B&K Precision Corporation

Power Supply offers two, front-mounted LED displays.
Electrical Equipment & Systems

Power Supply offers two, front-mounted LED displays.

Benchtop Model 1735A dual 4-digit display, single output digital dc power supply utilizes 115 Vac outlet as power source. It offers 10 mV and 1 mA resolution, single voltage output of 00.00 to 30.00 Vdc at output current of 0.000 to 3.000 A. Features include coarse and fine voltage controls, load and line regulation, and constant voltage/current operation. It continuously monitors voltage and...

Read More »
Accessory Kit supports function generator users.
Agricultural & Farming Products

Accessory Kit supports function generator users.

Model TLFG kit eliminates time consuming task of collecting cables and adapters just to get started. It has parts that are used every day, including: BNC (m) cable assemblies with RG-58C/U cable and molded bend relief boots; BNC (f) breakout with miniature alligator clips and 9 in. silicone wire; BNC (f) breakout with 0.031 sockets; MiniFlex IC clips; MicroClip IC clips; BNC (f-m-f) in-series...

Read More »
Pulse Generator uses standard 115 Vac power source.
Agricultural & Farming Products

Pulse Generator uses standard 115 Vac power source.

Model 4030 10 MHz pulse generator is capable of producing pulsed waveforms with variable symmetry and amplitude to test digital logic circuits, shift registers, and response time of opto-isolators. Manual mode allows one pulse to be generated each time pushbutton is pressed. External triggering mode allows pulse generator to be synchronized to external signal, such as external clock frequency...

Read More »
Digital DC Power Supply has adjustable limit controls.
Electrical Equipment & Systems

Digital DC Power Supply has adjustable limit controls.

Model 1761 utilizes 115 Vac outlet as its power source. Bench top unit provides accuracy of dual 4-digit LED resolution, 2 variable voltage outputs (00.00 Vac to 35.00 Vdc and 0.000 to 3.000 A), and one variable 2 to 6.5 Vdc, 5 A output. Front panel indicators and controls include Overload Indicator Light, Voltage Adjustment Knob, and current limit controls. Voltage meter resolution is 00.00 to...

Read More »
Power-Supply Accessory Kit is packaged in blister-pack case.
Construction Equipment and Supplies

Power-Supply Accessory Kit is packaged in blister-pack case.

Model TLPS provides fully insulated alligator clips, standard alligator clips, and spade lug adapters. Retractile, sheathed banana plug connects to power supply, and fixed, sheathed banana plug protect users. Kit includes ready-made, silicone-jacketed, test-lead set for power supplies with remote sensing capabilities. Items meet IEC61010-032 international safety specifications to 1,000 V.

Read More »
Device Programmer works in field without computer.
Electronic Components & Devices

Device Programmer works in field without computer.

Model 869 programs, tests, repairs, or re-programs any electronic device using memory IC either connected to computer, or in field without computer. Universal Stand Alone Device programmer has 4,322 device library, which supports PROMs, EPROMs, PLDs, and Microcontrollers. Test capabilities include IC test for TTL and CMOS Logic ICs and Device Insertion Tests. Windows-compatible software interface...

Read More »
Transistor Tester has front-panel mounted LEDs.
Test & Measurement

Transistor Tester has front-panel mounted LEDs.

Model 520C utilizes limited-energy pulse circuit to permit in-circuit and out-of-circuit transistor testing. Its 6-position TEST switch sequentially connects device under test in all possible configurations. Included meter identifies leakage in Silicon and Germanium devices. Audible momentary tone identifies positive test, and automatic polarity indication identifies NPN or PNP, N or P channel...

Read More »
Network Cable Testers are stand-alone units.

Network Cable Testers are stand-alone units.

Model 230A portable, battery-powered, multi-network cable tester detects miswiring, polarization, and continuity in seconds. It also tests ground of shielded twisted pair cables. Model 231A portable, battery-powered, deluxe multi-network cable tester can read correct pin configurations, and tests Point-to-Point on cables installed up to 1,000 ft away. It verifies cable continuity with LED's, and...

Read More »
LCR/ESR Meter tests components at up to 100KHz.
Test & Measurement

LCR/ESR Meter tests components at up to 100KHz.

Model 886 Synthesized In-Circuit LCR/ESR Meter is designed for component evaluation and fundamental impedance testing. Utilizing built-in test fixture, users can test lead components. Included SMD test probe allows users to conduct SMD component testing. Model 886 offers test conditions including 100Hz, 120Hz, 1KHz, 10KHz, 100KHz, 1Vrms, 0.25Vrms and 0.05Vrms. It features DC resistance...

Read More »
Capacitance Meter comes complete with test leads.
Test & Measurement

Capacitance Meter comes complete with test leads.

Battery-powered, portable hand-held Model 810C can be used for measuring most capacitive components. It has zero adjustment knob, front-panel 3-1/2 digit LED display, test lead jacks and direct plug-in test sockets. Range is 20 mf to 200 pf with accuracy of ± 0.5% of reading, + 0.5 pf. It weighs 10 oz and measures 5.7 x 3.0 x 1.6 in. Meter comes complete with 9V alkaline battery and user...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers