Company News

Pasternack Enterprises

17802 Fitch, Irvine, CA, 92614, USA

  • 866-727-8376

Latest New Product News from
Pasternack Enterprises

Electronic Components & Devices

Waveguide to Coax Adapters offer a VSWR as low as 1.15:1.

Sep 29, 2017

Suitable for applications instrumentation, test benches, high efficiency RF/Microwave transmission, SATCOM, and MILCOM, Waveguide to Coax Adapters are offered in sizes from WR-10 to WR-430 and with aluminum, gold-plated aluminum or painted copper alloy finishing. These units cover a frequency range from 1.7GHz to 110GHz waveguide bands, units are available with UG (square/round cover), CMR,... Read More

Electrical Equipment & Systems

Electromechanical Switches feature latching actuators.

Sep 29, 2017

Electromechanical Switches are available single-pole double-throw, single-pole four-throw and single-pole six-throw configurations. Units feature indicators, self-cut-off, TTL and 50 Ohm terminations and are suitable for electronic countermeasures, microwave radio and VSWT applications. Products offer low insertion loss repeatability of 0.03 to 0.05 dB and input power ratings of 70 watts CW.... Read More

Electronic Components & Devices

Relay Controlled Programmable Attenuators are RoHS compliant.

Sep 13, 2017

Programmable Attenuators are available in six models with frequency bands from DC to 2000 MHz and attenuation levels ranging from 0 to 127 dB. Units are operated in a temperature range of -20°C to +85°C and come with female SMA or F-type connectors. Offering low insertion loss ranging from 0.8 to 3.5 dB, attenuation accuracy of ± 0.5 dB and input power up to 1-watt CW, products are housed... Read More

Electrical Equipment & Systems

SPP-250-LLPL Cable Assemblies feature maximum PIM level of -155 dBc.

Sep 07, 2017

UL910 Plenum-Rated SPP-250-LLPL Cable Assemblies are available with 4.3-10, 7/16 DIN, N and 4.1-9.5 mini-DIN connector combinations and are suitable for distributed antenna systems (DAS), indoor wireless systems, multi-carrier communication systems and PIM testing. Offering a VSWR of 1.25:1 up to 2 GHz and 1.35:1 up to 6 GHz, units are operated in -55°C to +125°C temperature range. These... Read More

Electrical Equipment & Systems

RF Analyzer Cable Assemblies feature crush resistance of 1200 psi.

Aug 09, 2017

Delivering VSWR as low as 1.2:1 and maximum operating frequency of 27 GHz, RF analyzer Phase-Stable Cable Assemblies are made with stainless steel-body connectors, silver-plated copper cable conductors, a UV-resistant jacket and multi-layer armor. Units are available with 7/16, N, SMA, TNC or 3.5mm connector options. Cables assemblies are operated in -55°C to +105°C temperature range and are... Read More

Communication Systems & Equipment, Electrical Equipment & Systems

PIN Diode Waveguide Switches come with TTL driver circuit.

Aug 04, 2017

Available in four models with WR10 and WR12 waveguide ports, SPST and DPDT PIN Diode Waveguide Switches cover E-band (60 to 90 GHz) and W-band (75 to 110 GHz) frequencies. Units offer a switching speed of <300 nsec, 4 dB typical insertion loss and greater than 25 dB of Isolation. Housed in MIL-grade compact package configurations, units are operated in -55°C to +85°C temperature range with... Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

Power Amplifier Accessories are suitable for testing applications.

Aug 02, 2017

RF and Microwave Power Amplifier Accessories consist of heat sinks with cooling fans and power control cable assemblies. Heat sinks are suitable for test and measurement applications and come with finned extrusion profiles with baseplate mounting surfaces. Units are offered in eight different models and feature thermal mounting gaskets. Heat sinks are supplied with AC or DC power options... Read More

Electronic Components & Devices

Waveguide Phase Shifters provide phase shift of 0 to 180 degrees.

Jul 14, 2017

Having a frequency range from 18 GHz to 110 GHz in 7 waveguide bands from K to W band, Waveguide Phase Shifters are constructed of gold-plated brass waveguide material. Delivering maximum insertion loss of 1dB, units are suitable for aerospace, defense, industrial, telecom, instrumentation applications. Phase shifters are available in sizes ranging from WR-42 to WR-10.

Read More

Communication Systems & Equipment

Straight Waveguide Sections can deliver 1.03:1 VSWR.

Jun 17, 2017

Consisting of 62 models, Straight Waveguide Sections come in WR-10 to WR-137 sizes. Operated from 5.85 GHz to 110 GHz frequency range, units are available in section lengths from 3 in. to 12 in. Made of painted copper alloy or gold-plated, oxygen-free hard copper, product comes with UG, CPR and UBR-style flanges. Offering 13 waveguide bands, waveguide sections are suitable for aerospace,... Read More

Mounting & Attaching Products

BMA Connectors and Adapters feature gold-plated BeCu contacts.

May 27, 2017

Suitable in blind mating, phased array systems, rack and panels, BMA Connectors and Adapters are operated in -65°C to +125°C temperature range. Available in military and hermetic versions made of stainless steel and brass respectively, connectors feature 1.2:1 VSWR whereas adapters offer VSWR of 1.15:1. Units provide radial and axial float in alignment applications.

