Walter USA, Inc.

Stainless Steel Roughing Geometry increases productivity.
Laboratory and Research Supplies and Equipment

Stainless Steel Roughing Geometry increases productivity.

RM5 provides guided twin-channel coolant, targeted at chip, to maximize cooling and promote tool life for machining ISO M stainless steels and ISO S high-temperature alloys. For added cutting efficacy, part uses Tiger·tec® Silver PVD Al2O3 cutting tool inserts in grades WSM10S, WSM20S, and WSM30S as well as Tiger·tec Silver CVD cutting tool material in WMP20S grade. Design of...

Read More »
Solid Carbide Drill comes in 2 additional sizes.
Mechanical Components and Assemblies

Solid Carbide Drill comes in 2 additional sizes.

Offered in additional sizesÂ- of 25xDc and 30xDc, internally cooled DC170 Supreme is aimed at ISO material groups P, K, and H. Design of lands is key to performance, with shallow cooling grooves at drill end. Coolant flow encompasses entire drill point, producing optimal cooling of both drill and workpiece interface and inhibiting chip packing. Additionally, ability to control coolant flow...

Read More »
Ramping Cutter machines non-ferrous metals such as aluminum.
Laboratory and Research Supplies and Equipment

Ramping Cutter machines non-ferrous metals such as aluminum.

Featuring V-shaped cutting edge and protection against centrifugal force at insert contact surface, M2131 SkyÂ-·tec™ Ramping Cutter is suitable for rough milling and semi-finishing of pockets with high chip volume in non-ferrous metals, such as aluminum wrought alloys or aluminum lithium alloys used in aircraft components. Tool has 0.59 or 0.78 in. max cutting depth and 0.98–3.14...

Read More »
Rough Turning Insert Geometry comes in 4 shapes and 4 grades.
Construction Equipment and Supplies

Rough Turning Insert Geometry comes in 4 shapes and 4 grades.

Promoting process reliability in rough turning, double-sided ISO indexable inserts with RP7 geometry combine ground contact surface with profileÂ- featuring tailored protective chamfer that guards against fracturing. Other features include T-land for protection against chipping, ground seating surface, center curve design for increased cutting edge strength, and chip groove depth able to...

Read More »
Helical Milling Cutters provide generous chip clearance.
Laboratory and Research Supplies and Equipment

Helical Milling Cutters provide generous chip clearance.

Utilizing system insert concept that allows one insert to be used in variety of tools, Models M4256, M4257, and M4258 support wide array of milling operations, including slot milling, ramping, pocket milling, shoulder milling, and circular interpolation. Standard inserts are available for applications in steel, cast iron, stainless steels, and difficult-to-cut materials. Mounting configurations...

Read More »
Walter to Feature Advanced Cutting Tool Technologies at IMTS '16
Architectural & Civil Engineering Products

Walter to Feature Advanced Cutting Tool Technologies at IMTS '16

Waukesha, WI — Walter, a leading cutting tool manufacturer, will showcase its latest technologies in Booth W-1700 at IMTS ’16, September 12-17, 2016, McCormick Place, Chicago, IL. Highlights of the exhibit will include the Walter M4000 program which uses an innovative insert system that has a single, basic shape compatibility with every M4000 body. The inserts can be used in all tools within...

Read More »
PCD Inserts offer optimized wear resistance.
Construction Equipment and Supplies

PCD Inserts offer optimized wear resistance.

Made of polycrystalline diamond, WDN10 Inserts deliver optimized hardness, low coefficient of friction, and minimum heat distortion, helping to maximize productivity in high-speed machining of non-ferrous materials. Cutting edge sharpness, resulting from PCD grain size and manufacturing process, enables inserts to achieve optimized surface finishes. Products boast chip breaker geometry and are...

Read More »
Heavy-Duty Milling Cutter aids large component machining.
Agricultural & Farming Products

Heavy-Duty Milling Cutter aids large component machining.

Primarily intended for milling and boring machines, Walter BLAXX M3016 is compatible with ISO material groups P, M, and K and suited for such difficult applications as machining frames made from cast iron for large molds or housings for wind energy rotor hubs. Carbide axial stop and use of 4 grades of Tiger™Ã‚-·tec® Silver cutting tool material help optimize tool life and process...

Read More »
Indexable Inserts offer high temperature and wear resistance.
Construction Equipment and Supplies

Indexable Inserts offer high temperature and wear resistance.

Available for all XtraÂ-·tec® and M4000 face and shoulder mills, as well as Walter F2334 copy milling cutter, Tiger·tec® Silver grade WSM45X Inserts combine high-performance substrate and AI2O3 coating for optimized toughness and hardness when working with materials that have difficult cutting properties, such as titanium alloys. Extremely smooth surfaces minimize edge...

Read More »
New Wear-Optimization app from Walter Helps Users Decrease Wear Rates and Associated Costs
Software

New Wear-Optimization app from Walter Helps Users Decrease Wear Rates and Associated Costs

Cost are reduced thanks to optimized use of solid carbide and indexable insert tools with new interactive and easy to use, multi-platform, wear-optimization app. Waukesha, WI - What if your tools could talk to you, providing you with timely information about their status and the conditions they were encountering, as well as tips that enhance your specific application? With Walter’s new...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers