Aerocomm Inc.
Lenexa, KS 66219
Share:
RF Module operates in 868 MHz European band.
Built to provide OEMs with license-free RF communications over distances up to 15 km, 868 MHz spread spectrum transceiver, Model AC4868 delivers up to 250 mW of output power and data rates up to 76,000 bps. RF232(TM) transparent protocol enables seamless cable-to-transceiver replacement and supports point-to-point, point-to-multipoint, or peer-to-peer communications. Dynamic serial firmware...
Read More »
Plug-and-Play RF Transceivers offer Ethernet connectivity.
ConnexNet transceivers merge RF protocol with Digi Connect ME-® embedded device server to facilitate networking. Units serve as conduit between user and multiple destination devices via local network or Internet connection. They operate at 900 MHz with up to 1 W of scalable output power offered in server/client or peer-to-peer protocols. Transceivers do not require Com port redirector and will...
Read More »
Transceivers offer intelligent addressing mechanism.
Mesh-ready AC4790 peer-to-peer transceivers employ dynamic addressing scheme to support independent communication between any 2 in-range transceivers in an RF network. Each transceiver node knows which other nodes are within talking distance, as well as signal strength, enabling OEMs to design routing sequences that optimize network. Utilizing FHHS technology and with 25 ms sync times, unit...
Read More »
RF Modems withstand harsh environmental conditions.
Housed in NEMA 4X enclosures, Models ACE6490 and ACE6790 deliver variable output power up to 1 W at 900 MHz. Model ACE6790 utilizes dynamic peer-to-peer protocol for enabling mesh topology, while Model ACE6490 employs server/client networking architecture. Both transceivers utilize FHSS technology and employ data-encryption standards. Typical applications include SCADA, industrial control,...
Read More »
One Watt Modems simplify long-range WLAN connectivity.
ConnexLink(TM) 900 MHz Transceivers can talk over distances of 20 miles line-of-sight. They can be set up in minutes for cable-free communication between industrial RS232/422/485 devices, providing data transmissions of up to 115.2 Kbps. Small, portable units are suited for mobile and temporary settings as well as for fixed installations. Any number of remote ConnexLinks may be set up in...
Read More »
Transceiver suits local-area industrial communications.
Model AC4490-1W provides 1 W output, allowing data transmissions of 115.2 Kbps across 20 mile line-of-sight. Unit utilizes RF232(TM) protocol to manage over-the-air concerns such as interference rejection, error detection, addressing, security, and link verification. Transceiver, with 1.65 x 1.9 in. footprint, is suitable as direct cable replacement requiring no special host software for...
Read More »
Protocol supports dynamic peer-to-peer networking.
MeshRF(TM) technology features networking architecture that allows wireless LAN system to forward traffic between transceiver nodes without need for master transceiver. Nodes and node groups can be added to or removed from existing networks, while self-healing and auto-routing features provide scalability and reliability. Random channeling enables multiple communication links, and FHSS technology...
Read More »
Transceiver suits small, wireless applications.
Using proprietary FHSS technology, miniature 900 MHz AC4490-1x1(TM) measures 1 in.Ã-² and enables engineers to design-in full wireless capability. All components are integrated into multi-chip module design. Transceiver includes proprietary RF232(TM) embedded protocol for plug-and-play installation and TTL serial interface that provides bi-directional communication. With up to 115.2 Kbps...
Read More »
Kits offer tools to design and test wireless applications.
Company's 900 MHz and 2.4 GHz Design Suites include all tools necessary to set up, test, and configure wireless applications before deploying them. Loop-back mode allows OEM to distance-test using one PC, while status LEDs indicate varying modes, ranges, and operations. Offering support for RS232, RS485, RS422 and USB connections, kits also include ConnexRF transceivers, adapter boards, power...
Read More »
Transceiver uses RF232(TM) transparent protocol.
AC4490 900 MHz spread spectrum transceiver interfaces via serial TTL level connection to provide transparent, bi-directional wireless communication in point-to-point and point-to-multipoint, client/server, or peer-to-peer networks. Using FHSS technology, module provides interference rejection, enables co-located system operation, and maintains data integrity. With data rate to 115.2 Kbps, it...
