Apex Tool Group
Suite A
Sparks, MD 21152
New u-GUARD Non-marring Covered Tools Includes Bits, Bit Holders and Nutsetters
Allow the user to grab directly onto the drive tool while it spins freely inside the covers. Provides protection and control on the jobsite. Protects from scratching or damages and the thin wall maximizes access for tight spaces.
Read More »
Crescent™ Bolsters Product Offering by Adding Crescent APEX Power Tool Accessories to Family of Brands
APEX becomes sixth category-leading brand to be brought under the Crescent umbrella Sparks, Md.— Crescent™ Tools has been overhauled over the past two years, and that continues with the announcement that Apex Tool Group — one of the largest tool manufacturers in the world—is bringing the APEX® Industrial Fastening brand under the Crescent umbrella as Crescent APEX®. The transition will...
Read More »
New Storage Options Feature Four-way Skid Bolsters for Loading and Unloading
Crescent JOBOX Site-Vault™ series offers built-in lid storage, chamfered lid for high strength and shelf strength to carry up to 1,000 pounds. Crescent JOBOX Site Vault series Chests feature chamfered lid design that adds strength and eliminates sharp lid corners for security and improved safety. Grip-Rite lifting channel provides grip on the lid for safe opening and the gas spring helps...
Read More »
New Pipe Wrenches Available in 10, 12, 14, 16, 18 and 24 inch
K9 Angle-Access Jaws™ bite in an arc of 30 degrees. Aluminum options are more than 40% light than cast iron to reduce user fatigue. Steel self-adjusting pipe wrenches feature a ratcheting head for one-handed use.
Read More »
New Heated Apparel Keep Mechanics Warm and Focused
Features three heating zones such as left chest, right chest and mid-back. Includes rechargeable 5,200mAh battery which provides hours of consistent heat when fully charged. Jackets are water resistant, machine washable and dryer safe.
Read More »
New 90-tooth Ratchets with Solvent-resistant Cushion Grip
Provides 4-degree swing arc for access in tight spaces. Precision-engineered, high-strength pawl gives increased durability, helping the ratchets exceed ASME torque performance requirements. Full polish versions are simple to clean and ergonomic to hands.
Read More »New Mobile Work Tables with Large 3-inch Casters
Can be adjusted between 35 and 48 inches tall for more comfortable use, rather than the mechanic adjusting to the table. Support up to 150 pounds with its 18-gauge frame, 20-gauge top shelf and dividers and bolted dual legs. Flex foam tool storage system holds tool shapes and its low profile fits in most tool drawers (2 inches deep and up) and the 16"x22" dimensions can be segmented to fit...
Read More »
New Winglight and Compact Work Light Offer Ways to Get The Job Done in Low Light
Winglight is powerful flashlight with up to 400 lumens of lighting power. Opens to reveal a powerful LED on the inside of each win. Compact work light has 100-lumen penlight feature that provides clean spotlight option while the 300-lumen dimmable area light brightens broader area.
Read More »
SATA™ Tools Launch in U.S. — "Made to Challenge" Brand from Apex Tool Group Lets Auto Techs Up Their Tool Game
Quality, innovation and value: Mechanics can stock up, save time and win with SATA, now on Amazon Sparks, Md., — October 14, 2019 — Apex Tool Group, a leading global industrial hand and power tool manufacturer, is proud to launch a new performance brand for U.S. auto techs: SATA™ Tools, available exclusively on Amazon. "Today's new mechanics know quality and the latest technology when...
Read More »
New Bolt Biter Extraction Sockets Designed to Remove Weathered, Damaged or Rounded Fasteners
Available in 8-, 15- or 28-piece sets or individually. Can be used with impact gun, ratchet, wrench or pliers. Able to disengaged from damaged fasteners without hammering or destroying the fastener.
