Acces I/O Products
San Diego, CA 92121
USB/RS-232 Serial Adapter enhances Android device connectivity.
By using Android Open Accessory protocol toÃ- make Android device recognize onboard USB portÃ- as RS-232 port, ANDROID-232 lets users control legacy RS-232 devices directly from Android devices and vice-versa. This industrial- and military-grade, 2-way data port supports serial data rate up to 921.6 kbps (max of 115.2 kbps without flow control), and onboard circuitry provides power to...
Read More »
PCI Express Serial Communication Cards offer speeds up to 3 Mbps.
Available in 6 models, PCIe-ICM Series cards come with 4- or 2-ports of isolated, software selectable, RS-232, RS-422, and RS-485 serial protocols. Data communication rates up to 921.6 Kbps are supported by each RS-232 port, while RS-422 and RS-485 ports support speeds up to 3 Mbps. Cards feature x1 lane PCI Express connector which can be used in any x1, x2, x4, x8, x12, or x16 PCI Express...
Read More »
PCIe Digital I/O Cards offer change of state detection.
Respectively featuring 48 and 24 channel high-current TTL DIO lines, PCIe-DIO-48S and PCIe-DIO-24S offer change of state detection and interrupt capabilities. Products are compatible with industry standard 8255 PPI and offer two 50-pin male headers with 24 digital lines each. User interrupt pin is featured on each DIO connector, and all 48 DIO lines are buffered with 32 mA source/64 mA sink...
Read More »
PCIe Serial Communication Cards have low-profile design.
Respectively featuring 8 and 4 ports, PCIe-COM232-8 and PCIe-COM232-4 are PCIe RS-232 serial communication cards with low-profile PCIe MD1 form factor. Plug-and-play units support data communication speeds to 921.6 kbps (standard model 460.8 kbps) and integrate 16C950 class UARTs with 128-byte FIFO for each TX and RX. Along with Ã-
Read More »
Watchdog Timer Card monitors program and operating system.
Offering software-selectable timeout from 4 Ã-µsec, Model P104-WDG-CSMA contains watchdog timer that monitors operation of application program and operating system to initiate system reset in case of lockup. Card can also monitor and control variety of system hardware parameters. Featuring 2 general purpose 8-bit A/D inputs and 2 current-limited, isolated outputs, P104-WDG-CSMA provides...
Read More »
USB Analog Output Modules offer diverse multifunctionality.
Comprised of 10 USB-based data acquisition and control I/O modules, USB-AO Series offers unipolar and bipolar output ranges with 12- and 16-bit resolution. High-speed USB 2.0, multifunction board USB-AO16-16A features 16 channels of 16-bit resolution analog outputs along with two 16-bit analog inputs and 16 DIO lines. It can be used in any PC or embedded system with USB port. All analog output...
Read More »
Serial Communication Adapter offers 4 RS-232/422/485 ports.
Offering choice of 4 field-selectable RS-232/422/485 protocols per port, USB-FLEXCOM4 is designed for use in systems where there are not enough serial ports to communicate with legacy devices. It conforms to USB/104 form factor for flexible mounting in PC/104 or USB/104 stacks and is suited for adding portable serial ports to any PC or embedded system with 1.1- or 2.0-compatible USB port. This...
Read More »
USB Module provides 96 or 48 lines of digital I/O.
Designed for control and monitoring applications, Model USB-DIO-96 lets users add portable digital I/O to any PC or embedded system with USB port. Hot-pluggable device is fully compatible with USB 1.1 and 2.0 ports, and uses 2 or 4 50-pin IDC-type shrouded headers with 24 lines per connector. All I/O lines are buffered with 32 mA source, 64 mA sink current capabilities. Utility 5 Vdc is available...
Read More »
I/O Module expands Pico-ITXe single board computers.
Pico-I/O(TM) Model PICO-DIO16RO8 features 16 TTL/LVTTL digital I/Os and 8 form C electromechanical relay outputs. All 16 I/O lines are buffered with 32 mA sink/source current capabilities. Mix of programmable inputs and outputs, along with dedicated relays, provides flexibility for system designers. Small form factor product, which occupies half of PC/104 board, has bus and power connections...
Read More »
Wireless I/O Relay Modules do not require PC connection.
Supplied in NEMA4 enclosure, Model WWP-IIRO-8 features one pair of intelligent 16-channel DIO units that communicate directly with each other. Each unit contains 8 Form C (SPDT) electromechanical relays and 8 optically isolated digital inputs. When isolated input is toggled on one of units, it will cause corresponding relay to switch on other unit. Operating distances are rated up to 7 miles...
