Macom Technology Solutions
Lowell, MA 01851
Share:
Passive Components are designed for DOCSIS 3.1 compliance.
Spanning upstream and downstream transformers/baluns, couplers, and power dividers/combiners, passive components for DOCSIS 3.1-compliant cable TV (CATV) and broadband Internet systems comply with DOCSIS 3.1 standard for high-bandwidth data transfer over existing hybrid fiber-coaxial (HFC) infrastructure. Bandwidths, insertion loss, return loss, power handling, distortion, and temperature...
Read More »
Power Amplifier targets 800-1,000 MHz frequency band.
Suited for RFID reader applications, 2 W Model MAAP-007649-000100 features greater than 1 W DRM spectral mask linearity and flat gain response. Typical performance at 900 MHz is 19 dB gain, 34 dBm P1dB, and 49 dBm output IP3. Amplifier requires single +7.5 Vdc supply, in addition to +4.5 V reference pin for power down and power control capability. It is RoHS-compliant and available in 4 mm,...
Read More »
HBT MMIC Amplifiers cover frequencies up to 3,300 MHz.
Covering frequency bands from 50-2,000 MHz, MAAM-007865-0P1R00 HBT MMIC amplifier has 20 dB gain with -
Read More »Horizon Wimba Launches Pronto
Hundreds of Colleges Worldwide Ready to Implement This Free, School-Centric Instant Messaging and Voice Chat Tool That Integrates with Blackboard and WebCT NEW YORK, Dec. 7 -- The wait is finally over for the hundreds of colleges and universities worldwide that have already reserved Pronto. This morning, Horizon Wimba, the leading provider of collaboration tools and software applications to the...
Read More »Power Amplifier targets 802.11b/g MIMO WLAN applications.
Model MAAP-008015 is 2.4 GHz, silicon germanium (SiGe) 3-stage linear power amplifier offered in lead-free 3 mm 12-lead PQFN plastic package. For 802.11g applications, amplifier generates 16 dBm of linear output power while drawing 65 mA of current and maintaining EVM of less than 3.0%. For 802.11b applications, device generates up to 20 dBm of linear output power while consuming 100mA of...
Read More »Power Amplifiers target point-to-point radios.
Covering radio frequency bands from 2.5-19.7 GHz, MAAPGM00XX-DIE Amplifiers produce power levels from 1-2 W with third order intercept points from 38 to 44 dBm. Units feature gain up to 34 dB and flatness of less than -
Read More »
Radar Sensors are designed for driver-assistance systems.
Resistant to inclement weather and harsh environmental conditions, 24 GHz ultra wide band (UWB) radar sensors provide object detection and tracking. Parking assistance can be provided by rear-mounted sensors with 1.8 m range that can detect small objects in front of large objects and measure direction of arrival. Sensors with ability to scan out up to 30 m provide warning of imminent collision so...
Read More »
Driver Amplifier is used in wireless applications.
Utilized in WiMAX, WiBro, and UMTS/WCDMA base stations, Model MAAMSS0071 single-stage driver amplifier is fabricated using GaAs HBT process. Product features gain blocks with output of P1dB levels of +26 dBm and gain of 16 dB at 2,140 MHz. Housed in lead-free, RoHS compliant SOT-89 plastic package, amplifier offers 500-2,500 MHz bandwidth, which can be optimized for specific frequency range with...
Read More »
SP4T Switch suits antenna switch module applications.
Housed in lead-free PQFN package, RoHS-compliant Model MASW-007813 is designed to maintain linearity up to 3.0 GHz, with P0.1 dB of 38 dBm, typical insertion loss of 0.6 dB, and IIP3 of 57 dBm. Switch is fabricated through 0.5 micron gate-length GaAs pHEMT process, with full passivation added. It is suited for multi-switching systems that operate on single antenna, including GSM communication...
Read More »
SPDT Switch achieves 100% settled state within 10 µs.
Fabricated on 0.5-micron gate-length GaAs process with full passivation, MASW-007107 features low insertion loss of 0.5 dB up to 6 GHz and 0.7 dB up to 8 GHz, and isolation of 30 dB. It is suitable for systems that require up to 27 dBm of output power with EVM less than 2% for OFDM, 64 QAM, 54 Mbps signal. This 8 GHz RoHS compliant switch is available in 2 mm 8 lead power quad flat leadless...
