SBS Technologies Inc.
Albuquerque, NM 87110
Share:
Ruggedized COTS Chassis come in various configurations.
Supplied with backplane, power supply, I/O wiring, and necessary connectors, 7 ruggedized chassis are available with VME or CompactPCIÃ-® backplanes for 3U or 6U COTS boards. Product support SBS systems deployed in harsh environments, and standard backplane technology enables COTS-based application solutions. Also offered as customized systems based user requirements and qualifications,...
Read More »Carrier Blade supports telecom master clock generation.
Suited for IBM BladeCenter systems, BCT4-AMC1 carrier blade hosts up to 4 AdvancedMC modules to create application-specific blades from SBS Telum(TM) modules and other third-party AdvancedMC cards. Its 2 front-accessible AdvancedMC bays are hot-swappable, as is blade itself. Product features x8 PCIe interface to bays 2 and 3 and x4 PCIe interface to bays 0 and 1. Included Baseboard Management...
Read More »CompactPCI-® SBC supports 1.8 GHz Intel Pentium M processor.
In 6U form factor, CE9 utilizes Intel 855GME chipset with 6300ESB and features soldered 333 MHz DDR SDRAM with optional ECC. Product complies with PICMG 2.16 and 2.9 and supports LinuxÃ-®, VxWorksÃ-®, and WindowsÃ-® XP OS. Also offered in RoHS-compliant version, product offers 400 MHz system bus and can be used in system or non-system slot within cPCI backplane. I/O includes dual GigE...
Read More »Interface Module suits telecom edge access applications.
Multi-service Telum(TM) 1204-O3 AdvancedMCÃ-® Module can interconnect between any supplied protocols as selected on per-port basis. Software configurable unit enables packet processing, directly terminating and switching traffic on card rather than sending it to off-board processor. Processing up to 750,000 packets/sec, module supports ATM and IP interworking, as well as local port-to-port...
Read More »CompactPCI SBC operates in harsh environments.
With 3U CompactPCIÃ-® form factor, convection- or conduction-cooled CR4 is powered by 1.4 MHz low-voltage IntelÃ-® PentiumÃ-® M processor and capable of system controller or peripheral mode operation. It incorporates Intel 855GME chipset, which includes Intel 855GME GMCH and Intel 6300ESB ICH. Connectivity is provided via 2 Gigabit Ethernet ports, two 32-bit 33/66 MHz PCI bus...
Read More »PMC Modules offer 3D graphics processing capabilities.
Offered in commercial, extended temperature, and conduction-cooled versions, G2 Graphics PMC Modules are based on RadeonÃ-® Mobility 9000 mobile graphics processor with support for 2D and 3D acceleration, OpenGL, and DirectX. G2 Basic PMC supplies single display output channel, G2 Dual PMC adds another display channel, and G2 Plus PMC provides dual display outputs plus up to 2 channels of...
Read More »PMC Card suits new or upgraded embedded applications.
Powered by 1.4 GHz IntelÃ-® PentiumÃ-® M Low Voltage processor or IntelÃ-® CeleronÃ-® M Ultra Low Voltage processor, Model PSL09 supports 33/66 MHz PCI bus, and incorporates power management technology, VGA interface, and 256 Mbytes of 333 MHz DDR SDRAM with optional ECC. It provides embedded designers with 4 USB 2.0 ports, 2 serial ATA channels, and 2 Fast Ethernet ports. Card...
Read More »
I/O and Processor Modules target telecom manufacturers.
Telum(TM) AdvancedMC(TM) Modules provide telecom equipment manufacturers with range of options for creating carrier grade network applications featuring IntelÃ-® PentiumÃ-® M processors. Model PCIE-AMC-7S Chassis allows PCI-Express-based workstations or servers to control backplane populated with hot swappable AdvancedMC modules plugged directly into backplane. Standalone 2U 19 in....
Read More »InfiniBand Driver has SDP and IPoIB for VxWorks-® RTOS.
Incorporating Sockets Direct Protocol (SDP) and IP over InfiniBandÃ-® (IPoIB) technology for InfiniBand host channel adapters (HCAs), IB4X-VXWORKS driver enables up to 200 Mb/s data throughput for VxWorks embedded applications. Along with subnet manager, driver provides mirror API application programming interface. Specific applications include medical imaging and avionics, military, and...
Read More »ATM Network Module suits telecommunications systems.
Featuring line traffic management that supports CBR and VBR, Telum 1001-DE DS3/E3 ATM network adapter supports full-duplex ATM DS3/E3 port for protocol data unit sizes as small as 2 cells. IPMI microcontroller subsystem initializes board-level parameters and monitors board voltage and temperature while maintaining system status. Channel and Digital Service Unit provides line alarm conditions and...
