Pasternack Enterprises

Electromechanical Switches feature D-SUB multi-pin connector interface.
Electrical Equipment & Systems

Electromechanical Switches feature D-SUB multi-pin connector interface.

Pasternack’s Electromechanical Switches are available in SPDT, SP3T, SP4T and SP6T configurations in both +12V and +28V designs. Units offer 0.15 dB insertion loss, 90 dB isolation levels and are rated to 600 W power capability. Switches feature an operating temperature of -20°C to +70°C and are compliant to RoHS and REACH standards. Units are suitable for military communications, commercial...

Read More »
Gunn Diode Oscillators feature self-locking tuning screws.
Electronic Components & Devices

Gunn Diode Oscillators feature self-locking tuning screws.

Gunn Diode Oscillators are available in PEWGN1001 (K-band) and PEWGN1000 (Ka-band) models. Units offer a phase noise as low as -98 dBc/Hz typical at 100 KHz offset and a frequency stability as low as -0.2 MHz/°C maximum. PEWGN1001 and PEWGN1000 generate center frequency of 24.125 GHz and 35 GHz respectively. Oscillators are operated in -40°C to +85°C temperature range with +5 to +5.5 Vdc bias...

Read More »
Quick Connect Attenuators meet IP67 ingress protection standards.
Electronic Components & Devices

Quick Connect Attenuators meet IP67 ingress protection standards.

Quick Connect Attenuators are offered with QMA, QN or 4.3-10 connectors. Units are suitable for DAS systems, remote radio heads (RRHs), base stations and antennas in telecommunication, industrial, defense and aerospace industries. QMA and QN models are made of brass tri-metal whereas 4.3-10 with anodized aluminum and are operated in DC to 6 GHz frequency range. Units provide attenuation from 0 to...

Read More »
Phase Locked Oscillators feature TTL lock detect output.
Electronic Components & Devices

Phase Locked Oscillators feature TTL lock detect output.

Pasternack’s Phase Locked Oscillators are offered in 50, 100, 500, 1000, 2000, 4000 and 6000 MHz frequencies. Used as phase locked loops, frequency synthesizers, function generators and local oscillator, units are compliant to RoHS standards. Operated in -30°C to +70°C temperature range with single positive DC voltage supply, oscillators offer a phase noise of -105 dBc/Hz at 10 KHz offset and...

Read More »
Electromechanical Switches feature latching actuators.
Electrical Equipment & Systems

Electromechanical Switches feature latching actuators.

Electromechanical Switches are available single-pole double-throw, single-pole four-throw and single-pole six-throw configurations. Units feature indicators, self-cut-off, TTL and 50 Ohm terminations and are suitable for electronic countermeasures, microwave radio and VSWT applications. Products offer low insertion loss repeatability of 0.03 to 0.05 dB and input power ratings of 70 watts CW....

Read More »
Waveguide to Coax Adapters offer a VSWR as low as 1.15:1.
Electrical Equipment & Systems

Waveguide to Coax Adapters offer a VSWR as low as 1.15:1.

Suitable for applications instrumentation, test benches, high efficiency RF/Microwave transmission, SATCOM, and MILCOM, Waveguide to Coax Adapters are offered in sizes from WR-10 to WR-430 and with aluminum, gold-plated aluminum or painted copper alloy finishing. These units cover a frequency range from 1.7GHz to 110GHz waveguide bands, units are available with UG (square/round cover), CMR, CPR...

Read More »
Relay Controlled Programmable Attenuators are RoHS compliant.
Electronic Components & Devices

Relay Controlled Programmable Attenuators are RoHS compliant.

Programmable Attenuators are available in six models with frequency bands from DC to 2000 MHz and attenuation levels ranging from 0 to 127 dB. Units are operated in a temperature range of -20°C to +85°C and come with female SMA or F-type connectors. Offering low insertion loss ranging from 0.8 to 3.5 dB, attenuation accuracy of ± 0.5 dB and input power up to 1-watt CW, products are housed in...

Read More »
SPP-250-LLPL Cable Assemblies feature maximum PIM level of -155 dBc.
Electrical Equipment & Systems

SPP-250-LLPL Cable Assemblies feature maximum PIM level of -155 dBc.

UL910 Plenum-Rated SPP-250-LLPL Cable Assemblies are available with 4.3-10, 7/16 DIN, N and 4.1-9.5 mini-DIN connector combinations and are suitable for distributed antenna systems (DAS), indoor wireless systems, multi-carrier communication systems and PIM testing. Offering a VSWR of 1.25:1 up to 2 GHz and 1.35:1 up to 6 GHz, units are operated in -55°C to +125°C temperature range. These units...

Read More »
RF Analyzer Cable Assemblies feature crush resistance of 1200 psi.
Electrical Equipment & Systems

RF Analyzer Cable Assemblies feature crush resistance of 1200 psi.

Delivering VSWR as low as 1.2:1 and maximum operating frequency of 27 GHz, RF analyzer Phase-Stable Cable Assemblies are made with stainless steel-body connectors, silver-plated copper cable conductors, a UV-resistant jacket and multi-layer armor. Units are available with 7/16, N, SMA, TNC or 3.5mm connector options. Cables assemblies are operated in -55°C to +105°C temperature range and are...

Read More »
PIN Diode Waveguide Switches come with TTL driver circuit.
Electrical Equipment & Systems

PIN Diode Waveguide Switches come with TTL driver circuit.

Available in four models with WR10 and WR12 waveguide ports, SPST and DPDT PIN Diode Waveguide Switches cover E-band (60 to 90 GHz) and W-band (75 to 110 GHz) frequencies. Units offer a switching speed of <300 nsec, 4 dB typical insertion loss and greater than 25 dB of Isolation. Housed in MIL-grade compact package configurations, units are operated in -55°C to +85°C temperature range with ± 5...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers