Walter USA, Inc.

Walter Introduces G3011/G3021 Groovng System with Tiger-Tec Silver PVD Carbide Grades
Machinery & Machining Tools

Walter Introduces G3011/G3021 Groovng System with Tiger-Tec Silver PVD Carbide Grades

The G3011/G3021 Groovng System with MX grooving inserts improves productivity and reduces downtime. The inserts are available with widths ranging from 0.80 to 3.25 mm with a cutting depth of 6 mm and come with self-aligning tangential clamping. The holders are offered Tiger•tec® Silver PVD grades that reduce wear and exhibits toughness. The inserts feature four cutting edges per each insert...

Read More »
New Milling Cutter Has an Approach Angle of 90 Degrees
Laboratory and Research Supplies and Equipment

New Milling Cutter Has an Approach Angle of 90 Degrees

The M4258 modular helical milling cutter from Walter is available in Tiger∙tec® Gold and Six Tiger∙tec® Silver​​​ grades. It can be used for slot milling, ramping, pocket milling, shoulder milling, and circular interpolation. The cutter can handle ISO material groups P, M, K, and S. The M4258 has a diameter range of 2.0, 2.5, and 3.0 in. It features interfaces that are Walter Capto C6...

Read More »
New A60/AG60 Cut MX Indexable Inserts are Designed for Small to Medium Pitch Threads
Construction Equipment and Supplies

New A60/AG60 Cut MX Indexable Inserts are Designed for Small to Medium Pitch Threads

Walter’s A60/AG60 Walter Cut MX Indexable Grooving Inserts are designed for providing 60° partial-profile external threads in range of pitches 6-48 TPI—threads per inch. The units are offered with four cutting edges and are suitable for thread-turning in tight spaces. With its unique insert seat pockets, the inserts with different thicknesses can be used in same holder. Walter’s MX system...

Read More »
New Cermet WEP10 Indexable Turning Inserts Feature FP4 Soft-Cutting Geometry
Construction Equipment and Supplies

New Cermet WEP10 Indexable Turning Inserts Feature FP4 Soft-Cutting Geometry

Walter’s Cermet WEP10 Indexable Turning Inserts come with fine-grain titanium carbide substrate with Ni/Co binder. The unit’s FP4 geometry with edge preparation yields mirror finish surfaces at high or low cutting speeds. The WEP10 inserts are suitable for finishing operations for steels, stainless steels, and cast iron workpieces in metalworking, mechanical engineering, energy and automotive...

Read More »
New WSM01 Grade with MS3 Geometry is Suitable for Machining Unstable or Thin-Walled Components
Construction Equipment and Supplies

New WSM01 Grade with MS3 Geometry is Suitable for Machining Unstable or Thin-Walled Components

Walter offers WSM01 Grade coupled with MS3 negative geometry for producing burr-free results with an improved surface finish quality in the hard materials. The grade's high power impulse magnetron sputtering PVD coating produces smooth surfaces. The Unit is suitable for machining ISO S materials such as titanium alloys, cobalt-based alloys and nickel-based alloys. The MS3 insert comes with...

Read More »
New WSM01 Grade with MS3 Geometry is Suitable for Machining Unstable or Thin-Walled Components
Construction Equipment and Supplies

New WSM01 Grade with MS3 Geometry is Suitable for Machining Unstable or Thin-Walled Components

Walter offers WSM01 Grade coupled with MS3 negative geometry for producing burr-free results with improved surface finish quality in the hard materials. The grade's high power impulse magnetron sputtering PVD coating produces smooth surfaces. Unit is suitable for machining ISO S materials such as titanium alloys, cobalt-based alloys and nickel-based alloys. MS3 insert comes with jet-guiding...

Read More »
New Solid Carbide Drill Features WJ30ET Grade and Superior Positioning Accuracy
Mechanical Components and Assemblies

New Solid Carbide Drill Features WJ30ET Grade and Superior Positioning Accuracy

Walter USA introduces the DC160 Advance solid carbide drill available in 3, 5 and 8xD. The drill has an internal coolant and a cylindrical shank ground to an h6 tolerance. The drill’s margins ensure rapid guidance in the hole and a steep gash angle provides improved hole quality as well as reduced feed force. The versatile drill is suitable for ISO material types P, M, K, N, S, H and O.

Read More »
New D4140 Replaceable Tip Drills Come with Hardened and Polished Surface
Agricultural & Farming Products

New D4140 Replaceable Tip Drills Come with Hardened and Polished Surface

Walter’s D4140 replaceable tip drills are available in3 x D, 5 x D and 7 x D and in 0.47 in. to 1.26 in. diameter. The design of the drills feature precision coolant delivery directly to the cutting edge. Unit’s 100° prismatic insert seating for P600x Xtra•tec® point inserts ensure quality holes. D4140 drills come with ground and polished flutes for secure chip evacuation.  

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers