Kycon Inc.
Morgan Hill, CA 95037
Cable Assemblies suit computer and server applications.
Series KMC-SATA supports SATA Generation I and II platforms for 150 MB/sec and 300 MB/sec operation, respectively. Assemblies are made with lead-free signal cables and two 7-pin, straight-to-straight or right-angle-to-straight connectors. Standard lengths include 300, 500, and 1,000 mm. Custom cable assemblies are available.
Read More »
Multi-Port Modular Jacks have integrated LED indication.
Available in 2, 4, and 8 port versions, side entry jacks feature integrated LEDs located at top of connector for inspection of system activity. Multi-port RJ45, category 5, right angle connector with LEDs is fully shielded with grounding top and side tabs for panel grounding and EMI/RFI protection. Products are suited for telecommunications, security systems, networking systems, and multi-media...
Read More »
Connector saves space in IEEE 1394 applications.
Model KMFS-SMT-130 features low-profile design that lowers height of connector above surface of printed circuit board, allowing board to be mounted in thinner chassis or closer to other components. Space saving is over 50% compared to both through-hole-mount and surface-mount technologies. Available with gold contact plating, connector is suited for set-top boxes, PDAs, computer laptop and...
Read More »
USB Connector maintains low profile design.
Single-port KUSBL-SMT enables space savings of up to 64% using surface mount technology, while stacked KUSBL provides 31% space savings using through hole design. Both models are fully compliant with USB 2.0 and are available in standard gold flash or 30 Ã-µin. gold contact plating. KUSBL-SMT models are also available in tape and reel.
Read More »
Modular Jacks indicate transmit/receive and line status.
Right Angle RJ-45 Jack, with LED indicators, is fully shielded and has top and side grounding tabs for conductivity, panel grounding, and EMI/RFI protection. Snap-in board retention tabs provide additional stability after soldering. PCB-mount RJ45 is black Nylon 46, high-temp thermoplastic for wave and reflow soldering compatibility. Contact material is nickel-plated phosphor bronze with...
Read More »
USB Connectors are USB-IF certified.
Suited for use in high-speed interface connections between computers and peripherals, connectors are USB 2.0 compliant and support data throughputs of up to 480 Mbps. Both A-type and B-type connectors, available as fully or partially shielded, offer indentations for grounding and mating retention. Insulator material is available in black or white thermoplastic, and contact area comes in gold...
Read More »
IEEE 1394 Serial Bus Connector is fully shielded.
Model KFWS-SMTBS right angle, surface mount Serial Bus connector has back shield to prevent problems associated with EMI/RFI transmissions. Body is available in black or white PA6T thermoplastic. Unit aids data transfer from personal computers to computer peripherals and digital consumer audio/video equipment. KFWS-SMTBS is rated to 400 Mbps, has tin/nickel plated solder tails, and gold plating...
Read More »
Connector suits audio and video multimedia applications.
Combination Connector consists of 3 RCA phono jacks in red, white, and yellow color combination and 1 S-video connector in black. Main housing and colored washers are made from ABS thermoplastic, and contacts are made from brass and steel. Connector is available in PCB mount, and in vertical and horizontal configurations.
Read More »
Mini-DIN Connectors suit audio, video, and computer markets.
With bodies made from PBT thermoplastic and shields of tin plated steel, KMDR-series connectors are suitable for portable computers where board space and panel size are at premium. Contacts are gold plated with tin/lead on termination. Standard pin layout is available in 4 and 6 contact counts (GEO-port in 7 and 9 contact counts).
Read More »
USB Plug is used in dongles and adapters.
Surface-mount A-type USB 4-pin plug is available with 0.90 mm or 1.35 mm plastic posts. Insulator material is black or white PA6T high temperature thermoplastic. Plug has through-hole shield tabs and contacts made from phosphor bronze with gold flash over nickel. It is suitable for use in flash memory devices, USB hard drives, and hardware/software keys.
