Berry Global, Inc.
Easthampton, MA 01027
Tape removes cleanly with no residue.
Suited for building trade, PolykenÃ-® Stucco 888 Enhanced Masking Material remains attached on jobsite for periods up to 30 days in temperatures to 150Ã-
Read More »
Wire Harness Tape reduces squeaks and resists abrasion.
Tyco PolykenÃ-® 007 consists of non-woven polyester backing on black natural rubber adhesive that is single-coated, self-wound, and provides consistent unwind throughout roll. Conformable and abrasion-resistant product, non-corrosive to copper wire, measures 11 mil thick and Ã-¾ in. wide and has 20 lb/in. tensile strength. Applications include spot taping, clip retention, or continuous...
Read More »
Wire Harness Tapes meet automotive requirements.
PolykenÃ-® pressure-sensitive tapes are available as various engine compartment tapes including heat shielding aluminum foil/fiberglass fabric composites, and flame-retardant polymeric and fabric composite tapes. Tapes resist chemicals, provide up to 60 oz/in. adhesion, and operate at up to 230Ã-
Read More »
Tapes are formulated to meet custom requirements.
Custom engineered tapes include acrylic, rubber, polyurethane, and silicone adhesives; heat-laminable films; flame-retardant synthetic and butyl rubbers; and various backing materials made into single-, double-, or custom-coated products and transfer films. Featuring heat-, moisture-, UV-resistance, and permanent adhesion or residue-free release, tapes can be developed to bond with dissimilar...
Read More »
Adhesive Tape is double coated with silicone and acrylic.
Suited for converters and OEMs, Type 3281A has silicone pressure-sensitive adhesive (PSA) on air-side of 0.5 mil clear polyester film carrier and acrylic PSA on liner side. With paper liner and differential release coating, product allows bonding of silicone materials to non-silicone substrates. Tape can be die-cut, and liner stays in place during lamination and conversion. Product can be used at...
Read More »
Adhesive Tapes offer solvent-based systems.
Custom engineered specialty adhesive tapes can be manufactured by applying solvent-based adhesive systems to various rigid and extensible films and laminates such as aluminum foil, LLDPE, LDPE or MDPE, PVC, polyester, and polyurethane. Tapes are acrylic-, polyurethane-, rubber-, and silicone-based and can be applied to foils and films up to 60 in. wide. Release liners can be matched to...
Read More »
Tape removes cleanly with no residue.
Suited for building trade, PolykenÃ-® Stucco 888 Enhanced Masking Material remains attached on jobsite for periods up to 30 days in temperatures to 150Ã-
Read More »
Wire Harness Tape reduces squeaks and resists abrasion.
Tyco PolykenÃ-® 007 consists of non-woven polyester backing on black natural rubber adhesive that is single-coated, self-wound, and provides consistent unwind throughout roll. Conformable and abrasion-resistant product, non-corrosive to copper wire, measures 11 mil thick and Ã-¾ in. wide and has 20 lb/in. tensile strength. Applications include spot taping, clip retention, or continuous...
Read More »
Wire Harness Tapes meet automotive requirements.
PolykenÃ-® pressure-sensitive tapes are available as various engine compartment tapes including heat shielding aluminum foil/fiberglass fabric composites, and flame-retardant polymeric and fabric composite tapes. Tapes resist chemicals, provide up to 60 oz/in. adhesion, and operate at up to 230Ã-
Read More »
Tapes are formulated to meet custom requirements.
Custom engineered tapes include acrylic, rubber, polyurethane, and silicone adhesives; heat-laminable films; flame-retardant synthetic and butyl rubbers; and various backing materials made into single-, double-, or custom-coated products and transfer films. Featuring heat-, moisture-, UV-resistance, and permanent adhesion or residue-free release, tapes can be developed to bond with dissimilar...
Read More »
Adhesive Tape is double coated with silicone and acrylic.
Suited for converters and OEMs, Type 3281A has silicone pressure-sensitive adhesive (PSA) on air-side of 0.5 mil clear polyester film carrier and acrylic PSA on liner side. With paper liner and differential release coating, product allows bonding of silicone materials to non-silicone substrates. Tape can be die-cut, and liner stays in place during lamination and conversion. Product can be used at...
Read More »
Adhesive Tapes offer solvent-based systems.
Custom engineered specialty adhesive tapes can be manufactured by applying solvent-based adhesive systems to various rigid and extensible films and laminates such as aluminum foil, LLDPE, LDPE or MDPE, PVC, polyester, and polyurethane. Tapes are acrylic-, polyurethane-, rubber-, and silicone-based and can be applied to foils and films up to 60 in. wide. Release liners can be matched to...
Read More »