TSI Inc., Flowmeter Div.
Shoreview, MN 55126
Calibrators are suited for sampling pumps.
Model 4146, with range of 0.01-20 lpm, and Model 4046, with range from 2.5-300 lpm, are suited for low- and high-flow sampling pumps, respectively. Portable instruments provide continuous display of volumetric flow, allowing users to make calibration adjustments in real-time. Temperature compensated and pressure corrected, products offer volumetric flow accuracy within 2% of reading and can be...
Read More »
Combustion Test Kit facilitates oil-burner tuning.
Comprising combustion analyzer and smoke soot pump, Model 6120-OH CA-CALC provides accurate flue-gas data to tune burners on furnaces, boilers, and other oil heating appliances. Analyzer has user-selectable fuels and supplies CO2, O2, stack, and ambient temperatures. Kit provides real-time display of CO2 during burner adjustment and features electronic design that eliminates need for potentially...
Read More »Velocity Probe allows calculation of volumetric flowrate.
Air Velocity Probe Model 8592 lets users of Q-TRAK Plus IAQ Monitor measure air velocity at diffusers, in ductwork, and at fume hood faces. Velocity measurements are displayed in real-time along with temperature, humidity, CO, and CO2. Data can be stored and downloaded using TRAKPRO(TM) Data Analysis Software.
Read More »Respirator Fit Tester measures best fit for individual.
OSHA-accepted PORTACOUNTÃ-® N95 quantitatively measures how well N95 respirators fit. Software automates fit test, eliminating procedural errors, and stores results in database. PRESSURAÃ-® room controls, suited for airborne-isolation rooms, measure actual room pressure differential, warning health-care staff if it drops to unsafe levels. Controller versions modulate exhaust air volume to...
Read More »
Air Velocity Meters also measure humidity.
VELOCICALCÃ-® Models 8347 and 8347(A) measure humidity in addition to air velocity, temperature, and flowrate. Humidity is displayed as relative humidity, dewpoint, or wet bulb temperature. Model 8347(A) features articulated probe, compared to straight probe of Model 8347.
Read More »
Combustion Analyzer provides reduced set-up time.
Model CA-6203 tunes burners and low NOx systems for safe, efficient operation. Real-time flue gas data, including O2, CO, CO2, NO, NOx, temperature, draft pressure, excess air, and combustion efficiency, can be viewed, printed, or stored in memory. Able to be field-calibrated, unit's fuel parameters may be set by factory or user.
Read More »
Laser Gauge measures length and speed.
Noncontact Model LS200 LaserSpeedÃ-® measures with accuracy better than Ã-
Read More »
Combustion Analyzer suits various feuls.
Series CA-6100 CA-CALC provide real-time analysis of residential to light commercial gas/oil/wood heating systems and other combustion appliances to tune burners for optimum efficiency and safe operation.
Read More »
Calibrators are suited for sampling pumps.
Model 4146, with range of 0.01-20 lpm, and Model 4046, with range from 2.5-300 lpm, are suited for low- and high-flow sampling pumps, respectively. Portable instruments provide continuous display of volumetric flow, allowing users to make calibration adjustments in real-time. Temperature compensated and pressure corrected, products offer volumetric flow accuracy within 2% of reading and can be...
Read More »
Combustion Test Kit facilitates oil-burner tuning.
Comprising combustion analyzer and smoke soot pump, Model 6120-OH CA-CALC provides accurate flue-gas data to tune burners on furnaces, boilers, and other oil heating appliances. Analyzer has user-selectable fuels and supplies CO2, O2, stack, and ambient temperatures. Kit provides real-time display of CO2 during burner adjustment and features electronic design that eliminates need for potentially...
Read More »Velocity Probe allows calculation of volumetric flowrate.
Air Velocity Probe Model 8592 lets users of Q-TRAK Plus IAQ Monitor measure air velocity at diffusers, in ductwork, and at fume hood faces. Velocity measurements are displayed in real-time along with temperature, humidity, CO, and CO2. Data can be stored and downloaded using TRAKPRO(TM) Data Analysis Software.
Read More »Respirator Fit Tester measures best fit for individual.
OSHA-accepted PORTACOUNTÃ-® N95 quantitatively measures how well N95 respirators fit. Software automates fit test, eliminating procedural errors, and stores results in database. PRESSURAÃ-® room controls, suited for airborne-isolation rooms, measure actual room pressure differential, warning health-care staff if it drops to unsafe levels. Controller versions modulate exhaust air volume to...
Read More »
Air Velocity Meters also measure humidity.
VELOCICALCÃ-® Models 8347 and 8347(A) measure humidity in addition to air velocity, temperature, and flowrate. Humidity is displayed as relative humidity, dewpoint, or wet bulb temperature. Model 8347(A) features articulated probe, compared to straight probe of Model 8347.
Read More »
Combustion Analyzer provides reduced set-up time.
Model CA-6203 tunes burners and low NOx systems for safe, efficient operation. Real-time flue gas data, including O2, CO, CO2, NO, NOx, temperature, draft pressure, excess air, and combustion efficiency, can be viewed, printed, or stored in memory. Able to be field-calibrated, unit's fuel parameters may be set by factory or user.
Read More »
Laser Gauge measures length and speed.
Noncontact Model LS200 LaserSpeedÃ-® measures with accuracy better than Ã-
Read More »
Combustion Analyzer suits various feuls.
Series CA-6100 CA-CALC provide real-time analysis of residential to light commercial gas/oil/wood heating systems and other combustion appliances to tune burners for optimum efficiency and safe operation.
Read More »