Read More

Communication Systems & Equipment, Electronic Components & Devices, Mechanical Power Transmission

Coaxial Broadband Limiting Amplifiers come in hermetically-sealed packages.

May 25, 2017

Available in PE15A6002, PE15A6015, PE15A6007, PE15A6008, PE15A6012 models, Coaxial Broadband Limiting Amplifiers feature frequency range from 1 GHz to 18 GHz and gain levels of 40 to 80 dB. Offering input between -61 dBm to +20 dBm range and power output deviation of ±0.5 dB, units are operated from -30° to +70°C. Used in electronic warfare, microwave receivers and broadband communication... Read More

Electronic Components & Devices

Reference Oscillators meet MIL-STD-202 standards.

May 25, 2017

Available in SMA connectorized with DC bias pins or true surface mount packages, Free-Running Reference Oscillators come with single output frequencies of 10 MHz, 50 MHz or 100MHz. Offering frequency output stability level of ± 5 ppm, output power level of +7 dBm and phase noise below -150 dBc/Hz at 10 KHz, units operate from -30°C to +70°C temperature range. Products are suitable for phase... Read More

Mounting & Attaching Products

Connectors and Adapters feature corrosion-resistant tri-metal finish.

May 20, 2017

Made with silver-plated center contacts, 4.3-10 Connectors and Adapters offer 6 GHz maximum operating frequency and VSWR as low as 1.08:1. Featuring low coupling torque and PIM performance of -166 dBc, units are suitable in applications such as cable assemblies, feeder cables, base stations and DAS. Products meet IP67 standards when mated.

Read More

Electrical Equipment & Systems

Electromechanical Relay Switches provide operating life of 250K cycles.

May 15, 2017

Configured for SPDT operation, TTL logic and position indicators, Electromechanical Relay Switches are available with +12 or +28 Vdc nominal voltages. Operating in -40 to +85°C temperature range, unit offers insertion loss down to 0.01 dB and up to 105 dB isolation. Delivering switching speed of 54 to 76 msec, switches are suitable for VSAT, SATCOM and radar applications. Equipped with motor... Read More

Mounting & Attaching Products

4.3-10 Connectors and Adapters meet IEC 61169-54 standards.

May 12, 2017

Suitable in custom cable assemblies, feeder cables, mobile communications systems, base stations and small cells application, 4.3-10 Connectors and Adapters feature silver-plated center contacts and corrosion-resistant tri-metal finish on body and outer conductor. Designed with low coupling torque and PIM performance of -166 dBc, units are protected from dust and moisture when connected.

Read More

Electronic Components & Devices

Reference Oscillators feature phase noise as low as -150dBc/Hz.

May 10, 2017

Available in compact SMA connectorized package with DC bias pins or surface mount package outline, Free-Running Reference Oscillators deliver single output frequencies of 10 MHz, 50 MHz or 100MHz. Featuring output power of +7 dBm, units are operated in -30°C to +70°C temperature range. Meeting MIL-STD-202 standards, oscillators are suitable for phase locked loops, function generators and... Read More

Communication Systems & Equipment, Mechanical Power Transmission

Low Phase Noise Amplifiers meet MIL-STD-883 standards.

Apr 18, 2017

Available in models ranging from 1.5 to 18 GHz frequency with -180 dBc/Hz offset residual phase noise at 10 KHz, Low Phase Noise Amplifiers are suitable for electronic warfare, VSAT and radar applications. Offering 9 to 14 dB of small signal gain with 5.5 dB noise figure, units are housed in gold-over-nickel-plated Kovar™ metal drop-in packages. Having Psat levels from +16 to +25 dBm range,... Read More

Electrical Equipment & Systems

VNA Test Cables feature Nomex® outer sleeve.

Apr 13, 2017

Available in 6 and 12 in. lengths with male-to-male or male-to-female configurations, VNA Test Cables provides precise results for testing with coaxial cable and 1.0 mm stainless steel connector interfaces. Operated at up to 110 GHz in -65°C to +125°C temperature range, units feature 50 Ohm impedance and 1.5:1 maximum VSWR. Suitable for semiconductor probe testing, automotive and military... Read More

Materials & Material Processing

IQ Mixer Modules come in Kovar™ drop-in metal package.

Apr 07, 2017

Used in point-to-point and point-to-multipoint radio, VSAT, Military Radar, EW, Satellite communications, sensors applications, IQ Mixer Modules are designed with 90° hybrid and 0° splitter/combiner. Offering image rejection up to 35 dB and LO to RF Isolation up to 42 dB, units LO drive power ranges from +15 to +19 dBm. Meeting RoHS and MIL-STD-883 standards, Mixers are configurable as image... Read More

Electrical Equipment & Systems, Optics & Photonics

PEM010 Millimeter Wave Transmitter Module features WR-15 waveguide port.

Mar 20, 2017

Operated in 57.0 to 64.8 GHz frequency spectrum, PEM010 Millimeter Wave Transmitter Module offers 38 dB gain, +12 dBm output P1dB and 34 dB image rejection up to 1.8 GHz modulation bandwidth. Providing -111 dBc/Hz offset phase noise at 10 MHz, transmitter uses two reference clocks for setting 540 MHz or 500 MHz channel spacing. Units are used in wireless gigabit Ethernet data communications... Read More

Other Company News from
Pasternack Enterprises