Maguire Products, Inc.
Aston, PA 19014
Share:
Maguire Syncro Extrusion Control System Increases Productivity and Reduces Material Cost
Consist of Maguire® WXB™ Weigh Extrusion Blender, Maguire 4088 controller and Syncro® controller. Available in pounds or kilograms per hour, weight per length of extrudate and product thickness in microns modes. Enables the blown film processor to maximize throughput while maintaining tight tolerances, or to reduce material consumption by down-gauging.
Read More »
Maguire Renames Its Unique Vacuum Resin Dryer "Ultra®" To Spotlight Drastically Lower Energy Consumption
Using Less Than a Tenth of the Energy Needed by a New Desiccant Dryer to Dry Resin, the ULTRA® Low Energy Dryer Saves Thousands of Dollars in Energy Costs per Year ASTON, PENNSYLVANIA, U.S.A., July 23, 2019: The world’s only vacuum resin dryer designed for plastics processors has a new brand name that reflects its proven capability to pay for itself through substantial savings in energy costs....
Read More »
New WXB Weigh Extrusion Blender Offers a Tolerance within -0.1% and +0.1%
WXB™ Weigh Extrusion Blender is available in WXB 100, WXB 200 and WXB 400 models for 100-220 lb/hr, 220-440 lb/hr and 440-880 lb/hr throughputs respectively. Unit comes with GIW weigh bin, LIW mix chamber and Maguire® 4088 controller. The Blender offers extrusion control depending on batch precision and metering accuracy. GIW weighs the batch ingredients whereas the LIW chamber makes accurate...
Read More »
Injection Stretch Blow Molding Toolmaker R&D / Leverage Finds Vacuum Drying Ideal for Trial and Other Short Runs
LPD™ Dryers from Maguire Have Substantially Cut Startup and Changeover Times, Reduced Energy Use, and Dried More Efficiently and Uniformly than Desiccant Dryers SUTTON IN ASHFIELD, NOTTINGHAMSHIRE, UK, May 15, 2018: R&D / Leverage™, a specialist in tooling for injection stretch blow molding of PET bottles, reports that a switch from desiccant dryers to vacuum dryers has solved multiple...
Read More »
Maguire® MMT™ Micro Tower delivers streamlining rate up to 100 lb. per hour.
Maguire® MMT™ Micro Tower Handling device designed for small-volume plastics processing combines loading, dosing, mixing, and dispensing functions. Unit can mix materials such as virgin resin, regrind and masterbatch in 10 lb. batches in extrusion processes or injection molding. Device is equipped with loader, three material hoppers and blower driven by brushless motor.
Read More »
Maguire® VBD-600 Dryer offers throughput up to 600 lb per hour.
Maguire® VBD-600 Vacuum Dryer is suitable for manufacture of sheet, large automotive parts, and many other extrusion and molding applications. Product consists of heating hopper, vacuum vessel and retention hopper and features controller display for monitoring energy consumption. Units come with high-speed gate valves with an accuracy of ±4 g per dispense and use gravity for material movement...
Read More »
VBD™ Vacuum Dryer provides a throughput of 300 lb per hr.
VBD™ Vacuum Dryer is embedded with software used for monitoring the changing conditions of dryer operation. With similar energy consumption as throughputs of only 25 lb. (11 kg) per hour, unit consumes 46 W/kg/hr when operated at full capacity. Unit’s software uses data from past heating cycles and makes adjustments to present cycles.
Read More »
VBD™ 300 Dryer comes with touchscreen cotroller.
Featuring heating hopper, vacuum vessel and retention / take-away hopper vessels, VBD™ Vacuum Resin 300 Dryer offers throughputs of up to 136 kg per hour. Enhancing control over the drying process with help of load cells, unit moves material through vertically arranged stages based on gravity. Dryers feature slide-gate valves between stages with an accuracy of ±4 grams of per dispense. Product...
Read More »Maguire Partners with Syncro to Expand Options for Advanced Extrusion Control Technologies
DÃ-œSSELDORF - At K 2016 today, Maguire Products, Inc. and SYNCRO srl announced a partnership to provide customers of both companies with an extensive platform of options for materials and extrusion control. Maguire has taken an investment position with SYNCRO that will lead to a portfolio of technologies drawing on Maguire’s experience in materials handling and blending systems, and...
Read More »
AS K-2016 Nears, Special "50k" Maguire® Blender Travels to Customers Worldwide to Celebrate Sale of 50,000th Blender
Celebration Also Includes the Chance to Win One of Five $500 Cash Prizes, Whose First Winner Is an Extrusion Operation of Amesbury Truth, a Leading North American Producer of Window and Door Components ASTON, PENNSYLVANIA, U.S.A. -Â- A year-long celebration in anticipation of the shipment of the 50,000th Maguire® weigh scale blender will arrive at K 2016, the biggest event in the...
Read More »
Maguire Syncro Extrusion Control System Increases Productivity and Reduces Material Cost
Consist of Maguire® WXB™ Weigh Extrusion Blender, Maguire 4088 controller and Syncro® controller. Available in pounds or kilograms per hour, weight per length of extrudate and product thickness in microns modes. Enables the blown film processor to maximize throughput while maintaining tight tolerances, or to reduce material consumption by down-gauging.
Read More »Maguire Taiwan Opens to Serve Important Taiwanese Market, Expanding the Global Network Supporting Maguire Customers
New Taiwanese Company Is Maguire’s Sixth International Subsidiary, Providing Sales, Technical Support, Stocks of Equipment and Parts, and a Fully Functioning Lab for Trials TAICHUNG CITY, TAIWAN, September 27, 2019: Maguire Products, Inc. has established Maguire Products Taiwan Co., Ltd. as a new subsidiary to serve the large and growing Taiwanese market for plastics auxiliary equipment. The...
Read More »
Maguire Renames Its Unique Vacuum Resin Dryer "Ultra®" To Spotlight Drastically Lower Energy Consumption
Using Less Than a Tenth of the Energy Needed by a New Desiccant Dryer to Dry Resin, the ULTRA® Low Energy Dryer Saves Thousands of Dollars in Energy Costs per Year ASTON, PENNSYLVANIA, U.S.A., July 23, 2019: The world’s only vacuum resin dryer designed for plastics processors has a new brand name that reflects its proven capability to pay for itself through substantial savings in energy costs....
Read More »
New WXB Weigh Extrusion Blender Offers a Tolerance within -0.1% and +0.1%
WXB™ Weigh Extrusion Blender is available in WXB 100, WXB 200 and WXB 400 models for 100-220 lb/hr, 220-440 lb/hr and 440-880 lb/hr throughputs respectively. Unit comes with GIW weigh bin, LIW mix chamber and Maguire® 4088 controller. The Blender offers extrusion control depending on batch precision and metering accuracy. GIW weighs the batch ingredients whereas the LIW chamber makes accurate...
Read More »
Injection Stretch Blow Molding Toolmaker R&D / Leverage Finds Vacuum Drying Ideal for Trial and Other Short Runs
LPD™ Dryers from Maguire Have Substantially Cut Startup and Changeover Times, Reduced Energy Use, and Dried More Efficiently and Uniformly than Desiccant Dryers SUTTON IN ASHFIELD, NOTTINGHAMSHIRE, UK, May 15, 2018: R&D / Leverage™, a specialist in tooling for injection stretch blow molding of PET bottles, reports that a switch from desiccant dryers to vacuum dryers has solved multiple...
Read More »New Dosing Technology for Injection Molding Ensures Uniform Color Without Pre-Mixing and Ends Over-Coloring
100% Injection Coloring™ Technology from Riverdale Global Meters Liquid or Pelletized Colorant during Both Injection and Recovery Phases ASTON, PA, U.S.A., March 5, 2018: A patent-pending color metering control system for injection molding ensures color uniformity and saves costs by dosing colorant during the injection phase, when conventional color and additive metering systems are inactive....
Read More »
Maguire® MMT™ Micro Tower delivers streamlining rate up to 100 lb. per hour.
Maguire® MMT™ Micro Tower Handling device designed for small-volume plastics processing combines loading, dosing, mixing, and dispensing functions. Unit can mix materials such as virgin resin, regrind and masterbatch in 10 lb. batches in extrusion processes or injection molding. Device is equipped with loader, three material hoppers and blower driven by brushless motor.
Read More »
Maguire® VBD-600 Dryer offers throughput up to 600 lb per hour.
Maguire® VBD-600 Vacuum Dryer is suitable for manufacture of sheet, large automotive parts, and many other extrusion and molding applications. Product consists of heating hopper, vacuum vessel and retention hopper and features controller display for monitoring energy consumption. Units come with high-speed gate valves with an accuracy of ±4 g per dispense and use gravity for material movement...
Read More »
VBD™ Vacuum Dryer provides a throughput of 300 lb per hr.
VBD™ Vacuum Dryer is embedded with software used for monitoring the changing conditions of dryer operation. With similar energy consumption as throughputs of only 25 lb. (11 kg) per hour, unit consumes 46 W/kg/hr when operated at full capacity. Unit’s software uses data from past heating cycles and makes adjustments to present cycles.
Read More »
VBD™ 300 Dryer comes with touchscreen cotroller.
Featuring heating hopper, vacuum vessel and retention / take-away hopper vessels, VBD™ Vacuum Resin 300 Dryer offers throughputs of up to 136 kg per hour. Enhancing control over the drying process with help of load cells, unit moves material through vertically arranged stages based on gravity. Dryers feature slide-gate valves between stages with an accuracy of ±4 grams of per dispense. Product...
Read More »
