Quicksilver Controls, Inc
San Dimas, CA 91773
Share:
Servo Motor Controller operates from 12-48 Vdc input power.
CiA DSP 402 CANopen servo motor controller, QCI-D2-IGK, SilverDust IGK is stand alone, single axis controller that includes serial communications (RS-232, RS-485), CANopen and 7 I/O. Features included are 32K non-volatile memory, 100:1 inertial miss-match, PVIA(TM) servo loop, electronic gearing/camming, and multiple thread programming. Product also has built-in voltage clamp, and point to point...
Read More »
Motion Controller drives brushless servo motors.
As driver for NEMA 11, 17, and 23 frame brushless servo motors, CANopen DSP 402 (CiA DSP 402 v3.0) defines such functions as start-up and homing techniques and motion profiles. It can be used on any SilverDust programmable servo motor controller that supports CANopen, and host controller supporting CiA 402 could command multiple CiA 402 motor controllers from multiple vendors. CiA 402 runs on top...
Read More »
Servo Motor Controller is CANopen enabled.
Designed for NEMA 17 and NEMA 23 frame I-Grade servo motors, SilverDust IGC single axis controller comes with serial communications (RS-232, RS-485), CANopen and, 7 I/O, and includes breakouts for power and communications. Other features include 12-48 Vdc input power, built-in voltage clamp/braking resistor, 4 analog inputs, and 32 K non-volatile memory, along with 100:1 inertial miss-match,...
Read More »
Linear Servo Motor provides acceleration up to 8.4 G.
Featuring full servo control and max velocity of 6.4 ft/sec, Model QCI-L6 is suited for high acceleration moves such as pick-and-place, wire bonding, semiconductor, and parts inspection. Servo control eliminates problems of resonance, stalling, and excess heating. One micron encoder allows for Ã-
Read More »
Servomotor fits in small places.
With face plate measuring 1.1 in. and length of 2 in., Model M11-1 direct-drive servomotor generates 9 oz-in. of continuous torque and comes with 4,000 count/rev encoder. When combined with servo controller/drivers, NEMA 11 frame motor creates high torque servo control system at speeds up to 4,000 rpm. Requiring 1.3 A power from 12-48 V supply, motor handles inertial miss-matches of 100 x 1 and...
Read More »Cable Adapters suit NEMA 17 or NEMA 23 motors.
Right angle motor cable adapters, QCI-D15HD-R1 and QCI-D15HD-R2, are designed for 15 pin D shell motor connector (D15HD). QCI-D15HD-R1 routes cable toward motor shaft and QCI-D15HD-R2 routes cable away from shaft. Units are 1 in. high and include screws to secure adapter to motor. Adapters are capable of handling full horsepower of SilverNugget N2 and SilverDust D2 servo controller/driver,...
Read More »Servo Controller integrates programmable limit switch.
Delivering servo control of NEMA 17 and 23 frame microstep motors, SilverDust(TM) controller/driver features Programmable Limit Switch (PLS) output that can be configured to use any of the available 23 I/O to change states at over 150 pre-defined trigger points. A modulo may be selected to repeat cycle. Output triggering, trigger point values, and number of trigger points can be changed even...
Read More »Step Motors exceed IP65 standard.
Based on NEMA 34 frame, Step Motors develop continuous stall torques from 460-2,550 oz-in. and peak output levels to 580 W. Input drive voltages range from 12-48 Vdc. Two round industrial connectors, rated to IP65, are used for encoder and motor signals. All motors are equipped with 16,000 count/rev encoder. Closed loop, servo control is provided by SilverNugget controller/driver.
Read More »
Servo Controller/Driver works with microstep motors.
Featuring sixteen 5-24 Vdc, isolated, bi-directional I/O and 4 analog inputs, SilverDust IGB provides closed loop control for NEMA 17 and NEMA 23 frame I-Grade motor/encoders. Single-axis unit accepts 12-48 Vdc input power and has voltage clamp circuit that dissipates excess power regenerated during rapid decelerations. Along with breakouts for power, communications, and I/O, product has 32K...
Read More »
Servo Control System meets IP50 standards.
SilverNugget I-Grade System provides servo control of 17 or 23 frame micro step motor utilizing single cable for both motor and encoder signals. Motors with 34 frame have second cable to handle high current motor signals. Controller/driver and motor/encoders use standard DB15 data connector for 7 I/O and communications signals. System features low EMI emission and is suited for dusty environments.
