Hobart Brothers, an ITW Company

Welding Wire has tensile strength between 70,000-95,000 psi.
Welding Equipment & Supplies

Welding Wire has tensile strength between 70,000-95,000 psi.

Designed as general fabrication welding wire for mild or low alloy steels, FabCO® Hornet gas-shielded flux-cored welding wire can be used in all positions with either 100% CO2 or 75% Ar/25% CO2 shielding gas mixture. Available in 0.045, 0.052 and 1/16 in. dia, unit produces flat bead profile and suits both single- and multi-pass applications. It has typical impact strength of 75 ft-lb at...

Read More »
Metal-Cored Wire improves weld quality on HSLA steels.
Welding Equipment & Supplies

Metal-Cored Wire improves weld quality on HSLA steels.

Designed for welding high-strength, low-alloy (HSLA) steels such as A514 (T-1), HY-80, and HY-100, Tri-Mark® Metalloy® 110 gas-shielded metal-cored wire offers tensile strength up to 128,000 psi and yield strengths up to 115,700 psi. It meets requirements of AWS classification E110C-K4 and creates welds virtually free of spatter and silicon islands. Properties include optimized...

Read More »
Stick Electrodes simplify welding during boiler tube repair.
Welding Equipment & Supplies

Stick Electrodes simplify welding during boiler tube repair.

Hobart® Boilermaker(TM) low-alloy stick electrodes E7018-1, E7018-A1, E8018-B2, and E9018-B3 feature low spatter levels and removable slag to minimize post-weld cleaning and rework. They operate from 75-90 A and can be used to weld on thin- and heavy-walled boiler tubes without burn-through. Units accommodate variety of welding styles. They are available in 3/32 and 1/8 in. dia models in...

Read More »
Self-Shielded Flux-Cored Wire reduces required rework.
Welding Equipment & Supplies

Self-Shielded Flux-Cored Wire reduces required rework.

Suited for use in field repairs, structural steel erection, construction, and ship fabrication, Fabshield XLR-8(TM) is formulated with diffusible hydrogen levels below 6.7 ml per 100g of weld deposit to ensure X-ray quality welds with optimal crack resistance. It has D designator under AWS A5.20:2005, making it usable for strict AWS D1.8 Demand Critical welds, and offers stable arc as well as...

Read More »
Aluminum Welding Wires meet AWS Specification A5.10.
Electrical Equipment & Systems

Aluminum Welding Wires meet AWS Specification A5.10.

Suitable for welding on heat exchangers, food manufacturing equipment, and transportation equipment, Smootharc(TM) 5356 consists of magnesium-based alloy that resists hot cracking, while Smootharc(TM) 4043 features higher level of silicon for optimal wetting action, and also resists weld cracking. Both wires are available in .030, .035, and 3/64 in. diameters on 1 lb spools or 12 and 16 lb reels....

Read More »
Metal-Cored Wires suit low alloy steel welding applications.
Welding Equipment & Supplies

Metal-Cored Wires suit low alloy steel welding applications.

Available in .045-.052 in. diameters, Tri-Mark® Metalloy® Vantage(TM) D2 is suited for single pass fillet welds, and produces weld toe lines almost completely free of silicon deposits. Tri-Mark Metalloy 80D2, offered in .045, .052, and 1/16 in. diameters, is suited for multi-pass welding and can be used on multiple types of weld joints and materials. When used with higher content...

Read More »
Stick Electrode offers 70,000 psi minimum tensile strength.
Welding Equipment & Supplies

Stick Electrode offers 70,000 psi minimum tensile strength.

Available in 1/8, 5/32, 3/16, 7/32, and Â-¼ in. dia, Rocket 7024 stick electrode features self-removing slag system that completely releases slag. Electrode is designed for DCEN, AC, or DCEP welding, and also suits general plate, tank and construction equipment fabrication, and SMAW applications. Offering smooth arc and low spatter levels, product meets AWS E7024 requirements for horizontal...

Read More »
Flux-Cored Welding Wire targets X80 pipeline applications.
Welding Equipment & Supplies

Flux-Cored Welding Wire targets X80 pipeline applications.

Classified under AWS A5.29, class E81T8-Ni2 J, self-shielded Hobart® Fabshield X80 provides tensile strength of 94,000 psi, yield strength of 84,000 psi, and CVN impact values from 107 lb/ft at -20°F to 96 lb/ft at -40°F. Wire is available in 5/64 in. diameter and features fast-freezing slag that is nearly self-peeling, making it suited for welding in all positions. Product can...

Read More »
Welding Equipment & Supplies

Flux-Cored Wire can be used to weld multiple materials.

Able to be used in all welding positions, self-shielded Fabshield® 23 suits general-purpose welding fabrication and repairs on thin gauge mild or galvanized steel and coated materials. It requires no shielding gas, enabling use outdoors or in drafty conditions, and produces minimal spatter to help minimize post-weld cleanup. Suitable for single-pass welding applications, wire is offered in...

Read More »
Welding Equipment & Supplies

Hard Surfacing Wires resist impact and abrasion.

Available for buildup or overlay, VertiWear® 600 and VertiWear® AP wires help increase parts life, prevent excessive equipment wear, and reduce need for maintaining extra parts inventory. VertiWear 600 wires deposit multi-purpose martensitic steel alloy, and VertiWear AP wires are suited for build-up or overlay on austenitic manganese or carbon steel as well as joining austenitic...

Read More »

All Topics