Blockmaster Electronics

HP-RTG-C 3-Pole High-Power Block is RoHS compliant.
Electrical Equipment & Systems

HP-RTG-C 3-Pole High-Power Block is RoHS compliant.

HP-RTG-C 3-Pole High-Power Block is operated in a temperature range of -25° C to +150° C. Unit comes in PA 66 (UL94V-0) housing and is suitable for panels, CNC equipment, standby generators, switch gear, water pumps, industrial and commercial applications. Offering withstanding voltage AC of 2,500 V, this product is available in terminals such as copper – current conducting plate and...

Read More »
HP-ATA-90 Series High-Power Dead Front Terminal Block comes in PBT G30% housing.
Electrical Equipment & Systems

HP-ATA-90 Series High-Power Dead Front Terminal Block comes in PBT G30% housing.

HP-ATA-90 Series High-Power Dead Front Terminal Block is offered in through 12 poles, with a 12.7mm pitch. Unit is available in line side and load side of ¼-28 UNF slot terminations. Product is suitable for Panels, CNC equipment, standby generators, switch gear, lighting panels, industrial and commercial applications. Operated in a temperature range of -25° C to +125° C, this terminal block...

Read More »
Terminal Blocks have modular panel feed-through design.
Electrical Equipment & Systems

Terminal Blocks have modular panel feed-through design.

Used in various power distribution and terminal applications, MPT series has power handling ranges from 24 A/450 V to 150 A/1,000 V and can accept- 14–1 AWG stranded as well as 12–2 AWG solid wire ranges among 7 different sizes. Modularity allows any number of positions to be assembled on line or in field; each position interlocks together for seamless side-by-side or stackable...

Read More »
Terminal Blocks isolate internal circuits from interference.
Electrical Equipment & Systems

Terminal Blocks isolate internal circuits from interference.

With MPT Panel Feed Through Terminal Blocks, field wiring is outside enclosure and product circuits are inside shielded cabinet or box, enabling designers to isolate circuits from interference. Ten modules are available with ratings from 24 A/450 V to 150 A/1,000 V and pitches from 7.5-18.8 mm. Variety of push-on tab, solder, and screw terminations are offered. Mounting to panels is accomplished...

Read More »
Feed Through Terminal Blocks isolate circuit from EMI/RFI.
Electrical Equipment & Systems

Feed Through Terminal Blocks isolate circuit from EMI/RFI.

Rated from 24 A/450 V to 150 A/1,000 V, MPT Series includes 10 modules in pitches of 7.5-18.8 mm. Field wiring is outside enclosures and product circuits are inside shielded cabinet or box. Mounting to panels is accomplished with knurled-nut, snap-on wedges, or mounting screws depending on current rating of module. Applications include medical imaging, motor and robotic motor control generator...

Read More »
Terminal Blocks are engineered for pick and place production.
Electrical Equipment & Systems

Terminal Blocks are engineered for pick and place production.

Compatible with re-flow soldering techniques, STH series terminal blocks use self-extinguishing halogen-free UL94 V-0 plastic housing material and have temperature tolerance of up to 270-ºC. They are offered in pitches of 3.81-15.0 mm in modular or side-stackable configurations with 2-6 pole individual units. Available in choice of straight, angled, or 90º wire entry, accepting wire sizes of...

Read More »
Power Distribution Terminal Block suits panel applications.
Electrical Equipment & Systems

Power Distribution Terminal Block suits panel applications.

Suitable for HVAC equipment, switch gear, and lighting panels, Model OTB-80-3P splits higher power, large gauge wiring into low power needs for smaller wire gauge current ratings. With input power side rating of 80 A at 600 V utilizing 4-10 AWG wire, OTB-80-3P will load and split board circuits up to same input current level for 6-16 AWG branch wire sizes. Terminal block comes in 91.5 x 40.5 x...

Read More »
Terminal Connectors save PC board space.
Electrical Equipment & Systems

Terminal Connectors save PC board space.

Available in side stackable and polarized versions, CUF Series Female Connectors directly connect to comb edged male connector built on appropriate circuit board. With pole pitches of 5 and 10 mm, side-stackable units feature 2-16 poles, accommodating wire sizes from 12-30 AWG. Polarized versions come in 5-16 poles for 5 mm pitch and 2-8 poles for 10 mm pitch. Operating voltage for both types is...

Read More »
Terminal Blocks feature low profile and angled wire entry.
Electrical Equipment & Systems

Terminal Blocks feature low profile and angled wire entry.

With profile height of 8.5 mm and 55° angle of wire entry, MTB Series is furnished with double captive screws of nickel plated copper alloy with accessible testing points and housed in PA6-6 polyamide. Series is offered in configurations from 2-18 poles at 3.5 mm pitch, accepting wire size range of up to 16 AWG. Rated voltage is at 300 V with current rating up to 17.5 A, depending on utilized...

Read More »
Modular Terminal Blocks feature multi-level design.
Electrical Equipment & Systems

Modular Terminal Blocks feature multi-level design.

With up to 4 staggered levels of poles, PSQ Series offers maximum accessibility for all connection points. Units are available with 2-12 poles, in 5 and 10 mm pole pitches and accept wire sizes up to 11 AWG. Wire connections utilize M3 screws made of nickel-plated copper alloy. Rated for 300 V at 32 A, terminal blocks have PA6-6 polyamide housing and are CE, UL, CSA, VDE, and IMQ approved.

