MAXPRO Technologies, Inc.
Fairview, PA 16415
Gas Booster Systems Maintain High Purity Levels
Fairview, Pa - March 20, 2009 - Cutting edge research facilities are exploring ways to collect gases from sources near atmospheric pressure without contamination. The system shown here was built to collect argon gas and compress it to 4,300 psig. Additional applications may require 99.999% purity while compressing neon gas. To accomplish this Maxpro utilizes boosters with a flushed seal system....
Read More »
Pressure Cycle Test Skid
Fairview, PA - February 18, 2009 - This system is designed to support customers who require specific pressure test parameters that are beyond the capability of manually operated systems. This particular system was programmed to cycle between 1000 to 3000 psi for a predetermined number of cycles. Pressure Range: 0 to 5,000 psig Medium: Water or Oil Flow Range: 0 to 160 inÃ-³/minute Approximate...
Read More »
Hose Test Bench offers hydrostatic testing up to 10,000 psi.
Measuring 24 in. x 48 in. x 18.5 ft, Hose Test Bench is equipped with 3 Maximator air-driven liquid pumps for operation at 100-400, 400-3,000, and 2,000-10,000 psi. It includes circular chart recorder with 3 pressure ranges as well as safety devices to prevent operation in any unsafe condition. Stainless steel test chamber measures 24 in. x 16 in. x 14 ft and is equipped with 3 separate opening...
Read More »
Hose Testing To 60,000 PSI
Fairview, PA - October 2, 2006 - Maxpro Technologies custom designed a hose test bench for SPIR STAR, Ltd. Houston, Texas. The hydrostatic test system is designed for testing hoses from 4,500 up to 60,000 PSI The unit is equipped with two Maximator air driven liquid pumps. One for operation from 4,500 to 30,000 PSI and the second from 30,000 to 60,000 PSI. The system is operated from a TOUCH...
Read More »
Booster Systems suit aircraft ground support applications.
Available in 1- and 2-stage models, portable nitrogen booster systems include automatic stop feature (activated when gas supply pressure drops to minimum inlet rating). Turnkey systems can be operated by one person. Designed to operate from one gas source, regulator with gauge operates boosters' drive sections at pressures to 145 psi. Single stage models are for use in nitrogen charging to 3,000...
Read More »
Oxygen Booster suits ground support applications.
Lubrication-free Oxygen Booster System has automatic controls for unattended operation and may be set for pre-selected outlet pressure to 5,000 psi. No electrical connection is required. Oxygen chamber is sealed and vented for hydrocarbon-free operation. Booster features high-pressure safety relief, isolation and vent valves, and stainless steel tubing and fittings.
Read More »
Air Booster Systems feature automatic controls.
Mini breathing air booster systems produce output pressures to 4,500 psi and are suitable for applications that utilize multi-stage mechanical compressor with purification and storage cylinders. They are oil-free and require no lubrication. Max systems are designed for fire departments that utilize pure air in 2,200 psi cylinders. Select systems allow pump-down of supply cylinder to 150 psi, as...
Read More »
Air Pilot Switches can be used for N/O or N/C operation.
MAXIMATORÃ-® adjustable air pilot switches control pneumatic signal to air pilot lines, and can be used as on/off devices for air operated actuators, pilot operated valves, air driven pumps, amplifiers, and gas boosters. They are available in pressures from 145 to 14,500 psi, and offer aluminum alloy bodies, 440-B piston, T46 Turcon seal, and Buna-N O-ring. Connections include 1/4 in. FNPT...
Read More »
Relief Valves are designed for gas or liquid applications.
High pressure relief valves protect systems or devices from over-pressure damage and failure. They are available in pressures from 1,000 to 10,000 psi, and feature stainless steel body, nylon seat and PTFE/EPDM seals. Inlet or thru ports and outlet/vent sizes are 1/4 in. FNPT. Valves have 0.70 in. dia orifice and Cv of 0.12. They are externally adjustable and can be mounted in line.
Read More »Fairview, PA, April 11, 2022 -- Maxpro Technologies Inc. is Pleased to Announce The Acquisition of Maximator Test, LLC, Located in Gurnee, IL.