Read More »Ruggedized COTS Chassis come in various configurations.
Supplied with backplane, power supply, I/O wiring, and necessary connectors, 7 ruggedized chassis are available with VME or CompactPCIÃ-® backplanes for 3U or 6U COTS boards. Product support SBS systems deployed in harsh environments, and standard backplane technology enables COTS-based application solutions. Also offered as customized systems based user requirements and qualifications,...
Read More »Carrier Blade supports telecom master clock generation.
Suited for IBM BladeCenter systems, BCT4-AMC1 carrier blade hosts up to 4 AdvancedMC modules to create application-specific blades from SBS Telum(TM) modules and other third-party AdvancedMC cards. Its 2 front-accessible AdvancedMC bays are hot-swappable, as is blade itself. Product features x8 PCIe interface to bays 2 and 3 and x4 PCIe interface to bays 0 and 1. Included Baseboard Management...
Read More »CompactPCI-® SBC supports 1.8 GHz Intel Pentium M processor.
In 6U form factor, CE9 utilizes Intel 855GME chipset with 6300ESB and features soldered 333 MHz DDR SDRAM with optional ECC. Product complies with PICMG 2.16 and 2.9 and supports LinuxÃ-®, VxWorksÃ-®, and WindowsÃ-® XP OS. Also offered in RoHS-compliant version, product offers 400 MHz system bus and can be used in system or non-system slot within cPCI backplane. I/O includes dual GigE...
Read More »Interface Module suits telecom edge access applications.
Multi-service Telum(TM) 1204-O3 AdvancedMCÃ-® Module can interconnect between any supplied protocols as selected on per-port basis. Software configurable unit enables packet processing, directly terminating and switching traffic on card rather than sending it to off-board processor. Processing up to 750,000 packets/sec, module supports ATM and IP interworking, as well as local port-to-port...
Read More »CompactPCI SBC operates in harsh environments.
With 3U CompactPCIÃ-® form factor, convection- or conduction-cooled CR4 is powered by 1.4 MHz low-voltage IntelÃ-® PentiumÃ-® M processor and capable of system controller or peripheral mode operation. It incorporates Intel 855GME chipset, which includes Intel 855GME GMCH and Intel 6300ESB ICH. Connectivity is provided via 2 Gigabit Ethernet ports, two 32-bit 33/66 MHz PCI bus...
Read More »PMC Modules offer 3D graphics processing capabilities.
Offered in commercial, extended temperature, and conduction-cooled versions, G2 Graphics PMC Modules are based on RadeonÃ-® Mobility 9000 mobile graphics processor with support for 2D and 3D acceleration, OpenGL, and DirectX. G2 Basic PMC supplies single display output channel, G2 Dual PMC adds another display channel, and G2 Plus PMC provides dual display outputs plus up to 2 channels of...
Read More »PMC Card suits new or upgraded embedded applications.
Powered by 1.4 GHz IntelÃ-® PentiumÃ-® M Low Voltage processor or IntelÃ-® CeleronÃ-® M Ultra Low Voltage processor, Model PSL09 supports 33/66 MHz PCI bus, and incorporates power management technology, VGA interface, and 256 Mbytes of 333 MHz DDR SDRAM with optional ECC. It provides embedded designers with 4 USB 2.0 ports, 2 serial ATA channels, and 2 Fast Ethernet ports. Card...
Read More »
I/O and Processor Modules target telecom manufacturers.
Telum(TM) AdvancedMC(TM) Modules provide telecom equipment manufacturers with range of options for creating carrier grade network applications featuring IntelÃ-® PentiumÃ-® M processors. Model PCIE-AMC-7S Chassis allows PCI-Express-based workstations or servers to control backplane populated with hot swappable AdvancedMC modules plugged directly into backplane. Standalone 2U 19 in....
Read More »InfiniBand Driver has SDP and IPoIB for VxWorks-® RTOS.
Incorporating Sockets Direct Protocol (SDP) and IP over InfiniBandÃ-® (IPoIB) technology for InfiniBand host channel adapters (HCAs), IB4X-VXWORKS driver enables up to 200 Mb/s data throughput for VxWorks embedded applications. Along with subnet manager, driver provides mirror API application programming interface. Specific applications include medical imaging and avionics, military, and...
Read More »ATM Network Module suits telecommunications systems.
Featuring line traffic management that supports CBR and VBR, Telum 1001-DE DS3/E3 ATM network adapter supports full-duplex ATM DS3/E3 port for protocol data unit sizes as small as 2 cells. IPMI microcontroller subsystem initializes board-level parameters and monitors board voltage and temperature while maintaining system status. Channel and Digital Service Unit provides line alarm conditions and...
Read More »