Carlo Gavazzi Inc.
Buffalo Grove, IL 60089
Variable Frequency AC Drives offer industrial motor control.
Able to handle most general-purpose, 3-phase motor control applications from 1/3-5 hp, VariFlex Drives come in 3 frame sizes, covering mains voltages from 180-528 Vac. They universally accept both single-phase and 3-phase supply voltages. Units feature standard Modbus capabilities and ability to clone programming from one drive to others via SmartStick. Drives also provide variety of fieldbus...
Read More »Switching Power Supplies meet automation market needs.
Accepting universal 90-265 Vac or 120-370 Vdc supply voltages, DIN Rail mount SPD Series produces output power ratings from 5-240 W. Potentiometer is included for fine-tuning dc output voltage, and diagnostic LEDs alert user when output voltage is ready for use or output voltage is too low. Depending on model, products are offered in metal or plastic housings from 22.5-83 mm wide and feature...
Read More »
Solid State Relays offer various cable securing methods.
Measuring 76 x 22.5 x 43 mm, RX Series ThyRex has base module that allows user to choose from screw terminals, spring terminals, or FAST-ons for securing cable. Thyristor-based power section is soldered using vacuum bonding technology and is externally protected by aluminum plate. As fully plug-in system, series is suited for solid state switching of AC loads up to 32 A at voltages to 480 Vac...
Read More »
Manual Motor Starters come in models rated to 100 A.
Equipped with IP20 finger safe terminals and trip test, GMS Series includes 3 frame sizes rated for up to 32, 63, and 100 A. All units are available with rotary switch, except 32 A version, which is available with rotary and rocker switch. Slide out handle provides method to lock manual motor starter in OFF position, and dial cover secures current trip setting. Able to be DIN rail or surface...
Read More »
Inductive Proximity Sensors have sensing range to 22 mm.
Offered in 2- and 3-wire versions, M12, M18, and M30 have 10-40 Vdc supply range and offer built-in reverse polarity, short-circuit, and transient voltage protection. Outputs are transistor types, with NPN and PNP versions available. Available with cable or M12 quick-disconnect plug, sensors have nickel-plated brass housings. Flush and non-flush mount sensing ranges for M12, M18, and M30 are 4...
Read More »
Modular Panel Meters have 3 color display.
Measuring 48 x 96 mm, UDM Series is comprised of TRMS modular instruments in 3.5-digit (UMD35) and 4-digit (UMD40) versions with scaling and filtering capabilities. Plug and play modules enable series to measure up to 5 A/500 V ac/dc, 20 Kohm, RTD, and thermocouple input. Features include cold junction compensation, excitation output, and time integration. Variable control and retransmission is...
Read More »
Three-Phase Solid State Relays have integral heat sink.
Offered in 2 housing styles, RJ Series Solitrons can switch 2 or 3 phases and feature LED indication of control input and optional over-temperature protection. They can be snapped onto DIN-rail or mounted to back chassis. Able to switch up to 32 A @ 600 Vac, products utilize direct copper bonding technology and have cage clamp terminals. They can replace electromechanical or mercury contactors in...
Read More »
Phase Monitoring Relay has compact housing.
Built with 17.5 mm DIN rail mount housing, DPA53 Series has user-selectable NC/NO relay output that detects under-voltage and improper phase sequence or phase loss. Product lets users know if all phases are present and have correct sequence and voltage. Red LED visually indicates alarm condition, and time delay option is built-in for relay activation. Voltage monitoring ranges are available for...
Read More »
Solid State Relay switches voltages/currents to 690 Vrms.
Packaged in 3-phase industrial housing, RZ3A Series electronically switches 3 poles up to 75 A (RMS) and can be driven by input currents from PLCs and temperature controllers. It uses zero-switching technology, regulated DC or AC control inputs, and direct copper bonding technology. Built-in over-temperature protection switches off load during abnormal operating conditions. Features include touch...
Read More »
Miniature Photoelectric Sensors feature teach mode setup.
Series PD32 is available in NPN or PNP transistor outputs, with 10-30 Vdc power supply, and operating speed of 1,000 Hz. Functions such as programming sensor to recognize objects, setting sensing range, and inverting output are accessed via single push button. Dynamic Teach Mode allows sensors to be programmed while application is running. Sensing ranges are 500 mm for diffuse, 2.5 m for...
Read More »