Read More »RF Module operates in 868 MHz European band.
Built to provide OEMs with license-free RF communications over distances up to 15 km, 868 MHz spread spectrum transceiver, Model AC4868 delivers up to 250 mW of output power and data rates up to 76,000 bps. RF232(TM) transparent protocol enables seamless cable-to-transceiver replacement and supports point-to-point, point-to-multipoint, or peer-to-peer communications. Dynamic serial firmware...
Read More »
Plug-and-Play RF Transceivers offer Ethernet connectivity.
ConnexNet transceivers merge RF protocol with Digi Connect ME-® embedded device server to facilitate networking. Units serve as conduit between user and multiple destination devices via local network or Internet connection. They operate at 900 MHz with up to 1 W of scalable output power offered in server/client or peer-to-peer protocols. Transceivers do not require Com port redirector and will...
Read More »
Transceivers offer intelligent addressing mechanism.
Mesh-ready AC4790 peer-to-peer transceivers employ dynamic addressing scheme to support independent communication between any 2 in-range transceivers in an RF network. Each transceiver node knows which other nodes are within talking distance, as well as signal strength, enabling OEMs to design routing sequences that optimize network. Utilizing FHHS technology and with 25 ms sync times, unit...
Read More »
RF Modems withstand harsh environmental conditions.
Housed in NEMA 4X enclosures, Models ACE6490 and ACE6790 deliver variable output power up to 1 W at 900 MHz. Model ACE6790 utilizes dynamic peer-to-peer protocol for enabling mesh topology, while Model ACE6490 employs server/client networking architecture. Both transceivers utilize FHSS technology and employ data-encryption standards. Typical applications include SCADA, industrial control,...
Read More »
One Watt Modems simplify long-range WLAN connectivity.
ConnexLink(TM) 900 MHz Transceivers can talk over distances of 20 miles line-of-sight. They can be set up in minutes for cable-free communication between industrial RS232/422/485 devices, providing data transmissions of up to 115.2 Kbps. Small, portable units are suited for mobile and temporary settings as well as for fixed installations. Any number of remote ConnexLinks may be set up in...
Read More »
Transceiver suits local-area industrial communications.
Model AC4490-1W provides 1 W output, allowing data transmissions of 115.2 Kbps across 20 mile line-of-sight. Unit utilizes RF232(TM) protocol to manage over-the-air concerns such as interference rejection, error detection, addressing, security, and link verification. Transceiver, with 1.65 x 1.9 in. footprint, is suitable as direct cable replacement requiring no special host software for...
Read More »
Protocol supports dynamic peer-to-peer networking.
MeshRF(TM) technology features networking architecture that allows wireless LAN system to forward traffic between transceiver nodes without need for master transceiver. Nodes and node groups can be added to or removed from existing networks, while self-healing and auto-routing features provide scalability and reliability. Random channeling enables multiple communication links, and FHSS technology...
Read More »
Transceiver suits small, wireless applications.
Using proprietary FHSS technology, miniature 900 MHz AC4490-1x1(TM) measures 1 in.Ã-² and enables engineers to design-in full wireless capability. All components are integrated into multi-chip module design. Transceiver includes proprietary RF232(TM) embedded protocol for plug-and-play installation and TTL serial interface that provides bi-directional communication. With up to 115.2 Kbps...
Read More »
Kits offer tools to design and test wireless applications.
Company's 900 MHz and 2.4 GHz Design Suites include all tools necessary to set up, test, and configure wireless applications before deploying them. Loop-back mode allows OEM to distance-test using one PC, while status LEDs indicate varying modes, ranges, and operations. Offering support for RS232, RS485, RS422 and USB connections, kits also include ConnexRF transceivers, adapter boards, power...
Read More »
Transceiver uses RF232(TM) transparent protocol.
AC4490 900 MHz spread spectrum transceiver interfaces via serial TTL level connection to provide transparent, bi-directional wireless communication in point-to-point and point-to-multipoint, client/server, or peer-to-peer networks. Using FHSS technology, module provides interference rejection, enables co-located system operation, and maintains data integrity. With data rate to 115.2 Kbps, it...
Read More »