Carlo Gavazzi Inc.

DTA04 Motor Thermistor Relay offers reaction time of less than 500 ms.
Electrical Equipment & Systems

DTA04 Motor Thermistor Relay offers reaction time of less than 500 ms.

Used for protecting electric motors from overheating, Universal-Voltage DTA04 Motor Thermistor Relay can be configured as auto or manual reset mode. Featuring universal voltage input and multiple NEMA B300 relay outputs, unit is operated with 24 to 240V AC/DC. Unit comes witth 22.5mm wide DIN rail mount housing and multi-color alarm LED. Product meets UL 508, CSA C22.2 and EN 60255-6 standards.

Read More »
Industrial Electromechanical Plug-In Relays are integrated with diagnostic LED.
Electrical Equipment & Systems

Industrial Electromechanical Plug-In Relays are integrated with diagnostic LED.

 Available in RCI and RRM series, Plug-In Relays are equipped with DIN rail mountable sockets and metal hold down springs. Products come with push or twist option and an orange mechanical status indicator. Featuring coil voltages from 5-110 VDC and 12-240 VAC, both these relays offer max switching voltage of 250V and 1/3 HP motor rating and are UL recognized, CSA approved and CE marked. RCI...

Read More »
4-Wire Inductive Proximity Sensors come with built-in microcontroller.
Sensors, Monitors & Transducers

4-Wire Inductive Proximity Sensors come with built-in microcontroller.

4-Wire Complementary Output Inductive Proximity Sensors are offered in short or long barrel and flush or non-flush mounting options. Units are suitable for material handling, machine tool and packaging industry applications and are IP 67 rated. Products feature integrated diagnostics LED and meet UL 508 and IEC 60947-5-2 standards. Sensors come with M12 plug or 2 m pre-wired cable and offer...

Read More »
3-Phase Monitoring Relays feature built-in switch mode power supply.
Electrical Equipment & Systems

3-Phase Monitoring Relays feature built-in switch mode power supply.

3-Phase Monitoring Relays are offered in DPA52 and DPB52. Units are designed with multi-color LED indicators and relay contact output. Having an operating range from 125VLL to 624VLL with 45 to 65Hz frequency, units feature DIN rail housing with 17.5 mm width. Suitable for HVAC, lifts and escalators, material handling and water treatment applications, relays meet UL 508, CSA C22.2 and EN...

Read More »
Three Phase Monitoring Relays feature built-in switch mode power supply.
Electrical Equipment & Systems

Three Phase Monitoring Relays feature built-in switch mode power supply.

Three Phase Monitoring Relays are offered in DPA52 and DPB52 models. Offering critical protection against phase loss and improper phase sequence, these relays comes with multi-color LED indicators and relay contact output. Operated in 45 to 65Hz frequency and 125VLL to 624VLL voltage, units come in 17.5mm wide DIN rail mounting and meet UL 508, CSA C22.2 and EN 60947-5-1 standards. DPB52 relay...

Read More »
RSGD Series Soft Starter is equipped with integrated push button.
Electrical Equipment & Systems

RSGD Series Soft Starter is equipped with integrated push button.

RSGD Series Soft Starter is compatible with 3-phase induction AC motors. Unit offers operational current of 12 A up to 45 A, voltage from 220 VAC up to 600 VAC and horsepower rating up to 40 HP. Product comes with self-learning algorithm, two relay outputs and 24 VAC/VDC or 100-240VAC control voltage. Suitable for water treatment, agriculture, building automation and HVAC applications, soft...

Read More »
Photoelectric Sensors come with M8-4pin male connector.
Sensors, Monitors & Transducers

Photoelectric Sensors come with M8-4pin male connector.

Eliminating halo light disturbance for reliable detection, PD30CN Series Photoelectric Sensors come with background or polarized reflective versions with PointSpot beam. Enclosed in 10.8 x 20 x 30 mm standards housing style with two M3 mounting holes, sensors are operated with 10 – 30 VDC supply with NPN or PNP outputs. Meeting IP67, CE and cULus standards, unit’s sensing distance can be...

Read More »
WM20 Power Analyzer comes with 4 line LCD display.
Laboratory and Research Supplies and Equipment

WM20 Power Analyzer comes with 4 line LCD display.

Available in 4 versions for managing up to 600 VAC systems, WM20 Power Analyzer is used in applications from building automation to industrial automation. Designed with RS-485, TCP/IP, BACnet, RS-485, TCP/IP and Profibus protocols, unit provides ±0.2% RDG accuracy. Meeting cULus listed and CE standards, analyzer features optical port, optional digital output and communication modules. Product is...