Fairview, PA, April 11, 2022 -- Maxpro Technologies Inc. is pleased to announce the acquisition of Maximator Test, LLC, located in Gurnee, IL. Maximator Test offers a full range of high-pressure testing services, including leak, impulse, and proof testing with pressures to 65,000 psi and burst testing with pressures to 145,000 psi (10,000 bar). Maximator Test also offers autofrettage services to...
Read More »Fairview PA â October 9, 2019 - Maxpro Technologies Breaks Ground on a New 5,900 Ft2 Expansion
Maxpro Technologies, located at 7728 Klier Drive South, Fairview, PA broke ground today on a nearly 6,000 square foot addition to its office, shop, and warehouse space. This is the fourth expansion to the building since it opened in 2002, and when completed, the facility will house a total of 21,940 square feet. Founded in December 1995 by Paul Bowser, Maxpro Technologies, began with three...
Read More »Maxpro Technologies Promotes Bradley Komaromy to Vice President of Operations
April 2019 – Fairview, PA - Maxpro Technologies is pleased to announce the promotion of Bradley Komaromy to Vice President of Operations. His new position will provide support and supervision to the areas of inventory, administration, and manufacturing at Maxpro’s Fairview, PA location. Brad is a 2004 graduate from the University of Pittsburgh, with a Bachelor of Science degree in Industrial...
Read More »Maxpro Technologies Announces the Appointment of Precision Hydraulic Technologies
Fairview, PA – October 22, 2018 – Maxpro Technologies announces the appointment of Precision Hydraulic Technologies, as the new West Texas (Permian Basin) distributor for Maxpro Technologies lines of Maximator® high pressure valves, fittings, tubing, liquid pumps, gas boosters and air amplifiers as well as Maxpro Packaged Systems. Precision Hydraulic has locations in Odessa, Midland and San...
Read More »Gas Booster Systems Maintain High Purity Levels
Fairview, Pa - March 20, 2009 - Cutting edge research facilities are exploring ways to collect gases from sources near atmospheric pressure without contamination. The system shown here was built to collect argon gas and compress it to 4,300 psig. Additional applications may require 99.999% purity while compressing neon gas. To accomplish this Maxpro utilizes boosters with a flushed seal system....
Read More »
Pressure Cycle Test Skid
Fairview, PA - February 18, 2009 - This system is designed to support customers who require specific pressure test parameters that are beyond the capability of manually operated systems. This particular system was programmed to cycle between 1000 to 3000 psi for a predetermined number of cycles. Pressure Range: 0 to 5,000 psig Medium: Water or Oil Flow Range: 0 to 160 inÃ-³/minute Approximate...
Read More »High Pressure Product Guide Now Available
Fairview, PA - February 4, 2009 - Maxpro Technologies announces the release of a new brochure outlining all of their high pressure products. The 4 page flyer reviews the valve and fitting line, liquid pumps, air amplifiers, gas boosters and packaged power systems, including photos, product capabilities, and most importantly, the most common applications and uses for the products. The piece is...
Read More »MAXPRO-® Technologies Appoints Mark Maloney National Field Sales Manager
Fairview, PA - January 9, 2009 - Maxpro Technologies announces the appointment of Mark P. Maloney as National Field Sales Manager. Maloney will work closely with Maxpro's current distributors in North America, as well as expand market coverage with the appointment of additional distributors. Maxpro Technologies is the North American distributor of Maximator products including high pressure valves...
Read More »Updated Maxpro Air Amplifier Catalog Available
Fairview, PA - July 16, 2008 - Maxpro Technologies announces the release of their updated Air Amplifier Catalog. This 12 page catalog outlines the features of the air amplifiers as well as the many turn-key systems available to provide a variety of air pressure solutions such as: Boost insufficient shop air supply Drive pneumatic cylinders High pressure air cleaning of weld areas ...
Read More »New Air Driven Liquid Pumps Featured In Updated Catalog
Fairview, PA - April 17, 2008 - Maxpro Technologies announces the release of a new 24 page catalog which details the company's complete line of Liquid Pumps and Packaged Power Systems. This catalog features a new LC pump series from Maximator. The LC pumps are small, sturdy units that have the option for a field replaceable hand lever. Maxpro's custom designed line of Power Packs, Pump Skids,...
Read More »