ABB Metals Systems
New Berlin, WI 53151 2840
Share:
AC Drive features keypad with cell phone-like familiarity.
DriveIT ACS550 Low Voltage AC Drive features intuitive keypad with start and stop keys, parameter set keys, HELP button, and 2 soft keys. Built-in Start-up Assistant software facilitates start up and tuning of drives. PID Assistant prompts user through 12 questions and uses answers to set 26 parameters inside drive's program. Real-time clock logs date and time of faults, and Parameter Copy...
Read More »AC Micro Drive replaces soft starters and n-speed motors.
Rated from .25-1 hp, Model ACS50 Component Drive is suited for 100-120 Vac or 200-240 Vac single-phase systems. Users interface with unit via 3 control potentiometers and 8 DIP switches located on front panel. DIP switches enable user to set noise control to standard or silent, while auto reset can be either on or off. Acceleration/deceleration time may be varied between 0.1-30 seconds. Offered...
Read More »DC/AC Inverter Modules provide compact flexibility.
Rectifier and DC-supplied inverter modules extend all features and benefits of ABB industrial drive ACS800 across 1-2,250 hp range, from 380-600 Vac. Modular configuration utilizes common DC bus line-up, which enables users to wire input power via one 3-phase AC connection, with each DC-fed inverter unit sharing bus and providing output power to motor. Multidrives offer common braking feature,...
Read More »Variable Speed Drive features swinging choke technology.
Model ACS550 precisely controls motor speed to reflect actual demand, eliminating waste caused by fixed-speed operation. Swinging Choke reduces harmonics at both full and partial loads. Standard Start-Up Assistant software guides user through set-up procedures, while Maintenance Assistant signals when it is time for routine maintenance. Diagnostic Assistant provides suggestions for correcting...
Read More »
Drive facilitates installation, set-up, and use.
Series ACH550 DriveIT Low Voltage AC Drive features Start-up Assistant software for guided start-up. Drive provides 1-500 hp and multiple modes of motor control for HVAC applications. Built-in, real-time clock logs actual date and time of faults, and Diagnostic Assistant suggests ways to fix faults. Other features include audible noise optimization, PID assistant, controlled cooling fan, EMI/RFI...
Read More »Low-Voltage AC Drive Series is offered in 1-550 hp range.
Available in NEMA 1 or NEMA 12 enclosures with supply voltages from 208-480 V, ACS550 DriveIT family provides multiple modes of motor control and monitors energy consumption, running hours, or motor revolutions. Control panel features 2 soft keys, HELP button, and real-time clock. Features include Start-up Assistant software; ability to copy, download, and back-up parameters; and EMI/RFI...
Read More »
Regenerative AC Drive eliminates harmonic distortion.
ACS DriveIT Low Voltage 800-17 regenerative, 4-quadrant motor drive can run at full power in 80% brownout conditions. It regulates power factor to near unity, regardless of speed or load or AC line conditions. Direct Torque Control removes low-range frequencies up to 1 kHz and compensates for voltage variations, while LCL filtering handles medium and high frequencies. Available from 75-1,250 hp,...
Read More »
Miniature Circuit Breakers suit applications to 240 Vac.
Series S280U Pro M miniature circuit breakers offer branch circuit protection, DIN rail mounting, and current limitation. Available in 1-, 2-, or 3-pole models, UL489 Listed compact molded case circuit breakers are ring-tongue terminal compatible. Suited for use as branch circuit protective devices for circuits feeding resistive or inductive loads, units suit applications up to 240 Vac, 14 kAIC...
Read More »
Ethernet Module connects drives to Internet.
NETA-01 Ethernet Module works with any ABB drive that provides fiber optic link, communicating via standard web browser. It enables remote monitoring, configuration, diagnostics, and, when needed, control. Via link, drive can provide process-related information, such as load level, run time, energy consumption, and I/O data. Intelligent module has embedded server with all necessary software for...
Read More »
Three Phase Voltage Monitor comes in 2 x 2 in. package.
Offered in surface-mount package, TVW Series/The Net(TM) continuously measures voltage from each of three phases. Unit uses microcomputer circuit design that senses undervoltage, overvoltage, voltage unbalance, phase loss, and phase reversal. TVW trip delay, factory fixed from 0.2-100 sec, prevents nuisance tripping, while restart delay, factory fixed from 0.4 sec to 999 min, prevents short...
