Allen Engineering Corporation

Reversible Plate Compactors feature two exciter shafts.
Construction Equipment and Supplies

Reversible Plate Compactors feature two exciter shafts.

Available in- three models with 9.3 hp Honda gas-powered engine or Hatz diesel-powered engine, Reversible Plate Compactors deliver up to 11,241 lb of centrifugal force. Compactors feature travel speed up to 85 fpm, working width from 20–25 in., and 4,200–5,400 vpm. Capable of operating in tight spaces, machines are suitable for large foundations, retaining walls, and compaction of side areas...

Read More »
Reversible Plate Compactors feature two exciter shafts.
Construction Equipment and Supplies

Reversible Plate Compactors feature two exciter shafts.

Available inÂ- three models with 9.3 hp Honda gas-powered engine or Hatz diesel-powered engine, Reversible Plate Compactors deliver up to 11,241 lb of centrifugal force. Compactors feature travel speed up to 85 fpm, working width from 20–25 in., and 4,200–5,400 vpm. Capable of operating in tight spaces, machines are suitable for large foundations, retaining walls, and compaction of side...

Read More »
Mid-Size Rammers prepare jobsites for flat finish.
Architectural & Civil Engineering Products

Mid-Size Rammers prepare jobsites for flat finish.

Employing GXR120 Honda engine, ATC130H and ATC170H are suited for use in confined spaces, deliver 650–700 blows per minute, and offer 2,800–3,500 lb of impact force. Design incorporates protection for engine, and 3-way throttle lever shuts down engine as well as fuel supply. Along with built-in tachometer and hour meter, rammers offer capacities of up to 3,800 ft-²/hr compacted area and are...

Read More »
Mid-Size Rammers prepare jobsites for flat finish.
Architectural & Civil Engineering Products

Mid-Size Rammers prepare jobsites for flat finish.

Employing GXR120 Honda engine, ATC130H and ATC170H are suited for use in confined spaces, deliver 650–700 blows per minute, and offer 2,800–3,500 lb of impact force. Design incorporates protection for engine, and 3-way throttle lever shuts down engine as well as fuel supply. Along with built-in tachometer and hour meter, rammers offer capacities of up to 3,800 ftÂ-²/hr compacted area and...

Read More »
Laser-Guided Screed meets or exceeds F-number requirements.
Construction Equipment and Supplies

Laser-Guided Screed meets or exceeds F-number requirements.

This new LS175 laser guided screed was engineered to meet or exceed today’s tough “F” number requirements for floor levelness while being the most effective laser screeding system in its class.  For over 40 years, Allen Equipment has set the industry standard for precision levelness, rigidity and durability.  The LS175 screeds 192 square feet per pass, utilizing the 12’ wide screeding...

Read More »
Laser-Guided Screed meets or exceeds F-number requirements.
Construction Equipment and Supplies

Laser-Guided Screed meets or exceeds F-number requirements.

This new LS175 laser guided screed was engineered to meet or exceed today’s tough “F” number requirements for floor levelness while being the most effective laser screeding system in its class.-  For over 40 years, Allen Equipment has set the industry standard for precision levelness, rigidity and durability.  The LS175 screeds 192 square feet per pass, utilizing the 12’ wide...

Read More »
Reversible Plate Compactors feature two exciter shafts.
Construction Equipment and Supplies

Reversible Plate Compactors feature two exciter shafts.

Available in- three models with 9.3 hp Honda gas-powered engine or Hatz diesel-powered engine, Reversible Plate Compactors deliver up to 11,241 lb of centrifugal force. Compactors feature travel speed up to 85 fpm, working width from 20–25 in., and 4,200–5,400 vpm. Capable of operating in tight spaces, machines are suitable for large foundations, retaining walls, and compaction of side areas...

Read More »
Reversible Plate Compactors feature two exciter shafts.
Construction Equipment and Supplies

Reversible Plate Compactors feature two exciter shafts.

Available inÂ- three models with 9.3 hp Honda gas-powered engine or Hatz diesel-powered engine, Reversible Plate Compactors deliver up to 11,241 lb of centrifugal force. Compactors feature travel speed up to 85 fpm, working width from 20–25 in., and 4,200–5,400 vpm. Capable of operating in tight spaces, machines are suitable for large foundations, retaining walls, and compaction of side...

Read More »
Mid-Size Rammers prepare jobsites for flat finish.
Architectural & Civil Engineering Products

Mid-Size Rammers prepare jobsites for flat finish.

Employing GXR120 Honda engine, ATC130H and ATC170H are suited for use in confined spaces, deliver 650–700 blows per minute, and offer 2,800–3,500 lb of impact force. Design incorporates protection for engine, and 3-way throttle lever shuts down engine as well as fuel supply. Along with built-in tachometer and hour meter, rammers offer capacities of up to 3,800 ft-²/hr compacted area and are...

Read More »
Mid-Size Rammers prepare jobsites for flat finish.
Architectural & Civil Engineering Products

Mid-Size Rammers prepare jobsites for flat finish.

Employing GXR120 Honda engine, ATC130H and ATC170H are suited for use in confined spaces, deliver 650–700 blows per minute, and offer 2,800–3,500 lb of impact force. Design incorporates protection for engine, and 3-way throttle lever shuts down engine as well as fuel supply. Along with built-in tachometer and hour meter, rammers offer capacities of up to 3,800 ftÂ-²/hr compacted area and...

Read More »
Laser-Guided Screed meets or exceeds F-number requirements.
Construction Equipment and Supplies

Laser-Guided Screed meets or exceeds F-number requirements.

This new LS175 laser guided screed was engineered to meet or exceed today’s tough “F” number requirements for floor levelness while being the most effective laser screeding system in its class.  For over 40 years, Allen Equipment has set the industry standard for precision levelness, rigidity and durability.  The LS175 screeds 192 square feet per pass, utilizing the 12’ wide screeding...

Read More »
Laser-Guided Screed meets or exceeds F-number requirements.
Construction Equipment and Supplies

Laser-Guided Screed meets or exceeds F-number requirements.

This new LS175 laser guided screed was engineered to meet or exceed today’s tough “F” number requirements for floor levelness while being the most effective laser screeding system in its class.-  For over 40 years, Allen Equipment has set the industry standard for precision levelness, rigidity and durability.  The LS175 screeds 192 square feet per pass, utilizing the 12’ wide...

Read More »

All Topics