Elma Bustronic Corp.
Fremont, CA 94538
Share:
Test Backplane targets VPX board developers/integrators.
Designed to latest VITA 46 specifications, 2-slot VPX test backplane allows user to power up and test J1 fabric connections as they would be interconnected in target application. Unit accepts 6U cards, with 3U size supported by use of shelf divider, and offers slot pitch of 1.6 in. to simplify attachment of probes. Device's A channel input, using SMA cables, accepts up to 10 Gbps and B, C, and D...
Read More »
Compact Backplane is compliant with PICMG 3.0 specification.
Featuring 18-layer controlled-impedance stripline design, 6-slot AdvancedTCA Backplane in Mesh topology can also be used in Dual Star topology implementations. Compact backplane features standard MicroTCA connectors and fits within 5U horizontal ATCA enclosure, along with 2 shelf manager connectors within card cage. Connectors are also available for SHMC, power entry, Sense, I2C Bus, IPMB, Ring,...
Read More »
Load Board locates hot spots in enclosures.
By applying load to power supply for verification and creating heat to test chassis cooling, 3U VPX load board helps confirm chassis meets VITA 46/48 power specifications and helps locate hot spots within enclosure. Features include microcontroller-based stepped load control to 100 W maximum, power reset button, and IEEE injector/ejector handle that provides secure latching mechanism. Go-No-Go...
Read More »
Test Modules allow testing/pre-emphasis of SerDes signals.
Designed to plug into VPX backplanes, 16-channel version of SerDes test modules test VPX switch and node cards and/or backplane channels without requiring external equipment or special test fixtures. They allow pre-emphasis tuning of VPX cards, and measure initial performance of VPX boards and fine-tune them. Plugging directly into backplane/chassis, modules help in characterization of signals...
Read More »
Extender Boards feature rigid-flex-rigid PCB design.
Designed to provide access to both sides of test board, VXS Payload Extender Boards bring circuit card completely out of card cage or enclosure so that it can be tested or debugged. There are test points for all of lines on each 160-pin connector and MultiGig P0 connector. Offered 10-layer stripline design for rigid PCB and microstrip design for flex circuit portion, boards include ampmeter and...
Read More »
CompactPCI Backplane minimizes cabling.
Two-slot, 9U CompactPCI Backplane is horizontally mounted in chassis, with 3U devoted to power supply and header connectors. Unit features 8-layer controlled impedance stripline design and has virtually zero crosstalk. It is compliant to PICMG basic specification 2.0 R3.0 and PICMG Hot Swap specification 2.1 R1.0. Versions are also available that conform to PICMG 2.16 for Compact Packet Switching...
Read More »
Compact PCI Bridge Module plugs into rear of backplane.
Enabling expansion of 33 and 66 MHz systems across 2 or 3 backplanes, cPCI Backplane Bridge features automatic detection of 32/64 bit systems and support for 3.3 and 5 V input. Low profile, 64-bit, 8-layer bridge is available for 3U and 6U cPCI backplanes, enables 2-backplane configuration of 7 and 3-7 slots, and up to 21 slots with 3 backplanes. Modules provide JTAG boundary scan connections and...
Read More »
Elma Bustronic Releases RoHS-compliant CompactPCI Backplanes
FREMONT, California, Aug. 2, 2006 - Elma Bustronic Corporation, an industry leading designer and manufacturer of high performance backplanes now offers its CompactPCI backplanes in Restrictions of Hazardous Substances (RoHS)-compliant styles. The RoHS initiative requires that new electronic equipment can't be released to the European market after 07/01/2006 that contains more than 0.1% (1000 PPM)...
Read More »
MicroTCA Backplane has 14-slot design.
Featuring Single Star topology and 16-layer controlled-impedance stripline design, MicroTCA Backplane has modular architecture that supports redundant pods of AdvancedMC (AMC) modules. It provides 12 AMC slots, one power module slot, and one MicroTCA Controller Hub (MCH) slot in single width, full size format. Product allows single or redundant virtual carriers to provide power management,...
Read More »
Backplane meets cPSB PICMG 2.16 specifications.
Low-Profile PICMG 2.16 Compact Packet Switching Backplane is 9U long when horizontally mounted in chassis. Pluggable 47-pin power connectors are in extra 3U of length, allowing hot swapping of power supplies into same monolithic backplane. Backplane is available in Star, one fabric slot, and Dual Star, two fabric slot, versions.
