Desco Industries, Inc.
Chino, CA 91710

DESCO 81705 Bags come in Qualified Product Listing.
Meeting MIL-PRF-81705E Type III, Class 2 standards, DESCO 81705 Bags are listed in Qualified Product Listing under Defense Standardization Program. Bags are converted to per MIL-DTL-117H.
Read More »
Grounding Device converts non-ESD footwear to ESD footwear.
Used with normal footwear, Sole Grounder with Snap-Loc fastening system provides ESD control. Surface area is maximized for contact with floor, and tab-to-cup resistance- is 1 x 106 to < 1 x 108- Ω. Along with tear-resistant nylon reinforcement, features include 30 in. long, 8 conductive strand nylon polyester grounding tab and- 2 megohm series resistor. UL-listed product meets ANSI/ESD S20.20
Read More »
PCB Wash Tray Liner combines durability and compliance.
Made from nitrile rubber compound for use in PCB washing applications, model 41403 withstands abrasion, stretching, and tearing and may be used with soldering flux and other chemicals. This 0.072 x 18 x 18 in. liner fits baskets up to 18 in.-² and can be trimmed to fit smaller baskets. Point to Point Resistance (RTT) of 1 x 106 < 1 x 109 Ω meets ANSI/ESD S20.20 worksurface required limit- as...
Read More »
Foot Grounder converts non-ESD footwear to ESD footwear.
Constructed of non-marring, tear- and chemical-resistant, TPE material, stat-A-Rest™- consists of static dissipation unit sole that securely affixes to bottom of wearer's footwear through elastomer perimeter attachment system. This product, as alternative to strap-type products and ESD shoes, provides full coverage with contact points on sole and heel area. Walking voltage generation is
Read More »
Static Dissipative Gloves also protect against high heat.
Measuring 14 in. long from end of fingertip to base of cuff, Static Dissipative Hot Gloves with extended cuffs are made of dissipative polyester with Nomex-® lining. Construction protects wearer's hands and wrists up to 200-
Read More »
Rubber Liners for Cafeteria-Style Trays dissipate static.
Non-humidity dependent and RoHS 2 compliant Statfree T2™ Tray Liners are static dissipative, dual-layer nitrile rubber cut to fit 16 x 24 in.- cafeteria-style trays. At 0.060 in.- thick, mats will lay flat in tray. Top layer, available in- blue, dark blue, dark grey, and green,- is 1x106 to 1x109 Rtt, while black bottom layer is
Read More »
Wrist Strap/Footwear Tester verifies ESD compliance and safety.
Combo Tester (19280) verifies functionality of operator's wrist strap and footwear in ESD-protected area. Along with stainless steel test button, features include rocker switch for selecting- wrist strap or footwear test. Green light indicates passing result for wrist strap or footwear, while red and yellow lights plus audible alarm indicate failing result. Other versions are available...
Read More »
Nitrile Rubber ESD Workstation Mats are cleanroom packaged.
Ultrasonically cleaned, dried, and packaged in- Class 1000 controlled environment, Clean Packaged Statfree UC™ nitrile rubber ESD mats feature- dissipation top surface of 1 x 106 to < 1 x 109- Ω Rtt. Double bagging controls contamination of contents before being transferred to cleanroom, and several mat sizes are available: 16 x 24 in. (66310), 24 x 36 in. (66311),- 24 x 48 in. (66312), 24...
Read More »
ESD Control Smocks identify visiting personnel.
Made of polyester with 9% carbon conductive nylon fibers, Trustat White ESD Control Smocks have VISITOR dye sublimated on back to identify visiting personnel. Panel-to-panel resistance is 1 x 105 to < 1 x 109 Ω tested per ESD TR53. Available in XSmall, Small, Medium, and Large, USA-made smocks have snapping cuffs for adjustment.
Read More »
Epoxy Primers are formulated for ESD floor coating compatibility.
As- high-build, solvent-free system intended for use where odors/VOCs are unacceptable, light grey 46062 Statguard- provides self-leveling/penetrating epoxy primer for concrete floors. Medium viscosity/100% solids product offers coverage of ~200 ft-²/gal. As 2-component, catalyzed, water-based epoxy suited for use as- primer or topcoat for concrete, metal, and wood, light grey 46063 Statguard...
Read More »
DESCO 81705 Bags come in Qualified Product Listing.
Meeting MIL-PRF-81705E Type III, Class 2 standards, DESCO 81705 Bags are listed in Qualified Product Listing under Defense Standardization Program. Bags are converted to per MIL-DTL-117H.
Read More »
Grounding Device converts non-ESD footwear to ESD footwear.
Used with normal footwear, Sole Grounder with Snap-Loc fastening system provides ESD control. Surface area is maximized for contact with floor, and tab-to-cup resistance- is 1 x 106 to < 1 x 108- Ω. Along with tear-resistant nylon reinforcement, features include 30 in. long, 8 conductive strand nylon polyester grounding tab and- 2 megohm series resistor. UL-listed product meets ANSI/ESD S20.20
Read More »
PCB Wash Tray Liner combines durability and compliance.
Made from nitrile rubber compound for use in PCB washing applications, model 41403 withstands abrasion, stretching, and tearing and may be used with soldering flux and other chemicals. This 0.072 x 18 x 18 in. liner fits baskets up to 18 in.-² and can be trimmed to fit smaller baskets. Point to Point Resistance (RTT) of 1 x 106 < 1 x 109 Ω meets ANSI/ESD S20.20 worksurface required limit- as...
Read More »
Foot Grounder converts non-ESD footwear to ESD footwear.
Constructed of non-marring, tear- and chemical-resistant, TPE material, stat-A-Rest™- consists of static dissipation unit sole that securely affixes to bottom of wearer's footwear through elastomer perimeter attachment system. This product, as alternative to strap-type products and ESD shoes, provides full coverage with contact points on sole and heel area. Walking voltage generation is
Read More »
Static Dissipative Gloves also protect against high heat.
Measuring 14 in. long from end of fingertip to base of cuff, Static Dissipative Hot Gloves with extended cuffs are made of dissipative polyester with Nomex-® lining. Construction protects wearer's hands and wrists up to 200-
Read More »
Rubber Liners for Cafeteria-Style Trays dissipate static.
Non-humidity dependent and RoHS 2 compliant Statfree T2™ Tray Liners are static dissipative, dual-layer nitrile rubber cut to fit 16 x 24 in.- cafeteria-style trays. At 0.060 in.- thick, mats will lay flat in tray. Top layer, available in- blue, dark blue, dark grey, and green,- is 1x106 to 1x109 Rtt, while black bottom layer is
Read More »
Wrist Strap/Footwear Tester verifies ESD compliance and safety.
Combo Tester (19280) verifies functionality of operator's wrist strap and footwear in ESD-protected area. Along with stainless steel test button, features include rocker switch for selecting- wrist strap or footwear test. Green light indicates passing result for wrist strap or footwear, while red and yellow lights plus audible alarm indicate failing result. Other versions are available...
Read More »
Nitrile Rubber ESD Workstation Mats are cleanroom packaged.
Ultrasonically cleaned, dried, and packaged in- Class 1000 controlled environment, Clean Packaged Statfree UC™ nitrile rubber ESD mats feature- dissipation top surface of 1 x 106 to < 1 x 109- Ω Rtt. Double bagging controls contamination of contents before being transferred to cleanroom, and several mat sizes are available: 16 x 24 in. (66310), 24 x 36 in. (66311),- 24 x 48 in. (66312), 24...
Read More »
ESD Control Smocks identify visiting personnel.
Made of polyester with 9% carbon conductive nylon fibers, Trustat White ESD Control Smocks have VISITOR dye sublimated on back to identify visiting personnel. Panel-to-panel resistance is 1 x 105 to < 1 x 109 Ω tested per ESD TR53. Available in XSmall, Small, Medium, and Large, USA-made smocks have snapping cuffs for adjustment.
Read More »
Epoxy Primers are formulated for ESD floor coating compatibility.
As- high-build, solvent-free system intended for use where odors/VOCs are unacceptable, light grey 46062 Statguard- provides self-leveling/penetrating epoxy primer for concrete floors. Medium viscosity/100% solids product offers coverage of ~200 ft-²/gal. As 2-component, catalyzed, water-based epoxy suited for use as- primer or topcoat for concrete, metal, and wood, light grey 46063 Statguard...
Read More »