Read More »AC Drive features keypad with cell phone-like familiarity.
DriveIT ACS550 Low Voltage AC Drive features intuitive keypad with start and stop keys, parameter set keys, HELP button, and 2 soft keys. Built-in Start-up Assistant software facilitates start up and tuning of drives. PID Assistant prompts user through 12 questions and uses answers to set 26 parameters inside drive's program. Real-time clock logs date and time of faults, and Parameter Copy...
Read More »AC Micro Drive replaces soft starters and n-speed motors.
Rated from .25-1 hp, Model ACS50 Component Drive is suited for 100-120 Vac or 200-240 Vac single-phase systems. Users interface with unit via 3 control potentiometers and 8 DIP switches located on front panel. DIP switches enable user to set noise control to standard or silent, while auto reset can be either on or off. Acceleration/deceleration time may be varied between 0.1-30 seconds. Offered...
Read More »DC/AC Inverter Modules provide compact flexibility.
Rectifier and DC-supplied inverter modules extend all features and benefits of ABB industrial drive ACS800 across 1-2,250 hp range, from 380-600 Vac. Modular configuration utilizes common DC bus line-up, which enables users to wire input power via one 3-phase AC connection, with each DC-fed inverter unit sharing bus and providing output power to motor. Multidrives offer common braking feature,...
Read More »Variable Speed Drive features swinging choke technology.
Model ACS550 precisely controls motor speed to reflect actual demand, eliminating waste caused by fixed-speed operation. Swinging Choke reduces harmonics at both full and partial loads. Standard Start-Up Assistant software guides user through set-up procedures, while Maintenance Assistant signals when it is time for routine maintenance. Diagnostic Assistant provides suggestions for correcting...
Read More »
Drive facilitates installation, set-up, and use.
Series ACH550 DriveIT Low Voltage AC Drive features Start-up Assistant software for guided start-up. Drive provides 1-500 hp and multiple modes of motor control for HVAC applications. Built-in, real-time clock logs actual date and time of faults, and Diagnostic Assistant suggests ways to fix faults. Other features include audible noise optimization, PID assistant, controlled cooling fan, EMI/RFI...
Read More »Low-Voltage AC Drive Series is offered in 1-550 hp range.
Available in NEMA 1 or NEMA 12 enclosures with supply voltages from 208-480 V, ACS550 DriveIT family provides multiple modes of motor control and monitors energy consumption, running hours, or motor revolutions. Control panel features 2 soft keys, HELP button, and real-time clock. Features include Start-up Assistant software; ability to copy, download, and back-up parameters; and EMI/RFI...
Read More »
Regenerative AC Drive eliminates harmonic distortion.
ACS DriveIT Low Voltage 800-17 regenerative, 4-quadrant motor drive can run at full power in 80% brownout conditions. It regulates power factor to near unity, regardless of speed or load or AC line conditions. Direct Torque Control removes low-range frequencies up to 1 kHz and compensates for voltage variations, while LCL filtering handles medium and high frequencies. Available from 75-1,250 hp,...
Read More »
Miniature Circuit Breakers suit applications to 240 Vac.
Series S280U Pro M miniature circuit breakers offer branch circuit protection, DIN rail mounting, and current limitation. Available in 1-, 2-, or 3-pole models, UL489 Listed compact molded case circuit breakers are ring-tongue terminal compatible. Suited for use as branch circuit protective devices for circuits feeding resistive or inductive loads, units suit applications up to 240 Vac, 14 kAIC...
Read More »
Ethernet Module connects drives to Internet.
NETA-01 Ethernet Module works with any ABB drive that provides fiber optic link, communicating via standard web browser. It enables remote monitoring, configuration, diagnostics, and, when needed, control. Via link, drive can provide process-related information, such as load level, run time, energy consumption, and I/O data. Intelligent module has embedded server with all necessary software for...
Read More »
Three Phase Voltage Monitor comes in 2 x 2 in. package.
Offered in surface-mount package, TVW Series/The Net(TM) continuously measures voltage from each of three phases. Unit uses microcomputer circuit design that senses undervoltage, overvoltage, voltage unbalance, phase loss, and phase reversal. TVW trip delay, factory fixed from 0.2-100 sec, prevents nuisance tripping, while restart delay, factory fixed from 0.4 sec to 999 min, prevents short...
Read More »