Read More »
HP-RTG-C 3-Pole High-Power Block is RoHS compliant.
Electrical Equipment & Systems

HP-RTG-C 3-Pole High-Power Block is RoHS compliant.

HP-RTG-C 3-Pole High-Power Block is operated in a temperature range of -25° C to +150° C. Unit comes in PA 66 (UL94V-0) housing and is suitable for panels, CNC equipment, standby generators, switch gear, water pumps, industrial and commercial applications. Offering withstanding voltage AC of 2,500 V, this product is available in terminals such as copper – current conducting plate and...

Read More »
HP-ATA-90 Series High-Power Dead Front Terminal Block comes in PBT G30% housing.
Electrical Equipment & Systems

HP-ATA-90 Series High-Power Dead Front Terminal Block comes in PBT G30% housing.

HP-ATA-90 Series High-Power Dead Front Terminal Block is offered in through 12 poles, with a 12.7mm pitch. Unit is available in line side and load side of ¼-28 UNF slot terminations. Product is suitable for Panels, CNC equipment, standby generators, switch gear, lighting panels, industrial and commercial applications. Operated in a temperature range of -25° C to +125° C, this terminal block...

Read More »
Terminal Blocks have modular panel feed-through design.
Electrical Equipment & Systems

Terminal Blocks have modular panel feed-through design.

Used in various power distribution and terminal applications, MPT series has power handling ranges from 24 A/450 V to 150 A/1,000 V and can accept- 14–1 AWG stranded as well as 12–2 AWG solid wire ranges among 7 different sizes. Modularity allows any number of positions to be assembled on line or in field; each position interlocks together for seamless side-by-side or stackable...

Read More »
Terminal Blocks isolate internal circuits from interference.
Electrical Equipment & Systems

Terminal Blocks isolate internal circuits from interference.

With MPT Panel Feed Through Terminal Blocks, field wiring is outside enclosure and product circuits are inside shielded cabinet or box, enabling designers to isolate circuits from interference. Ten modules are available with ratings from 24 A/450 V to 150 A/1,000 V and pitches from 7.5-18.8 mm. Variety of push-on tab, solder, and screw terminations are offered. Mounting to panels is accomplished...

Read More »
Feed Through Terminal Blocks isolate circuit from EMI/RFI.
Electrical Equipment & Systems

Feed Through Terminal Blocks isolate circuit from EMI/RFI.

Rated from 24 A/450 V to 150 A/1,000 V, MPT Series includes 10 modules in pitches of 7.5-18.8 mm. Field wiring is outside enclosures and product circuits are inside shielded cabinet or box. Mounting to panels is accomplished with knurled-nut, snap-on wedges, or mounting screws depending on current rating of module. Applications include medical imaging, motor and robotic motor control generator...

Read More »
Terminal Blocks are engineered for pick and place production.
Electrical Equipment & Systems

Terminal Blocks are engineered for pick and place production.

Compatible with re-flow soldering techniques, STH series terminal blocks use self-extinguishing halogen-free UL94 V-0 plastic housing material and have temperature tolerance of up to 270-ºC. They are offered in pitches of 3.81-15.0 mm in modular or side-stackable configurations with 2-6 pole individual units. Available in choice of straight, angled, or 90º wire entry, accepting wire sizes of...

Read More »
Power Distribution Terminal Block suits panel applications.
Electrical Equipment & Systems

Power Distribution Terminal Block suits panel applications.

Suitable for HVAC equipment, switch gear, and lighting panels, Model OTB-80-3P splits higher power, large gauge wiring into low power needs for smaller wire gauge current ratings. With input power side rating of 80 A at 600 V utilizing 4-10 AWG wire, OTB-80-3P will load and split board circuits up to same input current level for 6-16 AWG branch wire sizes. Terminal block comes in 91.5 x 40.5 x...

Read More »
Terminal Connectors save PC board space.
Electrical Equipment & Systems

Terminal Connectors save PC board space.

Available in side stackable and polarized versions, CUF Series Female Connectors directly connect to comb edged male connector built on appropriate circuit board. With pole pitches of 5 and 10 mm, side-stackable units feature 2-16 poles, accommodating wire sizes from 12-30 AWG. Polarized versions come in 5-16 poles for 5 mm pitch and 2-8 poles for 10 mm pitch. Operating voltage for both types is...

Read More »
Terminal Blocks feature low profile and angled wire entry.
Electrical Equipment & Systems

Terminal Blocks feature low profile and angled wire entry.

With profile height of 8.5 mm and 55° angle of wire entry, MTB Series is furnished with double captive screws of nickel plated copper alloy with accessible testing points and housed in PA6-6 polyamide. Series is offered in configurations from 2-18 poles at 3.5 mm pitch, accepting wire size range of up to 16 AWG. Rated voltage is at 300 V with current rating up to 17.5 A, depending on utilized...

Read More »
Modular Terminal Blocks feature multi-level design.
Electrical Equipment & Systems

Modular Terminal Blocks feature multi-level design.

With up to 4 staggered levels of poles, PSQ Series offers maximum accessibility for all connection points. Units are available with 2-12 poles, in 5 and 10 mm pole pitches and accept wire sizes up to 11 AWG. Wire connections utilize M3 screws made of nickel-plated copper alloy. Rated for 300 V at 32 A, terminal blocks have PA6-6 polyamide housing and are CE, UL, CSA, VDE, and IMQ approved.

Read More »

All Topics