Servo Magnetics
Chatsworth, CA 91311
Share:
Brushless DC Motor Controller provides 1,000 W of power.
Featuring 3.00 x 4.65 x 1.75 in. footprint, Model 371-0028 is suitable for closed or open loop velocity and torque control of BLDC motors producing greater than 160 oz-in. at 7,000 rpm. Input voltage varies from 10-50 V with rating of 20 A continuous and 40 A peak for rapid acceleration applications. Unit includes quick disconnect, LED status indication, FWD/REV, and tachometer output. It is...
Read More »
Brushless DC Kit Motor features smooth operation.
Suited for applications sensitive to torque ripple, model 000308-02 produces cogging torque of no greater than 1 oz-in. at 60 rpm. Smooth running characteristics make unit eligible for use in high-resolution printing, scanning, and positioning applications. Proprietary encapsulation process protects motor windings in harsh environments. Measuring 3.6 x 1.25 in., product has peak torque of 200...
Read More »
Brushless DC Motor is designed for low voltage applications.
At 48 V, Model 000-0358 brushless DC frameless motor operates at 200 rpm and delivers 600 oz-in. of torque with 80% efficiency and can deliver burst of stall torque up to 1,300 oz-in. Compact 6.5 in. dia x 2 in. long motor utilizes high-energy, high-temperature, rare-earth magnets, making it suitable for use in applications where demanding temperatures are found. Custom mounting configurations...
Read More »
Dual-Wire Brushless DC Blower has compact design.
DC blower incorporates embedded drive and commutation electronics in brushless design, providing 2-wire input. Impeller and rotor are balanced to provide vibration-free, low-noise operation. With 2.9 in. dia and 2.8 in. long design, 12 V unit produces 10 in. of H2O pressure and has max flow rate of 18 cfm. Windings for other voltages are available upon request. Product suits applications where...
Read More »
Hollow-Shaft Spindle features brushless dc motor.
Hollow-Shaft Motorized Spindle utilizes 1,024-line, 2-channel encoder for precise control. Minute air gaps between shaft and spindle housing together with shaft run-outs held within 0.0003 in. permit vacuum to be established via spindle housing, and through hollow shaft without contact seals. Motor produces 5 oz-in. of torque at operating speed of 15,000 rpm within 2.20 in. OD x 3.18 in. L...
Read More »
Brushless Motor suits closed-loop positioning applications.
Equipped with 0.75 in. OD X 3.4 in. long stainless steel housing, dc motor is capable of delivering peak torque of 10 oz-in. with 3.6 A @ 7,000 rpm. Mechanical time constant is 1.43 msec, and electrical time constant is 0.15 msec. Rotor inertia of 2.8 X 10-5 oz-in.-secÃ-² facilitates acceleration and deceleration. Motor also has 96-line, 2-channel quadrature encoder for positioning accuracy....
Read More »
Voice Coil Actuator produces 9.5 lb of continuous force.
Linear Voice Coil Actuator allows user to apply force directly in linear direction without mechanical conversion device such as ball screw or gearbox. Measuring 2.72 in. dia x 1.06 in. long, unit features low-mass, molded inner-moving coil and mounting holes. It can produce peak forces greater than 25 lb with approximately 170 W of power. Custom mountings and winding configurations are available.
Read More »Brushless DC Motor offers high torque in limited space.
Featuring 0.51 in. profile and 3.77 in. diameter, 12 V Model 000-0317 is capable of delivering in excess of 75 oz-in. of torque. Large inner-rotor dimension accommodates variety of mounting configurations including light beam passage or wire/cable channeling. Stator is molded, high-temperature plastic with 4 screw-mount tabs. Commutation feedback utilizes Hall-Effect sensors, although various...
Read More »
Brushless DC Motor has outside rotor.
Suited for polygon scanners and blowers requiring stable speed, compact outer rotor brushless dc motor has low-profile 1.5 x 1.2 in. design that produces over 3 oz-in. continuous torque and is capable of speeds greater than 20,000 rpm. Product is optimized for low cogging torque, and design provides direct coupling interface in many applications. Rotor cup is 2-plane balanced for minimal noise...
Read More »
Brushless DC Motor provides low voltage operation.
With operating voltage of 12 V, Model 000-0222 delivers 25 oz-in. continuously or in excess of 80 oz-in. peak torque. Measuring 2.25 in. dia x 2.23 in. long, it utilizes cast end bell and front NEMA-23 style plate mount. Motor is intended for reciprocating load requirements and is suited for blower, pump, and industrial process applications. It is configured for Hall-effect sensors, but can be...