Read More »
New u-GUARD Non-marring Covered Tools Includes Bits, Bit Holders and Nutsetters
Allow the user to grab directly onto the drive tool while it spins freely inside the covers. Provides protection and control on the jobsite. Protects from scratching or damages and the thin wall maximizes access for tight spaces.
Read More »
Crescent™ Bolsters Product Offering by Adding Crescent APEX Power Tool Accessories to Family of Brands
APEX becomes sixth category-leading brand to be brought under the Crescent umbrella Sparks, Md.— Crescent™ Tools has been overhauled over the past two years, and that continues with the announcement that Apex Tool Group — one of the largest tool manufacturers in the world—is bringing the APEX® Industrial Fastening brand under the Crescent umbrella as Crescent APEX®. The transition will...
Read More »
New Storage Options Feature Four-way Skid Bolsters for Loading and Unloading
Crescent JOBOX Site-Vault™ series offers built-in lid storage, chamfered lid for high strength and shelf strength to carry up to 1,000 pounds. Crescent JOBOX Site Vault series Chests feature chamfered lid design that adds strength and eliminates sharp lid corners for security and improved safety. Grip-Rite lifting channel provides grip on the lid for safe opening and the gas spring helps...
Read More »
New Pipe Wrenches Available in 10, 12, 14, 16, 18 and 24 inch
K9 Angle-Access Jaws™ bite in an arc of 30 degrees. Aluminum options are more than 40% light than cast iron to reduce user fatigue. Steel self-adjusting pipe wrenches feature a ratcheting head for one-handed use.
Read More »GEARWRENCH® Honored with Pair of PTEN Innovation Awards at AAPEX Show 2019
Mobile Work Station, Bluetooth Speaker receive high praise for innovative features, functionality Sparks, Md., Nov. 5, 2019 /PRNewswire/ -- A pair of products from GEARWRENCH—a premium brand of mechanics hand tools within the Apex Tool Group—were recognized at the PTEN Innovation Awards (PTIA) during the Automotive Aftermarket Products Expo (AAPEX) Tuesday at the Sands Expo in Las Vegas....
Read More »
New Heated Apparel Keep Mechanics Warm and Focused
Features three heating zones such as left chest, right chest and mid-back. Includes rechargeable 5,200mAh battery which provides hours of consistent heat when fully charged. Jackets are water resistant, machine washable and dryer safe.
Read More »
New 90-tooth Ratchets with Solvent-resistant Cushion Grip
Provides 4-degree swing arc for access in tight spaces. Precision-engineered, high-strength pawl gives increased durability, helping the ratchets exceed ASME torque performance requirements. Full polish versions are simple to clean and ergonomic to hands.
Read More »New Mobile Work Tables with Large 3-inch Casters
Can be adjusted between 35 and 48 inches tall for more comfortable use, rather than the mechanic adjusting to the table. Support up to 150 pounds with its 18-gauge frame, 20-gauge top shelf and dividers and bolted dual legs. Flex foam tool storage system holds tool shapes and its low profile fits in most tool drawers (2 inches deep and up) and the 16"x22" dimensions can be segmented to fit...
Read More »
New Winglight and Compact Work Light Offer Ways to Get The Job Done in Low Light
Winglight is powerful flashlight with up to 400 lumens of lighting power. Opens to reveal a powerful LED on the inside of each win. Compact work light has 100-lumen penlight feature that provides clean spotlight option while the 300-lumen dimmable area light brightens broader area.
Read More »
SATA™ Tools Launch in U.S. — "Made to Challenge" Brand from Apex Tool Group Lets Auto Techs Up Their Tool Game
Quality, innovation and value: Mechanics can stock up, save time and win with SATA, now on Amazon Sparks, Md., — October 14, 2019 — Apex Tool Group, a leading global industrial hand and power tool manufacturer, is proud to launch a new performance brand for U.S. auto techs: SATA™ Tools, available exclusively on Amazon. "Today's new mechanics know quality and the latest technology when...
Read More »
