Jkmicrosystems, Inc.
Ste D
Davis, CA 95616
Share:
Low Power Computer Captures and Transmits Remote Data
The JK microsystems DataMover offers an economical solution to remote data capture and transmission. By integrating optional GPS receiver, GPRS cell modem and sleep-mode power controller in a die cast aluminum enclosure, the DataMover is capable of logging and transmitting data from remote or inaccessible locations. With power consumption of less than one watt during operation and less than 3...
Read More »Computer System is tailored for embedded applications.
Thin Client-T system combines VIA Technologies Mini ITX mainboard with industrial 8-30 Vdc input power management system, 2 IDE Compact Flash slots, Watchdog timer, 24x CD-ROM, and 20 GB 2.5 in. HDD. It operates like desktop PC equipped with features suited for embedded systems and permits use of DOS, Linux, and Windows OS. Motherboard has 533 MHz VIA Eden ESP 5000 x86 microprocessor and provides...
Read More »DOS Controller is Ethernet-enabled.
Equipped for DAQ, industrial control, and communications applications, picoFlash consists of 186 compatible DOS computer with 40 MHz RDC R8822 microprocessor, NE2000 compatible Ethernet, 512K DRAM, and 512K Flash memory. Programmable, compact SBC also has 2 serial ports, 16 bits of I/O, hardware clock/calendar, and non-volatile memory expansion slot. Other offerings include watchdog timer, 5 Vdc...
Read More »Single Board Computer works with -µC/OS-II kernel.
Flashlite 186 SBC is a DOS-based embedded controller powered by 186 compatible microprocessor. It includes 2 serial ports, 44 digital I/O lines, 512 K DRAM, 512 K Flash memory, and socket for expanding non-volatile memory. MicroC/OS-II is a portable, ROMable kernel for microprocessors and microcontrollers that can manage up to 63 application tasks. Development kit provides evaluation platform for...
Read More »Motherboard includes watchdog timer and Compact Flash.
Thin Client is built around Mini-ITX motherboard and operates like desktop PC with multimedia, operating system and device support, and hardware features for embedded environments. It includes 8-30 Vdc input power management system, status LEDs, 2 onboard IDE Compact Flash slots, and Watchdog timer. Driven by 533 MHz VIA Eden ESP 5000 microprocessor, motherboard provides VGA port, 10/100 Ethernet...
Read More »Power Controller controls input power to SBCs.
Smaller than one credit card, PowerNut provides regulated 5 Vdc using its onboard 7-30 Vdc regulator or furnishes power directly from source to downstream devices at up to 1 A. By sending commands to PowerNut, main controller can monitor input voltage and turn off power to itself or another device for specified periods of time. Using ultra-low quiescent current regulator and low-power PIC...
Read More »DOS Controller suits data acquisition applications.
Programmable Flashlite 186 is built around 33 MHz 186 compatible processor. Single Board Computer offers 44 configurable digital I/O lines, 512 K DRAM and 512 K Flash memory, 2 serial ports, and console/debug port. Additional offerings include onboard 7-34 Vdc voltage regulator, two 16-bit timers, and watchdog timer. Unit supports addition of LCDs, keypads, 12-bit A/D channels, relay outputs,...
Read More »Development Kit evaluates real-time kernel.
Ã-µFlashTCP Development Kit provides evaluation of Ã-µC/OS-II Real-Time Kernel. When used together, software engineers and system integrators can learn and apply Ã-µC/OS-II into real-time embedded applications. Controller is a DOS based SBC powered by Intel 386Ex microprocessor. It is equipped with 10Base-T Ethernet port, 2 serial ports, 10 digital I/O lines, 512K SRAM and 512K Flash...
Read More »Peripheral Board adds 4 serial ports to controller.
4Serial/Parallel board is for use with LogicFlex controller. Powered by 25 MHz Intel 386Ex microprocessor, LogicFlex offers over 40 digital I/O lines, 10Base-T Ethernet port, Xilinx in-circuit programmable CPLD, 512 K SRAM, and 512 K Flash memory. For multiple serial port applications, 4Serial/Parallel board provides flexibility of adding 4 serial ports and parallel port, allowing system to...
Read More »Embedded Microcomputer allows communication via Ethernet.
Dual-E is designed for data acquisition, networking, or industrial control applications requiring multiple network connections. Equipped with 2 independent Ethernet ports, Dual-E can function as bridge between separage networks, serve as miniature firewall/router, or provide Ethernet and serial connectivity to existing equipment.
