Pasternack Enterprises

Broadband Low Noise Amplifiers range from 30 MHz to 40 GHz.
Communication Systems & Equipment

Broadband Low Noise Amplifiers range from 30 MHz to 40 GHz.

With noise figure levels from 2.5–3 dB typ across entire band, ultra-broadband and millimeter wave low noise amplifiers (LNAs) include 17 unconditionally stable models covering multi-octave bandwidths with flat gain response and GaAs PHEMT semiconductor technology. Features include 50Â- Ω hybrid MIC circuits enclosed in environmentally sealed metal packages with nickel or gold plating,...

Read More »
RF Relay Switches deliver 2-10 million life cycles.
Electrical Equipment & Systems

RF Relay Switches deliver 2-10 million life cycles.

Available in varieties from SPDT through SP12T, Electromechanical Relay Switches feature frequencies from DC to 40 GHz, depending on model. Hi-rel coaxial RF switches operate from +12 to +30 V with power ratings from 5–700 W, isolation up to 85 dB, and low insertion loss of 0.15 dB at 1 GHz. With rugged MIL-STD-202 qualified construction, switches withstand exposure to sine and random vibration...

Read More »
Broadband RF Power Combiners operate up to 6 GHz.
Electronic Components & Devices

Broadband RF Power Combiners operate up to 6 GHz.

Offered in 2-way and 4-way configurations, RF Power Combiners deliver up to 600 W and operate over temperature range of 55–85°C. Units combine or sum number of RF input signals to common output, while maintaining characteristic impedance of inputs. Designed to be screw-down mounted to heatsink, combiners offer frequency range from 20 MHz to 6 GHz, low insertion loss from 0.35–1 dB, and...

Read More »
Pasternack Introduces Expanded Lines of In-Stock RF Amplifiers
Communication Systems & Equipment

Pasternack Introduces Expanded Lines of In-Stock RF Amplifiers

The Industry’s Largest Selection of Off-the-Shelf Connectorized RF Amplifiers Unveiled by Pasternack Irvine, CA - Pasternack Enterprises, Inc., a leading manufacturer and supplier of RF, microwave and millimeter wave products, has significantly expanded their portfolio of connectorized RF amplifiers including high power amplifiers, high-rel amplifiers, broadband amplifiers, limiting amplifiers,...

Read More »
Linear RF Amplifiers operate from 0.8-9.5 GHz.
Communication Systems & Equipment

Linear RF Amplifiers operate from 0.8-9.5 GHz.

With gain performance from 18–32.5 dB, Coaxial GaAs PHEMT MMIC-based Amplifiers are suited for commercial and defense applications such as communications, radar and sensors, test instrumentation, telecom infrastructure, fixed microwave backhaul, and commercial 2-way radio. Units offer gain flatness from ±0.5 dB to ±2 dB and third order intercept levels from 38.5–47 dBm. Rated for...

Read More »
PIN Diode Switches offer 1-12 GHz range and 90 dB isolation.
Electrical Equipment & Systems

PIN Diode Switches offer 1-12 GHz range and 90 dB isolation.

Designed with CMOS transistor-transistor logic (TTL) drivers, 3 PIN diode switch modules are fully matched internally for 50 Ω input and output. This eliminates need for additional sensitive RF tuning components. Port-to-port isolation is >90 dB at 1–2 GHz, 80 dB at 2–4 GHz, and 75 dB at 6–12 GHz, and insertion loss varies from 1.0–2.5 dB depending on frequency and switching speed...

Read More »
Cable Jumpers with Formable Coax suit low PIM applications.
Electrical Equipment & Systems

Cable Jumpers with Formable Coax suit low PIM applications.

Low PIM (-160 dBc) formable cables are made using tin-filled braid that produces hand-formable, solid outer conductor wall. Along with 0.163 and 0.276 in. coax diameters, these RF cables are available with several connector options: 7/16 DIN, 4.1/9.5 mini-DIN, Type N, and SMA. Connectors’ TriMetal plating, soldered connection point, and coaxial cable construction produce low PIM performance for...

Read More »
F-Type Attenuators operate from DC to 3 GHz at max power of 2 W.
Electronic Components & Devices

F-Type Attenuators operate from DC to 3 GHz at max power of 2 W.

Offered in 1–10 dB values in 1 dB steps, with 16 and 20 dB values also available, F attenuators serve broadcast, HDTV, and satcom applications in L and S microwave bands. These F 75 Ω fixed attenuators, which meet IEC 60169-24 standards, are used for signal leveling and to reduce strong input signals to sensitive broadcasting equipment. Elements of construction include tri-metal plated brass...

Read More »
Rugged 2 W, 40 GHz Attenuators suit RF-related applications.
Electronic Components & Devices

Rugged 2 W, 40 GHz Attenuators suit RF-related applications.

Intended for applications requiring reliable broadband performance from DC to 40 GHz (Ka microwave band), PE7395-xx millimeter wave, 40 GHz fixed attenuators are designed with 2.92 mm connectors and allow input power of 2 W. Attenuation from 0–20 dB is available depending on model, and construction with passivated stainless steel bodies and Beryllium Copper (BeCu) contacts withstands continued...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers