FCI Electronics
Etters, PA 17319
Share:
Shield-Less Cable Assembly delivers data rates up to 10 Gbps.
Supporting Infiniband QDR data rate, AirMax VSÃ-® internal cable assembly utilizes shield-less connector design. Right-angle and vertical mating board headers with passive latch retention suit internal high-density cabling for high-speed signaling. Optimized air dielectric between adjacent conductors simplifies grounding structure, and 26 AWG internal cables are constructed usingÃ- 4...
Read More »FCI and Amphenol Announce Second Source Agreement for InfinX-® High-Speed Mezzanine Connectors
ETTERS, PA. - FCI, a leading supplier of high-speed, high-density connectors and interconnect systems, and Amphenol have entered into a second source agreement covering the InfinXÃ-® high speed mezzanine connector family. The licensing agreement, based on the sharing of innovative patented high speed mezzanine connector and BGA connector termination technologies, leverages the respective and...
Read More »
D-Sub Connectors expand reflow process compatibility.
Suited for daughter boards in industrial applications, right-angle Delta D-sub connectors feature Pin-In-Paste through-hole technology, and are offered in 9-, 15-, and 25-way versions in 6.3 mm standoff US and 7.2 mm standoff Europe standards. They facilitate movement from solder-to-board or press-fit processes as no board layout redesign is needed. Specific weight balance ensures connector stays...
Read More »
Shrouded Pin Headers promote reliable SMT connections.
Suited for cable-to-board applications, QuickieÃ-® Shrouded Pin Headers are designed for lead-free pin-in-paste (PiP) soldering, which allows through-mount connectors to be attached using SMT soldering processes. Header body employs high-temperature thermoplastic, and housing design is adapted to optimize flow of solder paste. Headers feature 4-wall shroud and mate with Quickie IDC...
Read More »H-Tap Covers feature transparent design.
Clear H-Tap covers, made of polycarbonate, provide flame-retardant solutions that allow for connector inspection during and after installation. UL-listed, CSA-certified products employ 2-piece design, positive latching system and feature flexible fingers that wrap around conductor to hold cover in place. While built-in magnifying glass promotes connector visibility, markings verify correctly...
Read More »FCI Licenses AirMax VS-® 2- and 3-pair Connectors to Amphenol TCS
ETTERS, PA (September 27, 2006) - FCI, a leading manufacturer of connectors and interconnect systems, announced that Amphenol TCS has signed a second-source license agreement for the AirMax VSÃ-® 2-pair and 3-pair connector products, in addition to the AirMax VS 4- and 5-pair licenses it already holds. With today's announcement, Amphenol TCS has second-source rights for the global...
Read More »
Connector Systems have 2.00 mm pitch and 0.1 mm coplanarity.
With maximum current rating of 2 A per contact, Minitek(TM) 2.00 mm pitch modular connector systems include PCB receptacles, slim-line and shrouded headers, crimp-to-wire housings and terminals, unshrouded headers, and IDC receptacles. They are available in surface-mount and through-hole double-row versions in either straight or right angle orientation from 4-50 positions.
Read More »
FCI's AirMax VS-® Connector System Conforms to Storage Bridge Bay Standard
ETTERS, PA (September 25, 2006) - FCI, a leading developer of connectors and interconnect systems, announced that the AirMax VSÃ-® 3-pair backplane connector system meets the mid-plane connector interface requirements defined in the recently-announced Storage Bridge Bay (SBB) specification. Leading companies in the data storage industry collaborated in the Storage Bridge Bay Working Group...
Read More »
I/O Connectors target USB+Power applications.
Eliminating need for independent power supply on peripheral devices, Latch-n-Lok(TM) System for USB+Power combines standard USB contacts with other power contacts to provide additional 5 A of current-carrying capacity beyond standard 1 A from traditional USB. Available with varying color and mechanical keying to denote voltage levels of 5, 12, and 24 V, shielded, latching I/O connectors are...
Read More »
D-Subminiature Connectors are reflow process-compatible.
Pin-in-paste Delta D Series connectors with through-hole technology are suitable for applications such as daughter boards where only few components require wave soldering or press-fit. Available in straight version with 9-50 positions, RoHS-compliant connectors are offered in number of packages compatible with processes including manual positioning, automatic pick-and-place with vacuum nozzle, or...
Read More »
Shield-Less Cable Assembly delivers data rates up to 10 Gbps.
Supporting Infiniband QDR data rate, AirMax VSÃ-® internal cable assembly utilizes shield-less connector design. Right-angle and vertical mating board headers with passive latch retention suit internal high-density cabling for high-speed signaling. Optimized air dielectric between adjacent conductors simplifies grounding structure, and 26 AWG internal cables are constructed usingÃ- 4...
Read More »FCI and Amphenol Announce Second Source Agreement for InfinX-® High-Speed Mezzanine Connectors
ETTERS, PA. - FCI, a leading supplier of high-speed, high-density connectors and interconnect systems, and Amphenol have entered into a second source agreement covering the InfinXÃ-® high speed mezzanine connector family. The licensing agreement, based on the sharing of innovative patented high speed mezzanine connector and BGA connector termination technologies, leverages the respective and...
Read More »FCI Expands Design-In Support with 25+ CAD Formats Online
ETTERS, PA (January 17, 2012) -- FCI, a leading developer of connectors and interconnect systems, has announced that its website, www.fciconnect.com, now provides 3D downloadable models and a 3D viewer to reduce engineers' design time and improve the quality of technical information available to the engineering community. FCI's goal is to provide visitors with any technical information they may...
Read More »FCI Introduces New Basics+ Design Service
ETTERS, PA. (January 16, 2008) - FCI, a leading supplier of connectors and interconnect systems, in their continuing efforts to expand the service level of their Basics+ program, is now pleased to announce the launch of the Basics+ Design Service. The Basics+ design program enables customers to easily choose the standard board/wire/cable-to-board connection for their application. Many...
Read More »
D-Sub Connectors expand reflow process compatibility.
Suited for daughter boards in industrial applications, right-angle Delta D-sub connectors feature Pin-In-Paste through-hole technology, and are offered in 9-, 15-, and 25-way versions in 6.3 mm standoff US and 7.2 mm standoff Europe standards. They facilitate movement from solder-to-board or press-fit processes as no board layout redesign is needed. Specific weight balance ensures connector stays...
Read More »
Shrouded Pin Headers promote reliable SMT connections.
Suited for cable-to-board applications, QuickieÃ-® Shrouded Pin Headers are designed for lead-free pin-in-paste (PiP) soldering, which allows through-mount connectors to be attached using SMT soldering processes. Header body employs high-temperature thermoplastic, and housing design is adapted to optimize flow of solder paste. Headers feature 4-wall shroud and mate with Quickie IDC...
Read More »H-Tap Covers feature transparent design.
Clear H-Tap covers, made of polycarbonate, provide flame-retardant solutions that allow for connector inspection during and after installation. UL-listed, CSA-certified products employ 2-piece design, positive latching system and feature flexible fingers that wrap around conductor to hold cover in place. While built-in magnifying glass promotes connector visibility, markings verify correctly...
Read More »FCI Launches Global FCI Basics+-® Program
MUNICH, GERMANY (November 14, 2006) - FCI, a leading developer of connectors and interconnect systems, announced today at Electronica 2006 that it is expanding its popular FCI Basics+Ã-® program to reach its global market. The FCI Basics+ program offers outstanding service on industry-standard connectors and has long been popular with customers looking for convenient solutions for...
Read More »FCI Licenses AirMax VS-® 2- and 3-pair Connectors to Amphenol TCS
ETTERS, PA (September 27, 2006) - FCI, a leading manufacturer of connectors and interconnect systems, announced that Amphenol TCS has signed a second-source license agreement for the AirMax VSÃ-® 2-pair and 3-pair connector products, in addition to the AirMax VS 4- and 5-pair licenses it already holds. With today's announcement, Amphenol TCS has second-source rights for the global...
Read More »
Connector Systems have 2.00 mm pitch and 0.1 mm coplanarity.
With maximum current rating of 2 A per contact, Minitek(TM) 2.00 mm pitch modular connector systems include PCB receptacles, slim-line and shrouded headers, crimp-to-wire housings and terminals, unshrouded headers, and IDC receptacles. They are available in surface-mount and through-hole double-row versions in either straight or right angle orientation from 4-50 positions.
Read More »