AGC Chemicals Americas, Inc.

Suite 201
Exton, PA 19341

New Fluorinated Solvents are Chemically and Thermally Stable
Amolea AT2 and AsahiKlin AE-3000 cleaning solvents have no flash point, no ODP, LGWP and low surface tension. Energy efficient due to their low latent heat of vaporization and can be recycled with distillation. Used to clean a range of medical devices like orthopedic implants, catheters, tubes, scopes, needles, dental devices and surgical tools.
Read More »
Fluoropolymer Materials from AGC Chemicals Improve Performance and Aesthetics of Stadium Roofs and Facades Worldwide
EXTON, Pa., November 11, 2019 — Fluon® ETFE film and Fluon® PTFE for architectural fabrics from AGC Chemicals are used in stadium constructions around the world to provide stylish exteriors that can resist UV light, water, wind, chemicals and other harsh conditions. Fluon ETFE film is used in membrane structures, architectural facades and roofing. Fluon PTFE is used to coat glass cloth and...
Read More »
New Advanced Fluoropolymer Solutions Provides Durability, Flexibility and Heat Resistance
Fluon+ materials use advanced fillers, pigment systems and additives to improve the performance of Fluon® fluoropolymer resin. Fluon+ modified PEEK retains mechanical properties at high temperatures up to 200°C. AFLAS fluoroelastomers are ideal for transmission cable and HEV/EV cable for automotive applications.
Read More »
AFLAS® 100 Series Fluoroelastomers Enhance Performance of Pumps, Valves and Seals
EXTON, Pa., August 21, 2019 — Components used in industrial equipment must withstand taxing conditions in order to reduce downtime needed to repair or replace malfunctioning parts. To help manufacturers of industrial parts address this challenge, AGC Chemicals Americas offers AFLAS® 100 series fluoroelastomers to enhance the performance and extend the life of pumps, seals and valves used in...
Read More »
AFLAS® Fluoroelastomer Grades Receive FDA Approval for Food Contact
EXTON, Pa., July 22, 2019 — AGC Chemicals Americas, Inc. announces the U.S. Food and Drug Administration has approved three grades of AFLAS® fluoroelastomers for food contact. AFLAS 150P, 100S and 100H fluoroelastomer grades can now be utilized in equipment used in food processing applications. These AFLAS grades are ideal for components like seals, sanitary gaskets, O-rings, valve seats and...
Read More »
New AFLAS 400E and 600X Withstands Continuous Temperature up to 200 degree C
Laminated directly to dissimilar elastomers without using a tie layer. Offer manufacturers an alternative to materials like acrylic rubber, silicone rubber and FKM. Ideal for automotive hose applications including intercooler, blow-by, turbocharger, oil cooler, oil return and positive crankcase ventilation.
Read More »
New Amolea AT2 Includes No Ozone Depletion Potential, Low Global Warming Potential and is Non-Flammable
Ideal to clean medical devices like orthopedic implants, catheters, tubes, scopes, needles, dental devices and surgical tools. Used as precision cleaner, defluxing agent, carrier solvent for silicone and fluorinated lubricants and moisture displacement fluid. Demonstrates solvency with variety of press, cutting, silicone and refrigerant oils, greases, asphalt pitches and fluxes used in...
Read More »
New AFLAS 150E Series Fluoroelastomers Ensure Reliability at Temperatures Up to 200 Degrees Celsius
Suitable for use in high voltage power cables in electric and hybrid electric vehicles. Resistant to vibration, acids and bases, solvents, ozone and steam and withstand attack from amine-containing additives in oils and transmission fluids. Can be easily compounded by open mill and internal mixers and fabricated into finished parts and shapes.
Read More »
FORBLUE FLEMION Fluorinated Ion Exchange Membranes are Suitable for Electrolysis Plants
Reduces the influence of brine impurities such as Ca and Mg and allows manufacturers to maintain 97-98% electrical current efficiency. Utilizes reduced electrical current for decomposing purified brine. Used in the manufacturing of caustic soda/caustic potash, chlorine and hydrogen-basic chemical products.
Read More »
New Fluon ETFE Film Features Non-stick, Insulation and Anti-fouling Properties as well as Resistance to Heat, Chemicals and Weather
Light transmission is more than 90 percent, allowing more penetration of sunlight than ordinary glass. Made of a thermoplastic fluoropolymer and is used for electronics, solar cells, wallpaper as well as greenhouses. Provides exceptional weatherability, allowing it to withstand temperatures up to 200 °C.
Read More »