Read More »Passive Components are designed for DOCSIS 3.1 compliance.
Spanning upstream and downstream transformers/baluns, couplers, and power dividers/combiners, passive components for DOCSIS 3.1-compliant cable TV (CATV) and broadband Internet systems comply with DOCSIS 3.1 standard for high-bandwidth data transfer over existing hybrid fiber-coaxial (HFC) infrastructure. Bandwidths, insertion loss, return loss, power handling, distortion, and temperature...
Read More »
Power Amplifier targets 800-1,000 MHz frequency band.
Suited for RFID reader applications, 2 W Model MAAP-007649-000100 features greater than 1 W DRM spectral mask linearity and flat gain response. Typical performance at 900 MHz is 19 dB gain, 34 dBm P1dB, and 49 dBm output IP3. Amplifier requires single +7.5 Vdc supply, in addition to +4.5 V reference pin for power down and power control capability. It is RoHS-compliant and available in 4 mm,...
Read More »
HBT MMIC Amplifiers cover frequencies up to 3,300 MHz.
Covering frequency bands from 50-2,000 MHz, MAAM-007865-0P1R00 HBT MMIC amplifier has 20 dB gain with -
Read More »Horizon Wimba Launches Pronto
Hundreds of Colleges Worldwide Ready to Implement This Free, School-Centric Instant Messaging and Voice Chat Tool That Integrates with Blackboard and WebCT NEW YORK, Dec. 7 -- The wait is finally over for the hundreds of colleges and universities worldwide that have already reserved Pronto. This morning, Horizon Wimba, the leading provider of collaboration tools and software applications to the...
Read More »Power Amplifier targets 802.11b/g MIMO WLAN applications.
Model MAAP-008015 is 2.4 GHz, silicon germanium (SiGe) 3-stage linear power amplifier offered in lead-free 3 mm 12-lead PQFN plastic package. For 802.11g applications, amplifier generates 16 dBm of linear output power while drawing 65 mA of current and maintaining EVM of less than 3.0%. For 802.11b applications, device generates up to 20 dBm of linear output power while consuming 100mA of...
Read More »Power Amplifiers target point-to-point radios.
Covering radio frequency bands from 2.5-19.7 GHz, MAAPGM00XX-DIE Amplifiers produce power levels from 1-2 W with third order intercept points from 38 to 44 dBm. Units feature gain up to 34 dB and flatness of less than -
Read More »
Radar Sensors are designed for driver-assistance systems.
Resistant to inclement weather and harsh environmental conditions, 24 GHz ultra wide band (UWB) radar sensors provide object detection and tracking. Parking assistance can be provided by rear-mounted sensors with 1.8 m range that can detect small objects in front of large objects and measure direction of arrival. Sensors with ability to scan out up to 30 m provide warning of imminent collision so...
Read More »Carol Vallone Joins Horizon Wimba Board of Directors
NEW YORK and DALLAS, Oct. 9, 2006 -- EDUCAUSE 2006 Annual Conference -- Horizon Wimba, the leading provider of collaboration tools and software applications to the online education market, announced today that Carol Vallone, former CEO of WebCT, has joined its Board of Directors. As a member of the Board, Carol will lend her substantial expertise in education technology to help guide future...
Read More »
Driver Amplifier is used in wireless applications.
Utilized in WiMAX, WiBro, and UMTS/WCDMA base stations, Model MAAMSS0071 single-stage driver amplifier is fabricated using GaAs HBT process. Product features gain blocks with output of P1dB levels of +26 dBm and gain of 16 dB at 2,140 MHz. Housed in lead-free, RoHS compliant SOT-89 plastic package, amplifier offers 500-2,500 MHz bandwidth, which can be optimized for specific frequency range with...
Read More »
SP4T Switch suits antenna switch module applications.
Housed in lead-free PQFN package, RoHS-compliant Model MASW-007813 is designed to maintain linearity up to 3.0 GHz, with P0.1 dB of 38 dBm, typical insertion loss of 0.6 dB, and IIP3 of 57 dBm. Switch is fabricated through 0.5 micron gate-length GaAs pHEMT process, with full passivation added. It is suited for multi-switching systems that operate on single antenna, including GSM communication...
Read More »