Read More »
Test Backplane targets VPX board developers/integrators.
Designed to latest VITA 46 specifications, 2-slot VPX test backplane allows user to power up and test J1 fabric connections as they would be interconnected in target application. Unit accepts 6U cards, with 3U size supported by use of shelf divider, and offers slot pitch of 1.6 in. to simplify attachment of probes. Device's A channel input, using SMA cables, accepts up to 10 Gbps and B, C, and D...
Read More »
Compact Backplane is compliant with PICMG 3.0 specification.
Featuring 18-layer controlled-impedance stripline design, 6-slot AdvancedTCA Backplane in Mesh topology can also be used in Dual Star topology implementations. Compact backplane features standard MicroTCA connectors and fits within 5U horizontal ATCA enclosure, along with 2 shelf manager connectors within card cage. Connectors are also available for SHMC, power entry, Sense, I2C Bus, IPMB, Ring,...
Read More »
Load Board locates hot spots in enclosures.
By applying load to power supply for verification and creating heat to test chassis cooling, 3U VPX load board helps confirm chassis meets VITA 46/48 power specifications and helps locate hot spots within enclosure. Features include microcontroller-based stepped load control to 100 W maximum, power reset button, and IEEE injector/ejector handle that provides secure latching mechanism. Go-No-Go...
Read More »
Test Modules allow testing/pre-emphasis of SerDes signals.
Designed to plug into VPX backplanes, 16-channel version of SerDes test modules test VPX switch and node cards and/or backplane channels without requiring external equipment or special test fixtures. They allow pre-emphasis tuning of VPX cards, and measure initial performance of VPX boards and fine-tune them. Plugging directly into backplane/chassis, modules help in characterization of signals...
Read More »
Extender Boards feature rigid-flex-rigid PCB design.
Designed to provide access to both sides of test board, VXS Payload Extender Boards bring circuit card completely out of card cage or enclosure so that it can be tested or debugged. There are test points for all of lines on each 160-pin connector and MultiGig P0 connector. Offered 10-layer stripline design for rigid PCB and microstrip design for flex circuit portion, boards include ampmeter and...
Read More »
CompactPCI Backplane minimizes cabling.
Two-slot, 9U CompactPCI Backplane is horizontally mounted in chassis, with 3U devoted to power supply and header connectors. Unit features 8-layer controlled impedance stripline design and has virtually zero crosstalk. It is compliant to PICMG basic specification 2.0 R3.0 and PICMG Hot Swap specification 2.1 R1.0. Versions are also available that conform to PICMG 2.16 for Compact Packet Switching...
Read More »
Compact PCI Bridge Module plugs into rear of backplane.
Enabling expansion of 33 and 66 MHz systems across 2 or 3 backplanes, cPCI Backplane Bridge features automatic detection of 32/64 bit systems and support for 3.3 and 5 V input. Low profile, 64-bit, 8-layer bridge is available for 3U and 6U cPCI backplanes, enables 2-backplane configuration of 7 and 3-7 slots, and up to 21 slots with 3 backplanes. Modules provide JTAG boundary scan connections and...
Read More »
Elma Bustronic Releases RoHS-compliant CompactPCI Backplanes
FREMONT, California, Aug. 2, 2006 - Elma Bustronic Corporation, an industry leading designer and manufacturer of high performance backplanes now offers its CompactPCI backplanes in Restrictions of Hazardous Substances (RoHS)-compliant styles. The RoHS initiative requires that new electronic equipment can't be released to the European market after 07/01/2006 that contains more than 0.1% (1000 PPM)...
Read More »
MicroTCA Backplane has 14-slot design.
Featuring Single Star topology and 16-layer controlled-impedance stripline design, MicroTCA Backplane has modular architecture that supports redundant pods of AdvancedMC (AMC) modules. It provides 12 AMC slots, one power module slot, and one MicroTCA Controller Hub (MCH) slot in single width, full size format. Product allows single or redundant virtual carriers to provide power management,...
Read More »
Backplane meets cPSB PICMG 2.16 specifications.
Low-Profile PICMG 2.16 Compact Packet Switching Backplane is 9U long when horizontally mounted in chassis. Pluggable 47-pin power connectors are in extra 3U of length, allowing hot swapping of power supplies into same monolithic backplane. Backplane is available in Star, one fabric slot, and Dual Star, two fabric slot, versions.
Read More »