Read More »USB/RS-232 Serial Adapter enhances Android device connectivity.
By using Android Open Accessory protocol toÃ- make Android device recognize onboard USB portÃ- as RS-232 port, ANDROID-232 lets users control legacy RS-232 devices directly from Android devices and vice-versa. This industrial- and military-grade, 2-way data port supports serial data rate up to 921.6 kbps (max of 115.2 kbps without flow control), and onboard circuitry provides power to...
Read More »
PCI Express Serial Communication Cards offer speeds up to 3 Mbps.
Available in 6 models, PCIe-ICM Series cards come with 4- or 2-ports of isolated, software selectable, RS-232, RS-422, and RS-485 serial protocols. Data communication rates up to 921.6 Kbps are supported by each RS-232 port, while RS-422 and RS-485 ports support speeds up to 3 Mbps. Cards feature x1 lane PCI Express connector which can be used in any x1, x2, x4, x8, x12, or x16 PCI Express...
Read More »
PCIe Digital I/O Cards offer change of state detection.
Respectively featuring 48 and 24 channel high-current TTL DIO lines, PCIe-DIO-48S and PCIe-DIO-24S offer change of state detection and interrupt capabilities. Products are compatible with industry standard 8255 PPI and offer two 50-pin male headers with 24 digital lines each. User interrupt pin is featured on each DIO connector, and all 48 DIO lines are buffered with 32 mA source/64 mA sink...
Read More »
PCIe Serial Communication Cards have low-profile design.
Respectively featuring 8 and 4 ports, PCIe-COM232-8 and PCIe-COM232-4 are PCIe RS-232 serial communication cards with low-profile PCIe MD1 form factor. Plug-and-play units support data communication speeds to 921.6 kbps (standard model 460.8 kbps) and integrate 16C950 class UARTs with 128-byte FIFO for each TX and RX. Along with Ã-
Read More »
Watchdog Timer Card monitors program and operating system.
Offering software-selectable timeout from 4 Ã-µsec, Model P104-WDG-CSMA contains watchdog timer that monitors operation of application program and operating system to initiate system reset in case of lockup. Card can also monitor and control variety of system hardware parameters. Featuring 2 general purpose 8-bit A/D inputs and 2 current-limited, isolated outputs, P104-WDG-CSMA provides...
Read More »
USB Analog Output Modules offer diverse multifunctionality.
Comprised of 10 USB-based data acquisition and control I/O modules, USB-AO Series offers unipolar and bipolar output ranges with 12- and 16-bit resolution. High-speed USB 2.0, multifunction board USB-AO16-16A features 16 channels of 16-bit resolution analog outputs along with two 16-bit analog inputs and 16 DIO lines. It can be used in any PC or embedded system with USB port. All analog output...
Read More »
Serial Communication Adapter offers 4 RS-232/422/485 ports.
Offering choice of 4 field-selectable RS-232/422/485 protocols per port, USB-FLEXCOM4 is designed for use in systems where there are not enough serial ports to communicate with legacy devices. It conforms to USB/104 form factor for flexible mounting in PC/104 or USB/104 stacks and is suited for adding portable serial ports to any PC or embedded system with 1.1- or 2.0-compatible USB port. This...
Read More »
USB Module provides 96 or 48 lines of digital I/O.
Designed for control and monitoring applications, Model USB-DIO-96 lets users add portable digital I/O to any PC or embedded system with USB port. Hot-pluggable device is fully compatible with USB 1.1 and 2.0 ports, and uses 2 or 4 50-pin IDC-type shrouded headers with 24 lines per connector. All I/O lines are buffered with 32 mA source, 64 mA sink current capabilities. Utility 5 Vdc is available...
Read More »
I/O Module expands Pico-ITXe single board computers.
Pico-I/O(TM) Model PICO-DIO16RO8 features 16 TTL/LVTTL digital I/Os and 8 form C electromechanical relay outputs. All 16 I/O lines are buffered with 32 mA sink/source current capabilities. Mix of programmable inputs and outputs, along with dedicated relays, provides flexibility for system designers. Small form factor product, which occupies half of PC/104 board, has bus and power connections...
Read More »
Wireless I/O Relay Modules do not require PC connection.
Supplied in NEMA4 enclosure, Model WWP-IIRO-8 features one pair of intelligent 16-channel DIO units that communicate directly with each other. Each unit contains 8 Form C (SPDT) electromechanical relays and 8 optically isolated digital inputs. When isolated input is toggled on one of units, it will cause corresponding relay to switch on other unit. Operating distances are rated up to 7 miles...
Read More »