Carteret, NJ 07008
New Thermal Interface Pad from Fujipoly Offers a Thermal Conductivity of 17.0 W/m.
Sarcon® 30XR-m Thermal Interface Pad is available in 200 mm × 150 mm size sheets with 0.3 mm thick TIM or can be die-cut to fit application shape. Exhibiting a thermal resistance of 0.30° C•in²/W, unit is used as an interface material between heat source and nearby heat sink.Read More »
Fujipoly's New Carbon Zebra® Connector is Suitable for Devices with Pad Spacing as Low as 0.50 mm
Carbon Zebra® Connector is offered in widths ranging from .38 mm to 3.0 mm with an operating temperature ranging from -40°C to +100°C. Unit provides a current carrying capacity of 50 mA per 0.040 x 0.040 in. pad. The connector is made from alternating layers of conductive carbon-filled and non-conductive silicone. Unit makes reliable electrical contact when place between PCB and an LCD display.Read More »
Fujipoly® Thin Film Delivers on Performance
Carteret, NJ - January 18, 2018 - Sarcon® 20YR‐c from Fujipoly® is a versatile 0.2mm film that exhibits a thermal conductivity of 4.0 W/m•K and a thermal resistance of only .12° C•in2/W. This product is ideal for transferring performance-killing heat from high power semiconductors and board-level components to nearby cooling heatsinks. Sarcon® 20YR‐c is a compliant, silicone thin...Read More »
Sarcon® GR14A-50GY Thermal Interface Material offers thermal conductivity of 1.6 W/m-K.
Sarcon® GR14A-50GY Thermal Interface Material is operated in a temperature range of -30 to +120°C. Unit is available in sheets of up to 300mm x 200mm dimensions and offers thermal resistance of .61° C•in2/W at 14.5 PSI. This 0.5mm thick product is offered in tacky surface, hardened surface or reinforced with nylon mesh. Thermal interface material is suitable for heat generating components...Read More »
Sarcon 20GAR Thermal Interface Material is suitable for complex die-cut shapes.
Sarcon® 20GAR Thermal Interface Material is available in rolls, pre-cut sheets or it can be die-cut to the required shape. Unit is suitable for appliance motor drives, electric vehicle motor drives, solar inverters and inductive heating cookers applications. 0.2 mm thick material is operated in a temperature range of ‐40°C to +150°C and delivers thermal conductivity of 3.0 W/m•K. Sarcon®...Read More »
Thermal Interface Material comes with UL94 flame retardant rating.
Sarcon® EGR-11F Thermal Interface Material is available in sheet thicknesses of 0.5, 1.0, 1.5mm. Unit comes in 300mm x 200mm maximum dimension and offers thermal conductivity of 1.0 W/m°K and a thermal resistance of 1.05°Cin2/W. Product is operated in a temperature range of -30 to +120°C. Material enables user to fill unwanted air gaps to provide efficient heat transfer.Read More »
Easy to Apply Form-in-Place Thermal Gap Filler
Carteret, NJ - Tuesday, August 22, 2017 - SARCON® SPG-20A from Fujipoly® is an easy to dispense, low-viscosity silicone compound that exhibits a thermal conductivity of 2.0 W/m°K and a thermal resistance of only 2.1°K•cm2/W. When applied between heat-generating components and a nearby heat sink or spreader, the form stable thermal material completely fills unwanted gaps as small as 0.08mm....Read More »
Extremely Soft TIM Delivers Low Thermal Resistance
Carteret, NJ - Wednesday, July 19, 2017 - Sarcon® PG25A is one of Fujipoly's softest and best performing thermal gap filler pads for applications that have delicate components and high compression rates. When it is sandwiched between components of varying shapes and sizes and a nearby heat sink or spreader, this compliant 2.5 W/m°K material exhibits a thermal resistance as low as 0.42°Cin2/W...Read More »
Thermal Gap Filler Pads come with UL94 flame retardant rating.
Available in four sheet thicknesses of 0.5, 1.0, 1.5 and 2.0mm up to maximum dimension of 300mm x 200mm, Sarcon® PG80A Thermal Gap Filler Pads are operated from -40 to +150°C temperature range. Exhibiting thermal resistance below 0.08°C-in2/W at 14.5 PSI, units are suitable for delicate or wide-variation component heights applications.Read More »
SPG-30B Thermal Gap Filler does not cause corrosion on metal surfaces.
Delivering 3.1 W/m°K of thermal conductivity with 0.33°Cin2/W thermal resistance, SPG-30B Thermal Gap Filler eliminates performance-hindering air gaps ranging from .08mm to 1.0mm. Available in 30ml pre-filled syringes or 325ml cartridges, product maintains all properties across -40°C to + 150°C temperature range. Filler is used for filling spaces, gaps and protrusions when it is compressed...Read More »