Read More »
DTA04 Motor Thermistor Relay offers reaction time of less than 500 ms.
Electrical Equipment & Systems

DTA04 Motor Thermistor Relay offers reaction time of less than 500 ms.

Used for protecting electric motors from overheating, Universal-Voltage DTA04 Motor Thermistor Relay can be configured as auto or manual reset mode. Featuring universal voltage input and multiple NEMA B300 relay outputs, unit is operated with 24 to 240V AC/DC. Unit comes witth 22.5mm wide DIN rail mount housing and multi-color alarm LED. Product meets UL 508, CSA C22.2 and EN 60255-6 standards.

Read More »
Industrial Electromechanical Plug-In Relays are integrated with diagnostic LED.
Electrical Equipment & Systems

Industrial Electromechanical Plug-In Relays are integrated with diagnostic LED.

 Available in RCI and RRM series, Plug-In Relays are equipped with DIN rail mountable sockets and metal hold down springs. Products come with push or twist option and an orange mechanical status indicator. Featuring coil voltages from 5-110 VDC and 12-240 VAC, both these relays offer max switching voltage of 250V and 1/3 HP motor rating and are UL recognized, CSA approved and CE marked. RCI...

Read More »
4-Wire Inductive Proximity Sensors come with built-in microcontroller.
Sensors, Monitors & Transducers

4-Wire Inductive Proximity Sensors come with built-in microcontroller.

4-Wire Complementary Output Inductive Proximity Sensors are offered in short or long barrel and flush or non-flush mounting options. Units are suitable for material handling, machine tool and packaging industry applications and are IP 67 rated. Products feature integrated diagnostics LED and meet UL 508 and IEC 60947-5-2 standards. Sensors come with M12 plug or 2 m pre-wired cable and offer...

Read More »
3-Phase Monitoring Relays feature built-in switch mode power supply.
Electrical Equipment & Systems

3-Phase Monitoring Relays feature built-in switch mode power supply.

3-Phase Monitoring Relays are offered in DPA52 and DPB52. Units are designed with multi-color LED indicators and relay contact output. Having an operating range from 125VLL to 624VLL with 45 to 65Hz frequency, units feature DIN rail housing with 17.5 mm width. Suitable for HVAC, lifts and escalators, material handling and water treatment applications, relays meet UL 508, CSA C22.2 and EN...

Read More »
Three Phase Monitoring Relays feature built-in switch mode power supply.
Electrical Equipment & Systems

Three Phase Monitoring Relays feature built-in switch mode power supply.

Three Phase Monitoring Relays are offered in DPA52 and DPB52 models. Offering critical protection against phase loss and improper phase sequence, these relays comes with multi-color LED indicators and relay contact output. Operated in 45 to 65Hz frequency and 125VLL to 624VLL voltage, units come in 17.5mm wide DIN rail mounting and meet UL 508, CSA C22.2 and EN 60947-5-1 standards. DPB52 relay...

Read More »
RSGD Series Soft Starter is equipped with integrated push button.
Electrical Equipment & Systems

RSGD Series Soft Starter is equipped with integrated push button.

RSGD Series Soft Starter is compatible with 3-phase induction AC motors. Unit offers operational current of 12 A up to 45 A, voltage from 220 VAC up to 600 VAC and horsepower rating up to 40 HP. Product comes with self-learning algorithm, two relay outputs and 24 VAC/VDC or 100-240VAC control voltage. Suitable for water treatment, agriculture, building automation and HVAC applications, soft...

Read More »
Photoelectric Sensors come with M8-4pin male connector.
Sensors, Monitors & Transducers

Photoelectric Sensors come with M8-4pin male connector.

Eliminating halo light disturbance for reliable detection, PD30CN Series Photoelectric Sensors come with background or polarized reflective versions with PointSpot beam. Enclosed in 10.8 x 20 x 30 mm standards housing style with two M3 mounting holes, sensors are operated with 10 – 30 VDC supply with NPN or PNP outputs. Meeting IP67, CE and cULus standards, unit’s sensing distance can be...

Read More »
WM20 Power Analyzer comes with 4 line LCD display.
Laboratory and Research Supplies and Equipment

WM20 Power Analyzer comes with 4 line LCD display.

Available in 4 versions for managing up to 600 VAC systems, WM20 Power Analyzer is used in applications from building automation to industrial automation. Designed with RS-485, TCP/IP, BACnet, RS-485, TCP/IP and Profibus protocols, unit provides ±0.2% RDG accuracy. Meeting cULus listed and CE standards, analyzer features optical port, optional digital output and communication modules. Product is...

Read More »

All Topics