Read More »
Servo Motor Controller operates from 12-48 Vdc input power.
CiA DSP 402 CANopen servo motor controller, QCI-D2-IGK, SilverDust IGK is stand alone, single axis controller that includes serial communications (RS-232, RS-485), CANopen and 7 I/O. Features included are 32K non-volatile memory, 100:1 inertial miss-match, PVIA(TM) servo loop, electronic gearing/camming, and multiple thread programming. Product also has built-in voltage clamp, and point to point...
Read More »
Motion Controller drives brushless servo motors.
As driver for NEMA 11, 17, and 23 frame brushless servo motors, CANopen DSP 402 (CiA DSP 402 v3.0) defines such functions as start-up and homing techniques and motion profiles. It can be used on any SilverDust programmable servo motor controller that supports CANopen, and host controller supporting CiA 402 could command multiple CiA 402 motor controllers from multiple vendors. CiA 402 runs on top...
Read More »
Servo Motor Controller is CANopen enabled.
Designed for NEMA 17 and NEMA 23 frame I-Grade servo motors, SilverDust IGC single axis controller comes with serial communications (RS-232, RS-485), CANopen and, 7 I/O, and includes breakouts for power and communications. Other features include 12-48 Vdc input power, built-in voltage clamp/braking resistor, 4 analog inputs, and 32 K non-volatile memory, along with 100:1 inertial miss-match,...
Read More »
Linear Servo Motor provides acceleration up to 8.4 G.
Featuring full servo control and max velocity of 6.4 ft/sec, Model QCI-L6 is suited for high acceleration moves such as pick-and-place, wire bonding, semiconductor, and parts inspection. Servo control eliminates problems of resonance, stalling, and excess heating. One micron encoder allows for Ã-
Read More »
Servomotor fits in small places.
With face plate measuring 1.1 in. and length of 2 in., Model M11-1 direct-drive servomotor generates 9 oz-in. of continuous torque and comes with 4,000 count/rev encoder. When combined with servo controller/drivers, NEMA 11 frame motor creates high torque servo control system at speeds up to 4,000 rpm. Requiring 1.3 A power from 12-48 V supply, motor handles inertial miss-matches of 100 x 1 and...
Read More »QuickSilver Adds CAN to the SilverDust(TM)
QuickSilver Controls, Inc., adds CAN bus to its SilverDust(TM) IGB servo motion controller/driver for servo control of NEMA 17 and 23 frame stepmotors. The CANopen compatible interface is fully isolated and supports up to 64 devices on the 1MB bus. The addition of CANopen enhances the motion controller's unique ability to servo microstep motors by allowing one servo to modify the motion of...
Read More »Cable Adapters suit NEMA 17 or NEMA 23 motors.
Right angle motor cable adapters, QCI-D15HD-R1 and QCI-D15HD-R2, are designed for 15 pin D shell motor connector (D15HD). QCI-D15HD-R1 routes cable toward motor shaft and QCI-D15HD-R2 routes cable away from shaft. Units are 1 in. high and include screws to secure adapter to motor. Adapters are capable of handling full horsepower of SilverNugget N2 and SilverDust D2 servo controller/driver,...
Read More »Servo Controller integrates programmable limit switch.
Delivering servo control of NEMA 17 and 23 frame microstep motors, SilverDust(TM) controller/driver features Programmable Limit Switch (PLS) output that can be configured to use any of the available 23 I/O to change states at over 150 pre-defined trigger points. A modulo may be selected to repeat cycle. Output triggering, trigger point values, and number of trigger points can be changed even...
Read More »Step Motors exceed IP65 standard.
Based on NEMA 34 frame, Step Motors develop continuous stall torques from 460-2,550 oz-in. and peak output levels to 580 W. Input drive voltages range from 12-48 Vdc. Two round industrial connectors, rated to IP65, are used for encoder and motor signals. All motors are equipped with 16,000 count/rev encoder. Closed loop, servo control is provided by SilverNugget controller/driver.
Read More »
Servo Controller/Driver works with microstep motors.
Featuring sixteen 5-24 Vdc, isolated, bi-directional I/O and 4 analog inputs, SilverDust IGB provides closed loop control for NEMA 17 and NEMA 23 frame I-Grade motor/encoders. Single-axis unit accepts 12-48 Vdc input power and has voltage clamp circuit that dissipates excess power regenerated during rapid decelerations. Along with breakouts for power, communications, and I/O, product has 32K...
Read More »