nut on one end, and channel nut, square washer, and locking hex nut on other end. User attaches Hot Rods to pre-cut channel supports/trapezes and connects them to desired ATR lengths for completed trapeze support that is adjustable for setting elevations. Hot Rods come in Ã-¼, 3/8,...
Read More »Drive Pin Fasteners come pre-loaded with pin.
Pre-loaded Drive Pin Fasteners aid in installing cable hooks, strap hangers, wire or rod hangers, and conduit. Products come with 1Ã-¼ RamsetÃ-® PowerPoint drive pin pre-installed on bracket, hanger, or hook. Pins are rated for concrete up to 4,000 psi and steel up to Ã-¼ thick. Fasteners are suited for use with most powder actuated guns, including RamsetÃ-® and HiltiÃ-®.
Read More »Clamps help eliminate condensation issues.
ArmafixÃ-® Clamps retard heat gain and control condensation drip from cold-water plumbing, chilled water, and refrigeration lines. Closed-cell, elastomeric foam prevents flow of moisture vapor, while foam-to-foam bond prevents gaps in insulation system. Clamps help eliminate ceiling damage by preventing water staining or sagging caused by condensation drips at hanger locations. Non-skid strut...
Read More »Cable Tray offers knockout option.
Redi-Rail Knockout(TM) features straight section knockout option for installations where system needs to be enclosed or cables must exit through side rail. Side rail systems are 6 and 7 in. with Ã-½ to 1Ã-½ in. knockouts located on 9 in. centers.
Read More »Cabinets offer solution for data and network applications.
Series E2 Next Generation Cabinets are configurable to user specifications. They feature welded, 4-post frame with choice of 19 or 23 in. EIA square hole or No. 12-24 tapped rails. Ventilation options such as perforations, vents, and fans are available for doors, side panels, top, and base. Open base allows cable access from bottom, side, and rear. Colocation options offer up to 4 compartments....
Read More »Seismic Retrofit Bracket braces trapeze installations.
Model B650 is a California OSHPD-approved bracket, which allows installers to brace and support existing trapeze supports and single pipe hangers. It is comprised of bracket, key, and support plate, can be adjusted to fit angle of support. Unit is available for 3/8, 1/2, 5/8, and 3/4 in. all threaded rod. Finishes include zinc-plated, Dura-green, HDG, and SS4.
Read More »Rooftop Support Systems bear up to 2,500 lb.
C-Port Series Supports, made from recycled rubber, are non-penetrative and weighted to eliminate floating. They extend roof life, dampen vibrations, and eliminate need for supplemental rubber pads. Approved for any type of roofing material or other flat surfaces, UV-resistant supports are suited for refrigeration piping systems, HVAC equipment, roof walkways, conduit, and underfloor applications.
Read More »Cable Hook is bendable for adding and removing cable.
Designed with built-in cable retaining tab that can be bent multiple times by hand without breaking, BCH12Ã-¾ Cable Hook is suited for adding and removing cable. Suited for small runs of low voltage cables, product supports up to 16, 4-pair UTP CAT 5/5/e6 cables and may be used in security and other A/V applications.
Read More »Cable Support simplifies cable installation.
X-Hook(TM), with XylanÃ-® coating for smooth, frictionless surface, eliminates need for cable rollers. It is suitable for pulling cable and for use in corners, drop-outs, or any direction change in cable run. Three sizes are available and include Qwik-Latch(TM) cable retainer.
Read More »Rail Systems install easily to support and manage cables.
Data-TrackÃ-® features built-in barrier and is NEMA and CSA tested to 12C. Suitable for narrow spaces, Verti-RackÃ-® offers cable system separation and is expandable with Add-a-RungÃ-®. Half-RackÃ-® attaches directly to wall without spacers or brackets. Multi-Tier Half-RackÃ-® holds up to 4 tiers in one installation. Data-Track, Half-Rack, and Multi-Tier Half-Rack need no...
Read More »Rods speed installation of channel trapeze supports.
