E-Switch
Brooklyn Park, MN 55428
Share:
Illuminated Square Pushbutton comes in metal die cast housing.
Available in multiple color options, RP8400 series is sealed to IP65 and has threaded panel mount design. Respective contact resistance (initial max) and insulation resistance (min at 500 Vdc) values are 50 mW and 1,000 MW. Offering life expectancy of 500,000 operating cycles at full load, switch has contact rating of 125 mA @ 125 Vac and 100 mA @ 50 Vdc; dielectric strength of 1,500 Vac RMS; and...
Read More »Illuminated Anti-Vandal Switch is water resistant.
Offered with ring and dot illumination options in red, yellow, orange, blue, green, or white, PV7 series has contact rating of 2 A, 48 Vdc and offers mechanical life of 1,000,000 cycles. Contact resistance is 50 mW initial max, insulation resistance is 1,000 MW min, and dielectric strength is 2,000 Vac. Operating at -20 to +70Ã-
Read More »Illuminated Pushbutton Switches feature right angle termination.
Featuring surface mount design, LP37 Series is available with red, green, and yellow LEDs. SPDT units feature full travel of 5.1 mm Ã-
Read More »Pushbutton Switch has electrical life of 50,000 cycles.
Available with blue, green, red, white, and yellow LED options, LP4 series is offered with multiple cap sizes/options along with vertical and right angle PCB mount termination options. Specifications include operating force of 250 Ã-
Read More »Illuminated Pushbutton Switch has multiple color options.
Available with blue, green, red, white, and yellow LED color options, round pushbuttons of LP1 series are panel-mount, momentary switches with rated electrical life of 50,000 cycles. They require 250 gf operating force (Ã-
Read More »Illuminated Pushbutton Switch features IP65 sealed design.
Available in threaded or snap-in panel mount configurations, Series RP8100 offers contact ratings of 125 mA at 125 Vac and 100 mA at 50 Vdc. Initial contact resistance is 5 mW, while insulation resistance is 1,000 MW at 500 Vdc, and dielectric strength is 1,000 Vac rms. Operating from -30 to +85Ã-
Read More »Tact Switch features ultra-miniature design.
Measuring 4.5 x 6.8 x 2 mm, Model TL3200 features dual LEDs with single or dual color options available in red, green, or yellow. Unit has contact rating of 50 mA at 12 Vdc, contact resistance of 500 mW, and dielectric strength of 250 Vac. Operating from -25 to +85Ã-
Read More »Illuminated Tactile Switch has right angle design.
Available in multiple LED colors, Model TL1260 has thru hole design with contact rating of 50 mA at 12 Vdc, contact resistance of 100 mW, and insulation resistance of 100 MW. It offers dielectric strength of 500 Vac, actuation force of 160 gf Ã-
Read More »Pushbutton Switches withstand outdoor applications.
Available in many different colors and illumination options, flush-mount LA Series features brushed aluminum bezel and is sealed to IP65 standards. RoHS-compliant units offer contact ratings of 5 A at 250 Vac, 5 A at 125 Vac, .2 A at 250 Vdc, and 6 A at 24 Vdc. Switches are available with incandescent, neon, or LED options and are suited for outdoor, industrial, medical, audio/visual, and gaming...
Read More »Surface Mount Tact Switch allows for PC board edge mounting.
Specified over -20 to +70-°C operating temperature range, TL3320 right-angle SMT tact switch features RoHS-compliant construction and has contact rating of 12 Vdc, 50 mA. Design allows PCB edge mounting and has rated mechanical life of 80,000 cycles. Markets and applications include consumer electronics, computers and peripherals, instrumentation, and telecommunications.
Read More »Illuminated Square Pushbutton comes in metal die cast housing.
Available in multiple color options, RP8400 series is sealed to IP65 and has threaded panel mount design. Respective contact resistance (initial max) and insulation resistance (min at 500 Vdc) values are 50 mW and 1,000 MW. Offering life expectancy of 500,000 operating cycles at full load, switch has contact rating of 125 mA @ 125 Vac and 100 mA @ 50 Vdc; dielectric strength of 1,500 Vac RMS; and...
Read More »Illuminated Anti-Vandal Switch is water resistant.
Offered with ring and dot illumination options in red, yellow, orange, blue, green, or white, PV7 series has contact rating of 2 A, 48 Vdc and offers mechanical life of 1,000,000 cycles. Contact resistance is 50 mW initial max, insulation resistance is 1,000 MW min, and dielectric strength is 2,000 Vac. Operating at -20 to +70Ã-
Read More »Illuminated Pushbutton Switches feature right angle termination.
Featuring surface mount design, LP37 Series is available with red, green, and yellow LEDs. SPDT units feature full travel of 5.1 mm Ã-
Read More »Pushbutton Switch has electrical life of 50,000 cycles.
Available with blue, green, red, white, and yellow LED options, LP4 series is offered with multiple cap sizes/options along with vertical and right angle PCB mount termination options. Specifications include operating force of 250 Ã-
Read More »E-Switch Announces Acquisition of Lamb Industries
MINNEAPOLIS, MN, February 20, 2009 - Stein Industries Inc, the parent company of E-Switch, Inc., announced today the acquisition of Lamb Industries. E-Switch is a leading global provider of electromechanical switch products including toggle, tact, pushbutton, rocker, snap-action, slide, dip and many illuminated product styles. The E-Switch and Lamb combination will present customers an expanded...
Read More »Illuminated Pushbutton Switch has multiple color options.
Available with blue, green, red, white, and yellow LED color options, round pushbuttons of LP1 series are panel-mount, momentary switches with rated electrical life of 50,000 cycles. They require 250 gf operating force (Ã-
Read More »Illuminated Pushbutton Switch features IP65 sealed design.
Available in threaded or snap-in panel mount configurations, Series RP8100 offers contact ratings of 125 mA at 125 Vac and 100 mA at 50 Vdc. Initial contact resistance is 5 mW, while insulation resistance is 1,000 MW at 500 Vdc, and dielectric strength is 1,000 Vac rms. Operating from -30 to +85Ã-
Read More »E-Switch, Inc. Signs Astron Electronics, Inc. to Represent Them in Southern California
Del Mar, Calif. and Brooklyn Park, Minn. -- May 2, 2007 - E-Switch, a leading supplier of switches for the OEM market, today announced commencement of Astron Electronics Inc, as the Company's exclusive Manufacturer's Rep for the Southern California and northern Baja sales region. E-Switch is very excited to have new representation in the Southern California market. Partnering with Astron will...
Read More »Tact Switch features ultra-miniature design.
Measuring 4.5 x 6.8 x 2 mm, Model TL3200 features dual LEDs with single or dual color options available in red, green, or yellow. Unit has contact rating of 50 mA at 12 Vdc, contact resistance of 500 mW, and dielectric strength of 250 Vac. Operating from -25 to +85Ã-
Read More »Illuminated Tactile Switch has right angle design.
Available in multiple LED colors, Model TL1260 has thru hole design with contact rating of 50 mA at 12 Vdc, contact resistance of 100 mW, and insulation resistance of 100 MW. It offers dielectric strength of 500 Vac, actuation force of 160 gf Ã-
Read More »