TLV Corporation

Steel Separator/Filter creates dust/dirt free gas.
Agricultural & Farming Products

Steel Separator/Filter creates dust/dirt free gas.

Model SF1 Stainless Steel Separator-Filter removes condensate/particulates such as dirt and scale from dry steam or inert gas supplies. System delivers dry steam through cyclone separator to eliminate water spots and eliminates matter before filtering to reduce maintenance requirements. Other features include five-layered sintered wire mesh filter, one-piece design, CF8 stainless steel...

Read More »
Fluid & Gas Flow Equipment

Pressure Reducing Valve has stainless steel construction.

Direct-acting DR20SF PRV, available with 316L stainless steel wetted parts, is suited for pure and clean steam applications. Available in Â-½, ¾, and 1 in. NPT sizes, valve features Class 4 seat leakage rating for tight shutoff. Flow-up design, as well as flat valve and plug arrangement, lend to secondary pressure stability. Able to reach pressure reduction ratio of 30:1, product...

Read More »
Fluid & Gas Flow Equipment

Thermodynamic Disc Trap offers thermostatic air venting.

Cast steel P46SRN, suited for steam mains, tracers, and coils, features built-in screen, optional blow down unit, and stainless steel internals. Design provides inline access to internal parts, enabling unit to be serviced without removing body from installation. Available in Â-½, ¾, and 1 in. sizes in NPT and SW, product uses lapped disc for steam-tight seal without air binding. Air...

Read More »
Fluid & Gas Flow Equipment

Steam Trap suits low temperature heating applications.

Available in Â-½-1 in. NPT sizes, stainless steel Model LEX3N-TZ includes built-in auger, which removes scale and build-up from valve seat during operation, preventing steam leakage and loss of temperature control. Over-expansion protection prevents damage to bimetal element. Fully adjustable temperature setting from 120-390°F allows Model LEX3N-TZ to be used on steam service, as...

Read More »
Fluid & Gas Flow Equipment

Reducing Valve is suitable for air systems.

Direct-acting, stainless steel Model DR20 provides air pressure reduction and shut-off, and can be utilized in gas applications including CO2 and N2. Class 4 seat leakage rating ensures tight shut-off, while 30:1 turndown ratio provides close pressure control with 2-stage reduction. Stainless steel bellows-sealed design prevents fugitive emissions. Sizes include Â-½, ¾, and 1 in. NPT.

Read More »
Fluid & Gas Flow Equipment

Steam Traps eliminate superheat problems on steam mains.

Horizontal SS5NH and vertical SS5VH facilitate drainage of condensate from high-pressure superheated steam mains and turbines. They provide seal-tight shutoff with constant water seal and rotational seating design that eliminates concentrated valve wear. Its 3-point seating ensures steam-tight seal, even under no-load superheat conditions. Stainless steel products have up to 1,720 psig hydraulic...

Read More »
Fluid & Gas Flow Equipment

Bellows Seal Globe Valve is designed for steam service.

Compact BE3L features zero leak, triple seal construction, where bellows, gland packing, and stem seal act as impermeable barrier between fluid and environment. Forged steel construction and stainless steel bellows are tested to withstand 10,000 cycles, and tight shutoff is accomplished via stellite hardened surfaces on valve plug and seat. Available in Â-½-2 in. sizes in screwed, socket...

Read More »
Fluid & Gas Flow Equipment

Manifolds suits steam tracing applications.

VSDM and VCCM steam distribution and condensate collection manifolds employ designs that minimize installation area and adapt to plant requirements. Compact products reduce backpressure and prevent destructive 2-phase flow into condensate return piping with full 1 in. siphon construction. ASME code certified to 200 psig, products are available in trap sizes to 1 in. with NPT or SW connections.

Read More »
Fluid & Gas Flow Equipment

Condensate Recovery System handles temperatures to 392°F.

Available in cast iron or cast steel, GP14 PowerTrap(TM) pumps high-temperature condensate for vented receivers, sumps, and other pump applications. Non-electric design ensures no cavitation or seal leakage, and externally removable motive medium intake valve is protected by internal screen. Able to handle temperatures to 392°F and pressures to 200 psig, product has Inconel compression...