Read More »Low Power Computer Captures and Transmits Remote Data
The JK microsystems DataMover offers an economical solution to remote data capture and transmission. By integrating optional GPS receiver, GPRS cell modem and sleep-mode power controller in a die cast aluminum enclosure, the DataMover is capable of logging and transmitting data from remote or inaccessible locations. With power consumption of less than one watt during operation and less than 3...
Read More »Computer System is tailored for embedded applications.
Thin Client-T system combines VIA Technologies Mini ITX mainboard with industrial 8-30 Vdc input power management system, 2 IDE Compact Flash slots, Watchdog timer, 24x CD-ROM, and 20 GB 2.5 in. HDD. It operates like desktop PC equipped with features suited for embedded systems and permits use of DOS, Linux, and Windows OS. Motherboard has 533 MHz VIA Eden ESP 5000 x86 microprocessor and provides...
Read More »DOS Controller is Ethernet-enabled.
Equipped for DAQ, industrial control, and communications applications, picoFlash consists of 186 compatible DOS computer with 40 MHz RDC R8822 microprocessor, NE2000 compatible Ethernet, 512K DRAM, and 512K Flash memory. Programmable, compact SBC also has 2 serial ports, 16 bits of I/O, hardware clock/calendar, and non-volatile memory expansion slot. Other offerings include watchdog timer, 5 Vdc...
Read More »Single Board Computer works with -µC/OS-II kernel.
Flashlite 186 SBC is a DOS-based embedded controller powered by 186 compatible microprocessor. It includes 2 serial ports, 44 digital I/O lines, 512 K DRAM, 512 K Flash memory, and socket for expanding non-volatile memory. MicroC/OS-II is a portable, ROMable kernel for microprocessors and microcontrollers that can manage up to 63 application tasks. Development kit provides evaluation platform for...
Read More »Motherboard includes watchdog timer and Compact Flash.
Thin Client is built around Mini-ITX motherboard and operates like desktop PC with multimedia, operating system and device support, and hardware features for embedded environments. It includes 8-30 Vdc input power management system, status LEDs, 2 onboard IDE Compact Flash slots, and Watchdog timer. Driven by 533 MHz VIA Eden ESP 5000 microprocessor, motherboard provides VGA port, 10/100 Ethernet...
Read More »Power Controller controls input power to SBCs.
Smaller than one credit card, PowerNut provides regulated 5 Vdc using its onboard 7-30 Vdc regulator or furnishes power directly from source to downstream devices at up to 1 A. By sending commands to PowerNut, main controller can monitor input voltage and turn off power to itself or another device for specified periods of time. Using ultra-low quiescent current regulator and low-power PIC...
Read More »DOS Controller suits data acquisition applications.
Programmable Flashlite 186 is built around 33 MHz 186 compatible processor. Single Board Computer offers 44 configurable digital I/O lines, 512 K DRAM and 512 K Flash memory, 2 serial ports, and console/debug port. Additional offerings include onboard 7-34 Vdc voltage regulator, two 16-bit timers, and watchdog timer. Unit supports addition of LCDs, keypads, 12-bit A/D channels, relay outputs,...
Read More »Development Kit evaluates real-time kernel.
Ã-µFlashTCP Development Kit provides evaluation of Ã-µC/OS-II Real-Time Kernel. When used together, software engineers and system integrators can learn and apply Ã-µC/OS-II into real-time embedded applications. Controller is a DOS based SBC powered by Intel 386Ex microprocessor. It is equipped with 10Base-T Ethernet port, 2 serial ports, 10 digital I/O lines, 512K SRAM and 512K Flash...
Read More »Peripheral Board adds 4 serial ports to controller.
4Serial/Parallel board is for use with LogicFlex controller. Powered by 25 MHz Intel 386Ex microprocessor, LogicFlex offers over 40 digital I/O lines, 10Base-T Ethernet port, Xilinx in-circuit programmable CPLD, 512 K SRAM, and 512 K Flash memory. For multiple serial port applications, 4Serial/Parallel board provides flexibility of adding 4 serial ports and parallel port, allowing system to...
Read More »Embedded Microcomputer allows communication via Ethernet.
Dual-E is designed for data acquisition, networking, or industrial control applications requiring multiple network connections. Equipped with 2 independent Ethernet ports, Dual-E can function as bridge between separage networks, serve as miniature firewall/router, or provide Ethernet and serial connectivity to existing equipment.
Read More »