Hot Rods(TM) feature 12 in. lengths of all-threaded rod completely assembled with rod coupling and locking hex nut on one end, and channel nut, square washer, and locking hex nut on other end. User attaches Hot Rods to pre-cut channel supports/trapezes and connects them to desired ATR lengths for completed trapeze support that is adjustable for setting elevations. Hot Rods come in Ã-¼, 3/8,...
Read More »Drive Pin Fasteners come pre-loaded with pin.
Pre-loaded Drive Pin Fasteners aid in installing cable hooks, strap hangers, wire or rod hangers, and conduit. Products come with 1Ã-¼ RamsetÃ-® PowerPoint drive pin pre-installed on bracket, hanger, or hook. Pins are rated for concrete up to 4,000 psi and steel up to Ã-¼ thick. Fasteners are suited for use with most powder actuated guns, including RamsetÃ-® and HiltiÃ-®.
Read More »Clamps help eliminate condensation issues.
ArmafixÃ-® Clamps retard heat gain and control condensation drip from cold-water plumbing, chilled water, and refrigeration lines. Closed-cell, elastomeric foam prevents flow of moisture vapor, while foam-to-foam bond prevents gaps in insulation system. Clamps help eliminate ceiling damage by preventing water staining or sagging caused by condensation drips at hanger locations. Non-skid strut...
Read More »Cable Tray offers knockout option.
Redi-Rail Knockout(TM) features straight section knockout option for installations where system needs to be enclosed or cables must exit through side rail. Side rail systems are 6 and 7 in. with Ã-½ to 1Ã-½ in. knockouts located on 9 in. centers.
Read More »Cabinets offer solution for data and network applications.
Series E2 Next Generation Cabinets are configurable to user specifications. They feature welded, 4-post frame with choice of 19 or 23 in. EIA square hole or No. 12-24 tapped rails. Ventilation options such as perforations, vents, and fans are available for doors, side panels, top, and base. Open base allows cable access from bottom, side, and rear. Colocation options offer up to 4 compartments....
Read More »Seismic Retrofit Bracket braces trapeze installations.
Model B650 is a California OSHPD-approved bracket, which allows installers to brace and support existing trapeze supports and single pipe hangers. It is comprised of bracket, key, and support plate, can be adjusted to fit angle of support. Unit is available for 3/8, 1/2, 5/8, and 3/4 in. all threaded rod. Finishes include zinc-plated, Dura-green, HDG, and SS4.
Read More »Rooftop Support Systems bear up to 2,500 lb.
C-Port Series Supports, made from recycled rubber, are non-penetrative and weighted to eliminate floating. They extend roof life, dampen vibrations, and eliminate need for supplemental rubber pads. Approved for any type of roofing material or other flat surfaces, UV-resistant supports are suited for refrigeration piping systems, HVAC equipment, roof walkways, conduit, and underfloor applications.
Read More »Cable Hook is bendable for adding and removing cable.
Designed with built-in cable retaining tab that can be bent multiple times by hand without breaking, BCH12Ã-¾ Cable Hook is suited for adding and removing cable. Suited for small runs of low voltage cables, product supports up to 16, 4-pair UTP CAT 5/5/e6 cables and may be used in security and other A/V applications.
Read More »Cable Support simplifies cable installation.
X-Hook(TM), with XylanÃ-® coating for smooth, frictionless surface, eliminates need for cable rollers. It is suitable for pulling cable and for use in corners, drop-outs, or any direction change in cable run. Three sizes are available and include Qwik-Latch(TM) cable retainer.
Read More »Rail Systems install easily to support and manage cables.
Data-TrackÃ-® features built-in barrier and is NEMA and CSA tested to 12C. Suitable for narrow spaces, Verti-RackÃ-® offers cable system separation and is expandable with Add-a-RungÃ-®. Half-RackÃ-® attaches directly to wall without spacers or brackets. Multi-Tier Half-RackÃ-® holds up to 4 tiers in one installation. Data-Track, Half-Rack, and Multi-Tier Half-Rack need no...
Read More »