Read More »
Steel Separator/Filter creates dust/dirt free gas.
Agricultural & Farming Products

Steel Separator/Filter creates dust/dirt free gas.

Model SF1 Stainless Steel Separator-Filter removes condensate/particulates such as dirt and scale from dry steam or inert gas supplies. System delivers dry steam through cyclone separator to eliminate water spots and eliminates matter before filtering to reduce maintenance requirements. Other features include five-layered sintered wire mesh filter, one-piece design, CF8 stainless steel...

Read More »
Fluid & Gas Flow Equipment

Pressure Reducing Valve has stainless steel construction.

Direct-acting DR20SF PRV, available with 316L stainless steel wetted parts, is suited for pure and clean steam applications. Available in Â-½, ¾, and 1 in. NPT sizes, valve features Class 4 seat leakage rating for tight shutoff. Flow-up design, as well as flat valve and plug arrangement, lend to secondary pressure stability. Able to reach pressure reduction ratio of 30:1, product...

Read More »
Fluid & Gas Flow Equipment

Thermodynamic Disc Trap offers thermostatic air venting.

Cast steel P46SRN, suited for steam mains, tracers, and coils, features built-in screen, optional blow down unit, and stainless steel internals. Design provides inline access to internal parts, enabling unit to be serviced without removing body from installation. Available in Â-½, ¾, and 1 in. sizes in NPT and SW, product uses lapped disc for steam-tight seal without air binding. Air...

Read More »
Fluid & Gas Flow Equipment

Steam Trap suits low temperature heating applications.

Available in Â-½-1 in. NPT sizes, stainless steel Model LEX3N-TZ includes built-in auger, which removes scale and build-up from valve seat during operation, preventing steam leakage and loss of temperature control. Over-expansion protection prevents damage to bimetal element. Fully adjustable temperature setting from 120-390°F allows Model LEX3N-TZ to be used on steam service, as...

Read More »
Fluid & Gas Flow Equipment

Reducing Valve is suitable for air systems.

Direct-acting, stainless steel Model DR20 provides air pressure reduction and shut-off, and can be utilized in gas applications including CO2 and N2. Class 4 seat leakage rating ensures tight shut-off, while 30:1 turndown ratio provides close pressure control with 2-stage reduction. Stainless steel bellows-sealed design prevents fugitive emissions. Sizes include Â-½, ¾, and 1 in. NPT.

Read More »
Fluid & Gas Flow Equipment

Steam Traps eliminate superheat problems on steam mains.

Horizontal SS5NH and vertical SS5VH facilitate drainage of condensate from high-pressure superheated steam mains and turbines. They provide seal-tight shutoff with constant water seal and rotational seating design that eliminates concentrated valve wear. Its 3-point seating ensures steam-tight seal, even under no-load superheat conditions. Stainless steel products have up to 1,720 psig hydraulic...

Read More »
Fluid & Gas Flow Equipment

Bellows Seal Globe Valve is designed for steam service.

Compact BE3L features zero leak, triple seal construction, where bellows, gland packing, and stem seal act as impermeable barrier between fluid and environment. Forged steel construction and stainless steel bellows are tested to withstand 10,000 cycles, and tight shutoff is accomplished via stellite hardened surfaces on valve plug and seat. Available in Â-½-2 in. sizes in screwed, socket...

Read More »
Fluid & Gas Flow Equipment

Manifolds suits steam tracing applications.

VSDM and VCCM steam distribution and condensate collection manifolds employ designs that minimize installation area and adapt to plant requirements. Compact products reduce backpressure and prevent destructive 2-phase flow into condensate return piping with full 1 in. siphon construction. ASME code certified to 200 psig, products are available in trap sizes to 1 in. with NPT or SW connections.

Read More »
Fluid & Gas Flow Equipment

Condensate Recovery System handles temperatures to 392°F.

Available in cast iron or cast steel, GP14 PowerTrap(TM) pumps high-temperature condensate for vented receivers, sumps, and other pump applications. Non-electric design ensures no cavitation or seal leakage, and externally removable motive medium intake valve is protected by internal screen. Able to handle temperatures to 392°F and pressures to 200 psig, product has Inconel compression...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers