CyberResearch, Inc.
Branford, CT 06405
Rack Mount Monitor adjusts brightness up to 1,000 nits.
Model MRA 15SA 15 in. TFT LCD monitor includes 8-level light sensor and circuits that adjust brightness to compensate for changing ambient light. NEMA 4 seal is provided between screen and aluminum front bezel. Connectors on rear panel include dc power input, analog VGA, DVI input, S-Video input, and composite video input. Optional analog-resistive touchscreen is available and includes RS-232...
Read More »
Portable Workstation has 250 nit, 17 in. LCD monitor.
Designed for in-field use, LPA 617 ATX PC workstation has impact-resistant ABS chassis supported by aluminum framework. It supports CPU speeds to 3.2 GHz and includes floppy drive, 40 Gb hard drive, CD-ROM drive, and two 5.25 in. bays. Most models have 5 PCI slots, and one combines 3 ISA with 4 PCI expansion slots. PentiumÃ-® 4 models have 460 W power supply, while CeleronÃ-® and...
Read More »
DAQ System collects data at rates to 130 Msample/s.
Equipped with on-board 512 Mb memory and 3 Kb FIFO buffer, PCIDAQ 02M130 2-channel A/D board collects 14-bit data at rates to 65 Msamples/sec on each channel or 130 Msamples/sec on one channel. Data pacing is set by internal 60 MHz clock or externally generated sine wave at frequencies from 500 Hz to 65 MHz. Signal-to-noise ratio is 66 dB @ Ã-
Read More »
Multi-Port KVM with 17 in. LCD mounts in 1U rack.
GFC 1716A FoldAway(TM) KVM lets users control up to 16 PCs from one workstation, eliminating need for 16 separate displays and keyboards. Measuring 1U high and 25.5 in. deep, it installs in standard EIA 19 in. industrial racks via thumbscrews that keep unit from sliding out accidentally. Unit's 250 nit TFT LCD display offers 1280 x 1024 SXGA resolution and 16 M colors with contrast ratio of...
Read More »
Panel PCs each include 1 PCI expansion slot.
Models STE 15 and STE 17 are 15 and 17 in. panel PCs with 250-nit LCD displays providing 1,024 x 768 and 1,280 x 1,024 resolution, respectively. STE 15 accommodates cards up to 5.75 in., while STE 17 accepts cards up to 10.84 in. long. Both offer PentiumÃ-® 4 power, two 2.5 in. drive bays, optional touchscreen, and NEMA 4 sealing. Network-ready communication and data ports include...
Read More »
Ethernet Switches are suited for dc environments.
DIN rail, wall, and piggyback mount 10/100Base-T Ethernet switches accept voltages from 10-30 Vdc, with surge protection to 3,000 Vdc. ADAM 6521 lets users interconnect 4 copper (RJ-45) and 1 fiber-optic (SC) networks, while ADAM 6520 provides 5 RJ-45 Ethernet ports. Both modules automatically sense 10 or 100 Mbps speeds and provide full and half-duplex flow control. Surge protected to 3,000 Vdc,...
Read More »
PCI Analog Output Boards have up to 8 feedback lines.
To enable automatic control, PCIAO 04F8 and PCIAO 08F4 facilitate direction of 14-bit feedback to D/A board via feedback lines that keep system stable. Former offers 4 D/A lines with 8 A/D feedback channels, while latter has 8 D/A's with 4 A/D feedback channels. Both boards have output speeds of 1 MSample/s and input speeds of 400 KSample/s. Products calibrate themselves on command with on-board...
Read More »
Fiber-Optic Converters send video signals up to 3,300 ft.
Both DVE 1000 video extenders and CLE 500 camera extenders use matched converters to switch between electronic and optical signals. DVE 1000 units allow monitors or projectors to be located up to 3,300 ft away from host computers, while CLE 500 models allows distances up to 1,640 ft from camera to computer. Transmitters and receivers are connected using CFSM simplex fiber-optic cables, while...
Read More »
Flat Panel PC has PCI slot and 8 digital I/O ports.
Suited for use in brightly lit areas, NEMA 4/12 SRD Panel PCs are powered by 1 GHz PentiumÃ-® III or 850 MHz CeleronÃ-® processor and feature 15 in. Sun-Bright 1,750 nit display. Products also provide 9.5 in. PCI expansion slot and network-ready I/O. Able to be swivel-arm or rack-mounted, PCs include 2 Ethernet LAN ports, one RS-232/422/485 and 3 RS-232 serial ports, 2 USB ports, 2...
Read More »
PCI Boards simplify general-purpose data acquisition.
Complete with 256-position A/D channel/gain queue, Models RCP 1612 and 3212 store up to 2,048 samples in on-board FIFO buffers. Three 8-bit digital I/O ports can be configured as inputs or outputs, and support hardware handshaking, strobe I/O, and bi-directional protocols. Each board includes six 16-bit counter/timers. Two are used internally; 4 are available to measure frequency, count events,...
Read More »