Cablecraft Motion Controls
New Haven, IN 46774
Cablecraft Helps Develop Unique Solution for Use in New MRI System
Cablecraft Motion Controls was contacted by a large MRI machine manufacturer in search of development assistance for a number of special cables. These cables would be used as components on a new Patient Transporter (TP), Dock and Sliding Bed Top (BT) that would connect seamlessly with the new MRI system. Conventional MRI systems are very expensive bulky and often require special...
Read More »
CableCraft Offers Hot-Race Rod Ends and Linkages with Stainless Steel Components
Offered in HPF and HPM series models. Feature high temperature race materials that are designed for vibration resistance and self-lubrication. Designed for applications such as variable turbine geometry/ wastegate turbochargers and exhaust gas recirculation applications.
Read More »
Rod End and Spherical Bearings suit aerospace applications.
Self-lubricating and PTFE-lined, rod end bearings and spherical bearings operate within -65 to +325-
Read More »
Control Cables target marine applications.
Offering true 4 in. minimum bend radius, Cablecraft Push-Pull Blue Max(TM) Control Cables are lubricatd for life and have binder wired, PTFE core conduit. Outer jacket is resistant to abrasion, gasoline, diesel, and various corrosive chemicals. Suited for short runs as well as long runs with complicated routing, cables are intended for marine throttle controls, marine trim controls, marine fuel...
Read More »
Suspended Foot Pedals feature electronic management systems.
Offered in 3 models, TCS Series features non-contact angular displacement sensor that can be incorporated into virtually any type of vehicle. Sensor is available in wide range of signal outputs and is compatible with most electronic engine management systems. Typical applications for pedals include trucks and buses as well as construction, farm, and material handling equipment.
Read More »
Electronic Controllers integrate into variety of vehicles.
Featuring non-contact sensor design, TCH Series industrial hand controls are suitable for any application that uses conventional contact potentiometer hand controller. Units can control electric vehicles and electro-hydraulic systems, as well as internal combustion engines in non-vehicle applications, especially in harsh environment where normal sensors are unsuitable.
Read More »
Electronic Foot Pedals suit diesel and gas-powered vehicles.
Floor-mounted TCF Series features non-contact angular displacement sensor, which is available with wide range of signal outputs and is compatible with most electronic engine management systems. Typical applications include trucks and buses as well as construction, farm, and material handling equipment. Pedal assemblies can be designed to meet specific customer requirements.
Read More »
Rod Ends allow for breakaway torque control.
With ball and body constructed of stainless steel, SSPM/SSPF Series features injection-molded, reinforced nylon race design and self-lubricating characteristics. They suit motion transfer applications requiring corrosion resistance, low friction, low moisture absorption, high wear resistance, and/or wide operating temperature ranges. Operating in temperatures from -30 to +220-
Read More »Cablecraft Helps Develop Unique Solution for Use in New MRI System
Cablecraft Motion Controls was contacted by a large MRI machine manufacturer in search of development assistance for a number of special cables. These cables would be used as components on a new Patient Transporter (TP), Dock and Sliding Bed Top (BT) that would connect seamlessly with the new MRI system. Conventional MRI systems are very expensive bulky and often require special...
Read More »Unique Cablecraft Engineering Solution
Cablecraft Motion Controls was contacted by a large exhaust gas management system supplier to develop a special actuator linkage to control a diverter valve in the exhaust gas stream of hybrid vehicles. The application presented quite a number of challenges. The linkage will be exposed to high temperatures, high vibration and a dirty environment. Also, given the high-volume nature of these hybrid...
Read More »
CableCraft Offers Hot-Race Rod Ends and Linkages with Stainless Steel Components
Offered in HPF and HPM series models. Feature high temperature race materials that are designed for vibration resistance and self-lubrication. Designed for applications such as variable turbine geometry/ wastegate turbochargers and exhaust gas recirculation applications.
Read More »Tuthill Controls Group is Now Cablecraft Motion Controls
Tuthill Controls Group has new owners and is now structured as Cablecraft Motion Controls. Headquartered in New Haven, IN, the new company draws on the histories of several former entities such as, JJ Tourek, Superior Linkage, National Rod Ends and Cablecraft-®. Facilities are also located in Tacoma, WA, St. Matthews, SC and Hailsham, England. Cablecraft Motion Controls provides both mechanical...
Read More »Tuthill Controls Attending ICUEE 2009
Tuthill Controls will be attending the International Construction and Utility Equipment Exposition (ICUEE) at the Kentucky Fair & Exposition Center in Louisville, KY in Booth No. 449 from October 6-8, 2009. Tuthill Controls provides mechanical controls to OEM markets including construction equipment, farm equipment, industrial machinery, military, lawn and garden, aviation, performance racing,...
Read More »Tuthill Controls Offers New Blue Max Literature Sheet
A new literature sheet featuring the high performance Push-Pull Blue Max(TM) control cable series is now available from Tuthill Controls. The new literature offers complete product details including common marine and racing applications, features, product materials and suggested end fittings. A high performance cable ordering code chart is also included. Blue Max control cables are excellent for...
Read More »
Rod End and Spherical Bearings suit aerospace applications.
Self-lubricating and PTFE-lined, rod end bearings and spherical bearings operate within -65 to +325-
Read More »
Control Cables target marine applications.
Offering true 4 in. minimum bend radius, Cablecraft Push-Pull Blue Max(TM) Control Cables are lubricatd for life and have binder wired, PTFE core conduit. Outer jacket is resistant to abrasion, gasoline, diesel, and various corrosive chemicals. Suited for short runs as well as long runs with complicated routing, cables are intended for marine throttle controls, marine trim controls, marine fuel...
Read More »
Suspended Foot Pedals feature electronic management systems.
Offered in 3 models, TCS Series features non-contact angular displacement sensor that can be incorporated into virtually any type of vehicle. Sensor is available in wide range of signal outputs and is compatible with most electronic engine management systems. Typical applications for pedals include trucks and buses as well as construction, farm, and material handling equipment.
Read More »New Electronic Controls Literature Available From Tuthill Controls
New Haven, IN - Tuthill Controls Group now offers sixteen new literature sheets featuring various models of their new electronic controls. The literature sheets provide information for a non-contact joystick, two hand controller models, eight models of floor mounted pedals, three suspended pedals and two non-contact sensor rotary position control systems. Each sheet gives a detailed description...
Read More »