Techno-Sommer Automatic
New Hyde Park, NY 11042
Share:
Parallel Grip and Rotate Modules offer 350 N of grip force.
With up to 4 mm stroke/jaw, and 0.5 Nm of torque for rotation, DGP404 Series of parallel grip and rotate modules are designed for high-load automation applications that require parts to be sorted and rotated 90 or 180Ã-
Read More »Mini-Parallel Grippers suit space-restricted applications.
Used in electronic and packing applications, MGP800 Series uses hardened steel flat guide to ensure optimal force and moment resistance. Magnetic sensors can be mounted to sense jaw position, allowing for positive feedback. Manifolding through bottom mounting surface eliminates need for air fittings and allows grippers to be mounted in close array. Series comes in 5 sizes, from 12 x 10 x 20 mm to...
Read More »Angular Grippers feature fully sealed design.
Offering adjustable stroke and gripping force up to 2,700 N, GG Series Grippers are sealed against dust, dirt, and coolant, allowing use in machining and grinding environments and wet or dirty applications. Units feature up to 35Ã-
Read More »Angled Swivel Units rotate 180-
Designed for loading and unloading machine tools, multiple grippers, and transfer lines, Models SW50D4, SW74D4, SW100D4, SW155D4, and SW195D4 have pivoting transfer plate that rotates 180Ã-
Read More »Toggle Tongs Grippers offer closing force up to 4,200 Ncm.
Designed to hold, squeeze, or cut wires, cables, and chains, Series ZK features hard-coated aluminum housing and chrome-plated hardened steel working parts. Model ZK22 cuts up to 3.5 mm OD copper wire, while Model ZK33 cuts up to 6 mm wire. With gripper in closed position, toggle is extended and guarantees mechanical self-locking. Two pins mounted on jaws can be used with optional mounting blocks...
Read More »Dual Action Gripper facilitates O-ring assembly.
Providing up to 1,450 N force, 6-finger GS Series picks up O-rings, expands them to slip over shaft, then ejects them into groove machined into shaft. Operating from 58-145 psi air pressure, 2 pistons that are pneumatically driven independently of each other actuate gripper motions. Standard pin sizes handle O-rings ranging from 4-60 mm diameter. Optional sensing can be accomplished with 2...
Read More »Rotary Jaw Grippers are designed to rotate parts.
To shorten production cycle times, SB Series includes 8 rotating jaws for parallel grippers that have ability to grip and turn parts simultaneously. Sizes range from models capable of handling hypodermic needles to those designed to pick-up and rotate heavy parts such as complete automotive engine blocks. While 3 models use synchronous belt drives, 5 models are geartrain-driven. Torques range...
Read More »Sealed Parallel Gripper features stable 4-sided guides.
Dual-jaw, sealed parallel grippers in GP1800 Series have flat sided jaws and rounded corners sealed against dirt, fluids, and dust. Along with fully sealed guides, products have 4-sided, rectangular shape and are available with multiple sets of air connections and mounting holes. Strokes are available from 3-30 mm, and gripping forces range from 10.5-979 lbf. Grippers are suited for machining...
Read More »Compact Rotary Actuators feature 4-position step rotors.
Automatic models SH-5 and SH-20 can rotate in 4 adjustable steps via 4 air inlets. Weighing 0.521 kg, model SH-5 features rotational angles up to 390Ã-
Read More »Parallel Grip and Rotate Modules offer 350 N of grip force.
With up to 4 mm stroke/jaw, and 0.5 Nm of torque for rotation, DGP404 Series of parallel grip and rotate modules are designed for high-load automation applications that require parts to be sorted and rotated 90 or 180Ã-
Read More »Mini-Parallel Grippers suit space-restricted applications.
Used in electronic and packing applications, MGP800 Series uses hardened steel flat guide to ensure optimal force and moment resistance. Magnetic sensors can be mounted to sense jaw position, allowing for positive feedback. Manifolding through bottom mounting surface eliminates need for air fittings and allows grippers to be mounted in close array. Series comes in 5 sizes, from 12 x 10 x 20 mm to...
Read More »Angular Grippers feature fully sealed design.
Offering adjustable stroke and gripping force up to 2,700 N, GG Series Grippers are sealed against dust, dirt, and coolant, allowing use in machining and grinding environments and wet or dirty applications. Units feature up to 35Ã-
Read More »Angled Swivel Units rotate 180-
Designed for loading and unloading machine tools, multiple grippers, and transfer lines, Models SW50D4, SW74D4, SW100D4, SW155D4, and SW195D4 have pivoting transfer plate that rotates 180Ã-
Read More »Toggle Tongs Grippers offer closing force up to 4,200 Ncm.
Designed to hold, squeeze, or cut wires, cables, and chains, Series ZK features hard-coated aluminum housing and chrome-plated hardened steel working parts. Model ZK22 cuts up to 3.5 mm OD copper wire, while Model ZK33 cuts up to 6 mm wire. With gripper in closed position, toggle is extended and guarantees mechanical self-locking. Two pins mounted on jaws can be used with optional mounting blocks...
Read More »Dual Action Gripper facilitates O-ring assembly.
Providing up to 1,450 N force, 6-finger GS Series picks up O-rings, expands them to slip over shaft, then ejects them into groove machined into shaft. Operating from 58-145 psi air pressure, 2 pistons that are pneumatically driven independently of each other actuate gripper motions. Standard pin sizes handle O-rings ranging from 4-60 mm diameter. Optional sensing can be accomplished with 2...
Read More »Rotary Jaw Grippers are designed to rotate parts.
To shorten production cycle times, SB Series includes 8 rotating jaws for parallel grippers that have ability to grip and turn parts simultaneously. Sizes range from models capable of handling hypodermic needles to those designed to pick-up and rotate heavy parts such as complete automotive engine blocks. While 3 models use synchronous belt drives, 5 models are geartrain-driven. Torques range...
Read More »Sealed Parallel Gripper features stable 4-sided guides.
Dual-jaw, sealed parallel grippers in GP1800 Series have flat sided jaws and rounded corners sealed against dirt, fluids, and dust. Along with fully sealed guides, products have 4-sided, rectangular shape and are available with multiple sets of air connections and mounting holes. Strokes are available from 3-30 mm, and gripping forces range from 10.5-979 lbf. Grippers are suited for machining...
Read More »Compact Rotary Actuators feature 4-position step rotors.
Automatic models SH-5 and SH-20 can rotate in 4 adjustable steps via 4 air inlets. Weighing 0.521 kg, model SH-5 features rotational angles up to 390Ã-
Read More »