H2W Technologies
Santa Clarita, CA 91350
Linear Stepper Motor features 1 micron resolution.
Capable of 5 lb continuous force, 5 lb Linear Stepper travels at 80 ips, can operate in any axis, and features 1 G acceleration. Two-phase, single-axis motor is capable of precise position, velocity, and acceleration control when integrated with microstepping drive and indexer; resolutions are .010 in. for full step and .00004 in. for one microstep. While suited for open loop positioning...
Read More »
Linear Positioning Stages offer speeds up to 240 in./sec.
SR Linear Positioning Stages offer acceleration up to 12 G, zero cogging, resolution to 0.000004 in., repeatability to ±0.00004 in., and load capacity to 55 lb. Standard non-contact 3-phase brushless motors, commutated sinusoidally or trapezoidally, have continuous forces up to 165 lb and peak forces up to 550 lb. Available in travel lengths as long as 10 ft, compact, single-rail stages are...
Read More »
Moving Magnet Voice Coil Actuators feature zero cogging.
Moving magnet voice coil linear actuators, supplied with bearings and shaft, can have power-off magnetic brakes for one or both ends of stroke. Offered with strokes from 0.15-3.00 in., continuous force to 25.0 lb, and peak force to 75.0 lb, products offer acceleration up to 20g, resolution to 0.0001 in./ft, and repeatability to 0.0002 in. For closed-loop operation, actuators require linear...
Read More »
Linear Positioning Stages feature 0.1 micron resolution.
Mounted on any flat surface, XR(TM) crossed roller bearing, brushless linear servo motor stages offer smooth motion suitable for base or X axis in stacked multi-stage (X-Y) applications. Load capacity is 200 lb, velocity is 100 in./sec with acceleration up to 9 G. Construction also includes choice of iron core, non-cogging linear motor with sinusoidal/trapezoidal commutation or ironless core,...
Read More »
Linear Stepper Stages feature 1 micron resolution.
Capable of speeds to 118 ips and acceleration up to 5 G's, closed loop linear steppers with integral linear encoder feature repeatability to .0004 in./ft and accuracy to .001 in./ft. Stages are available in travel lengths to 144 in. and forces of 6, 10, and 20 lb. Cable carrier ensures cables protection and provides cycle 100,000,000 plus cycle counts.
Read More »
Limited Angle Torque Motors deliver ripple-free motion.
Available in standard and custom designs, Torquers are single-phase, brushless motors offered in kit and housed styles. MR series provides angular excursions to 180° and features toroidally wound iron core stator with 2-, 4-, or 6-pole permanent magnet rotors. Arc segmented, multi-pole permanent magnet stator motors in WR series have copper magnet wire rotor for excursions less than...
Read More »
Voice Coil Positioning Stages have 0.1 micron resolution.
With up to 2 in. of travel and no force or velocity ripple, voice coil stages suit precise motion control applications such as scanning, lens grinding, and laser and mirror positioning. Direct drive, zero backlash stages have no moving cables and are available with acceleration rates to 10 g, 0-50 lb continuous force, and 150 lb peak force. Closed loop products exhibit smooth motion and require...
Read More »
Linear Stage offer resolution to 1.0 micron.
Linear stages integrate splined linear guide and leadscrew, resulting in torsionally stiff stage that can be operated in horizontal or vertical axis. Built up to 8 ft long, products are designed for loads to 100 lb and speeds to 30 ips. Without requiring adjustment, lubrication, or maintenance, stages can be specified in compound multi-axis configurations. Variety of stepper motors, dc brush and...
Read More »
Belt Driven Linear Stages suit positioning applications.
Measuring 4.03 x 3.58 x stroke length plus 15 in. long, compact BL series linear position stages are available with travel lengths to 144 in. They move loads up to 200 lb at speeds from .001-200 in./sec with acceleration of 2G. Horizontally or vertically mountable, stages can supplied in multi-axis configurations with variety of motor/gearmotor options. Other options include fail-safe brake,...
Read More »
Limited-Angle Torque Motors offer smooth, precise operation.
Single-phase, non-commutated, rotary actuators (torquers) are available in various sizes and custom designs with continuous torque rating of 500 oz-in. and peak torque rating of 1500 oz-in. Kit style TMR-V series motors are suited for closed loop applications, while housed TMR-H motors include custom configured shaft that extends out of back for mounting encoder. Compact actuators offer...
Read More »