H2W Technologies

Linear Motor Positioning Gantry offers 2-axis motion control.
Communication Systems & Equipment

Linear Motor Positioning Gantry offers 2-axis motion control.

Featuring dual axis design, Model SRS-002-007/003-003-01-XY is suited for applications that require precise synchronized control of motion profiles. Each axis incorporates 1 micron resolution linear encoders for position feedback. Bottom axis has 1.75 in. stroke and generates 5.1 lb of force at 100% duty, while top axis has 2.75 in. stroke and generates 2.7 lb of force at 100% duty. Stages are...

Read More »
Linear Positioning Stage incorporates air bearings.
Communication Systems & Equipment

Linear Positioning Stage incorporates air bearings.

Incorporating- 5 magnetically preloaded air bearings for both load carrying and lateral guidance, Model ABS-012-12-030-X provides 12 in. stroke and generates continuous and peak force of 20 lb and 60 lb, respectively. Base of stage is constructed using lapped granite surface plate and lateral guidance is controlled by granite straight edge that is mounted to base. Non-contact 3-phase brushless...

Read More »
XZ Positioning Stage Gantry is driven by brushless linear motor.
Communication Systems & Equipment

XZ Positioning Stage Gantry is driven by brushless linear motor.

Respectively intended for high- and low- to medium-force applications, vertical axis dual rail stage (DRS) and horizontal axis single rail stage (SRS) are- closed loop positioning systems- driven by brushless linear motors- that are guided by recirculating linear ball bearing blocks and rails. Each axis incorporates 1 micron resolution linear encoders, and dual shock absorbing dampers protect...

Read More »
Voice Coil Actuator generates 135 lb peak force.
Mechanical Power Transmission

Voice Coil Actuator generates 135 lb peak force.

Suited for high-force motion control applications, Model NCM08-35-450-3LB can be operated under either open or closed loop position control, or force control. Moving magnet type linear actuator incorporates neodymium magnets in conjunction with precision layer wound winding. Precision ground hardened steel shaft, measuring 0.500 in. in diameter, is guided by 2 recirculating linear ball bushings....

Read More »
Voice Coil Positioning Stage fits within 1.6 in.³ volume.
Communication Systems & Equipment

Voice Coil Positioning Stage fits within 1.6 in.³ volume.

Able to be used for high-speed positioning and auto-focusing applications, miniature VCS02-001-CR-01-MC is driven by- NCC type actuator (NCC02-07-001-1R) and guided by- precision linear crossed roller bearing. This closed loop system, with 0.20 in.- stroke, generates 0.26 lb continuous force and 0.78 lb peak force. There are no moving cables, and 1 micron resolution magnetic linear encoder is...

Read More »
Voice Coil Positioning Stage offers dual mounting options.
Communication Systems & Equipment

Voice Coil Positioning Stage offers dual mounting options.

Driven by NCC type actuator and guided by precision linear recirculating bearings, Model VCS20-020-LB-12 features 2.0 in. stroke and generates 2 lb continuous/6- lb peak- force. With optional air cooling, stage can achieve higher continuous forces. Two mounting options allow unit to be oriented vertically with coil moving, or horizontally with magnet assembly moving. Equipped with 12 micron...

Read More »
Stepper Driver uses pure-sinusoidal current control technique.
Controls & Controllers

Stepper Driver uses pure-sinusoidal current control technique.

With automatic optimization speed control technique, Model SD-03-48-125 produces output that is stable with almost zero vibration and noise. Two-phase, bi-polar micro-stepping drive features supply voltage of 20–50 Vdc, selectable output current from 1.0~4.2 A peak, pulse input frequency up to 200 kHz, and selectable resolutions up to 25,000 steps. Suitable for 2-phase, 4-, 6-, and 8-lead step...

Read More »
Four-Axis Gantry has vacuum-compatible design.
Material Handling & Storage

Four-Axis Gantry has vacuum-compatible design.

Designed for secondary- silicon wafer processing while exposed to vacuum, 4-axis (XYθZ) positioning gantry features X and Y axes driven by brushless linear motor DR Positioning Stages. - While θ axis is worm gear stage driven by rotary stepper motor under closed loop control in conjunction with arc-segmented linear encoder, Z axis linear motion is achieved using- voice coil positioning stage...

Read More »
Voice Coil Positioning Stage features dual head design.
Communication Systems & Equipment

Voice Coil Positioning Stage features dual head design.

Capable of independent or synchronized 2-axis control, Model VCS15-050-LB-01-MC-2 is suited for high-end motion control applications. Each head that rides on common linear rail is driven by NCC moving coil type linear actuator, and is guided by 2 recirculating linear bearings. Each voice coil has 1.5 in. stroke and generates 8.4 lb of continuous force with 25.2 lb of peak force. For position...

Read More »
Positioning Stages provide Z-axis linear motion.
Communication Systems & Equipment

Positioning Stages provide Z-axis linear motion.

Driven by 3-phase brushless linear motor and guided by pair of precision recirculating linear ball bearings, SR Series features integrated closed loop servo theta stage for 2-axis linear/rotary motion control applications. Open-type positioning stages, providing 24 in. stroke, generate 100 lb of continuous force and 300 lb of peak force. Rotary axis is capable of full 360° rotation. Equipped...

Read More »

All Topics