Read More »
Cable Assemblies suit computer and server applications.
Series KMC-SATA supports SATA Generation I and II platforms for 150 MB/sec and 300 MB/sec operation, respectively. Assemblies are made with lead-free signal cables and two 7-pin, straight-to-straight or right-angle-to-straight connectors. Standard lengths include 300, 500, and 1,000 mm. Custom cable assemblies are available.
Read More »
Multi-Port Modular Jacks have integrated LED indication.
Available in 2, 4, and 8 port versions, side entry jacks feature integrated LEDs located at top of connector for inspection of system activity. Multi-port RJ45, category 5, right angle connector with LEDs is fully shielded with grounding top and side tabs for panel grounding and EMI/RFI protection. Products are suited for telecommunications, security systems, networking systems, and multi-media...
Read More »
Connector saves space in IEEE 1394 applications.
Model KMFS-SMT-130 features low-profile design that lowers height of connector above surface of printed circuit board, allowing board to be mounted in thinner chassis or closer to other components. Space saving is over 50% compared to both through-hole-mount and surface-mount technologies. Available with gold contact plating, connector is suited for set-top boxes, PDAs, computer laptop and...
Read More »
USB Connector maintains low profile design.
Single-port KUSBL-SMT enables space savings of up to 64% using surface mount technology, while stacked KUSBL provides 31% space savings using through hole design. Both models are fully compliant with USB 2.0 and are available in standard gold flash or 30 Ã-µin. gold contact plating. KUSBL-SMT models are also available in tape and reel.
Read More »
Modular Jacks indicate transmit/receive and line status.
Right Angle RJ-45 Jack, with LED indicators, is fully shielded and has top and side grounding tabs for conductivity, panel grounding, and EMI/RFI protection. Snap-in board retention tabs provide additional stability after soldering. PCB-mount RJ45 is black Nylon 46, high-temp thermoplastic for wave and reflow soldering compatibility. Contact material is nickel-plated phosphor bronze with...
Read More »
USB Connectors are USB-IF certified.
Suited for use in high-speed interface connections between computers and peripherals, connectors are USB 2.0 compliant and support data throughputs of up to 480 Mbps. Both A-type and B-type connectors, available as fully or partially shielded, offer indentations for grounding and mating retention. Insulator material is available in black or white thermoplastic, and contact area comes in gold...
Read More »
IEEE 1394 Serial Bus Connector is fully shielded.
Model KFWS-SMTBS right angle, surface mount Serial Bus connector has back shield to prevent problems associated with EMI/RFI transmissions. Body is available in black or white PA6T thermoplastic. Unit aids data transfer from personal computers to computer peripherals and digital consumer audio/video equipment. KFWS-SMTBS is rated to 400 Mbps, has tin/nickel plated solder tails, and gold plating...
Read More »
Connector suits audio and video multimedia applications.
Combination Connector consists of 3 RCA phono jacks in red, white, and yellow color combination and 1 S-video connector in black. Main housing and colored washers are made from ABS thermoplastic, and contacts are made from brass and steel. Connector is available in PCB mount, and in vertical and horizontal configurations.
Read More »
Mini-DIN Connectors suit audio, video, and computer markets.
With bodies made from PBT thermoplastic and shields of tin plated steel, KMDR-series connectors are suitable for portable computers where board space and panel size are at premium. Contacts are gold plated with tin/lead on termination. Standard pin layout is available in 4 and 6 contact counts (GEO-port in 7 and 9 contact counts).
Read More »
USB Plug is used in dongles and adapters.
Surface-mount A-type USB 4-pin plug is available with 0.90 mm or 1.35 mm plastic posts. Insulator material is black or white PA6T high temperature thermoplastic. Plug has through-hole shield tabs and contacts made from phosphor bronze with gold flash over nickel. It is suitable for use in flash memory devices, USB hard drives, and hardware/software keys.
Read More »