Read More »
Brushless DC Motor Controller provides 1,000 W of power.
Featuring 3.00 x 4.65 x 1.75 in. footprint, Model 371-0028 is suitable for closed or open loop velocity and torque control of BLDC motors producing greater than 160 oz-in. at 7,000 rpm. Input voltage varies from 10-50 V with rating of 20 A continuous and 40 A peak for rapid acceleration applications. Unit includes quick disconnect, LED status indication, FWD/REV, and tachometer output. It is...
Read More »
Brushless DC Kit Motor features smooth operation.
Suited for applications sensitive to torque ripple, model 000308-02 produces cogging torque of no greater than 1 oz-in. at 60 rpm. Smooth running characteristics make unit eligible for use in high-resolution printing, scanning, and positioning applications. Proprietary encapsulation process protects motor windings in harsh environments. Measuring 3.6 x 1.25 in., product has peak torque of 200...
Read More »
Brushless DC Motor is designed for low voltage applications.
At 48 V, Model 000-0358 brushless DC frameless motor operates at 200 rpm and delivers 600 oz-in. of torque with 80% efficiency and can deliver burst of stall torque up to 1,300 oz-in. Compact 6.5 in. dia x 2 in. long motor utilizes high-energy, high-temperature, rare-earth magnets, making it suitable for use in applications where demanding temperatures are found. Custom mounting configurations...
Read More »
Dual-Wire Brushless DC Blower has compact design.
DC blower incorporates embedded drive and commutation electronics in brushless design, providing 2-wire input. Impeller and rotor are balanced to provide vibration-free, low-noise operation. With 2.9 in. dia and 2.8 in. long design, 12 V unit produces 10 in. of H2O pressure and has max flow rate of 18 cfm. Windings for other voltages are available upon request. Product suits applications where...
Read More »
Hollow-Shaft Spindle features brushless dc motor.
Hollow-Shaft Motorized Spindle utilizes 1,024-line, 2-channel encoder for precise control. Minute air gaps between shaft and spindle housing together with shaft run-outs held within 0.0003 in. permit vacuum to be established via spindle housing, and through hollow shaft without contact seals. Motor produces 5 oz-in. of torque at operating speed of 15,000 rpm within 2.20 in. OD x 3.18 in. L...
Read More »
Brushless Motor suits closed-loop positioning applications.
Equipped with 0.75 in. OD X 3.4 in. long stainless steel housing, dc motor is capable of delivering peak torque of 10 oz-in. with 3.6 A @ 7,000 rpm. Mechanical time constant is 1.43 msec, and electrical time constant is 0.15 msec. Rotor inertia of 2.8 X 10-5 oz-in.-secÃ-² facilitates acceleration and deceleration. Motor also has 96-line, 2-channel quadrature encoder for positioning accuracy....
Read More »
Voice Coil Actuator produces 9.5 lb of continuous force.
Linear Voice Coil Actuator allows user to apply force directly in linear direction without mechanical conversion device such as ball screw or gearbox. Measuring 2.72 in. dia x 1.06 in. long, unit features low-mass, molded inner-moving coil and mounting holes. It can produce peak forces greater than 25 lb with approximately 170 W of power. Custom mountings and winding configurations are available.
Read More »Brushless DC Motor offers high torque in limited space.
Featuring 0.51 in. profile and 3.77 in. diameter, 12 V Model 000-0317 is capable of delivering in excess of 75 oz-in. of torque. Large inner-rotor dimension accommodates variety of mounting configurations including light beam passage or wire/cable channeling. Stator is molded, high-temperature plastic with 4 screw-mount tabs. Commutation feedback utilizes Hall-Effect sensors, although various...
Read More »
Brushless DC Motor has outside rotor.
Suited for polygon scanners and blowers requiring stable speed, compact outer rotor brushless dc motor has low-profile 1.5 x 1.2 in. design that produces over 3 oz-in. continuous torque and is capable of speeds greater than 20,000 rpm. Product is optimized for low cogging torque, and design provides direct coupling interface in many applications. Rotor cup is 2-plane balanced for minimal noise...
Read More »
Brushless DC Motor provides low voltage operation.
With operating voltage of 12 V, Model 000-0222 delivers 25 oz-in. continuously or in excess of 80 oz-in. peak torque. Measuring 2.25 in. dia x 2.23 in. long, it utilizes cast end bell and front NEMA-23 style plate mount. Motor is intended for reciprocating load requirements and is suited for blower, pump, and industrial process applications. It is configured for Hall-effect sensors, but can be...
Read More »