Kurt Manufacturing

Single-Station CNC Vises feature one-piece body, stationary jaw.
Machinery & Machining Tools

Single-Station CNC Vises feature one-piece body, stationary jaw.

With one-piece body and stationary jaw design, VersatileLock® Vises provide rigid clamping with 0.0005 in. repeatable accuracy. There are 12 models, available in manual, air, and hydraulic versions, designed to handle range of part clamping applications. AngLock® feature and pull-type clamping design reduce stationary jaw deflection. Respectively, clamping forces for models 3600...

Read More »
Custom Workholding System improves machining throughput.
Machinery & Machining Tools

Custom Workholding System improves machining throughput.

Applicable to new machining projects as well as those requiring improved throughput, Custom Engineered Workholding provides precise and repeatable part clamping; high-density, flexible clamping ofÂ- related parts on same fixture; and rigidity. Accelerated load/unload features increase part output to maximize productive machining center capacity. Options include hydraulics, air...

Read More »
Kurt Now Offers 15 Different 5-Axis Workholding Options for Medical, Oilfield, Aerospace, Mold/Die Work
Machinery & Machining Tools

Kurt Now Offers 15 Different 5-Axis Workholding Options for Medical, Oilfield, Aerospace, Mold/Die Work

Minneapolis, Minnesota: 5-axis machining varies from very small to extremely large and requires the right workholding to obtain optimal machining results and no single workholding option solves all needs, reports Kurt Manufacturing. Part complexity and size requirements coupled with machine capabilities and limitations dictate what workholding works best. To meet these challenges, Kurt has...

Read More »
Pneumatic/Hydraulic Pumps serve precision clamping applications.
Fluid & Gas Flow Equipment

Pneumatic/Hydraulic Pumps serve precision clamping applications.

Compatible withÂ- Kurt single-acting 4, 6, and 8 in. vises, portable KHP5000PH provides constant hydraulic pressure and holding power. Pump operates with ordinary shop air at 20–90 psi input and incorporates internal load limiting valve, air exhaust muffler, and air and oil filters. Rated at 5,000 psi, air hydraulic pump is driven by 1 hp pneumatic motor and actuated with hand...

Read More »
Kurt Features Its Newest Workholding Devices at EASTEC 2013, West Springfield, MA - Booth 5130
Machinery & Machining Tools

Kurt Features Its Newest Workholding Devices at EASTEC 2013, West Springfield, MA - Booth 5130

Minneapolis, Minnesota: Kurt's expanded lineup of advanced workholding products for improved machining productivity will be featured at EASTEC 2013 Booth 5130, May 14-16th. New Kurt SideWinder(TM) For Second Operation Machining Kurt's New SideWinder(TM) Vise provides vertical workholding for second operation machining in the same setup by easily mounting to the back of all Kurt industry standard...

Read More »
Five-Axis Vises feature self centering design.
Portable Tools

Five-Axis Vises feature self centering design.

Available with 2 Â-½, 4, and 4 ½ in. jaw widths, MaxLock™ Vises are designed for precision small part machining. Units align parts in vise and reduce part lift to minimum by pulling parts down and holding them with maximum rigidity for close tolerance repeatability in all axes. Suited for parts up to 6 ½ in. long, vises clamp both OD and ID and feature adjustable...

Read More »
Vise Accessories provide for 30°, 45°, and 60° setups.
Portable Tools

Vise Accessories provide for 30°, 45°, and 60° setups.

Used with standard 6 in. vise, Sine Parallels enable rectangle parts for machining to be clamped at 30°, 45° and 60° angles. They install and position with single bolt for each plate and jaw plates remain in vise while using them. Following initial setup, Sine Parallels can be changed to any other angle and also be used as a parallel. They also provide opportunity for clamping...

Read More »
"Kurt Introduces New Vises Including Ultra Precise 4 Inch Vise, Several New Workholding Devices, PLUS Integrated Gaging and Custom Workholding
Communication Systems & Equipment

"Kurt Introduces New Vises Including Ultra Precise 4 Inch Vise, Several New Workholding Devices, PLUS Integrated Gaging and Custom Workholding

At IMTS 2012, McCormick Place - West Hall, Booth 2423 Minneapolis, Minnesota: A greatly expanded lineup of advanced workholding products to improve machining productivity will by featured by Kurt at IMTS 2012. Boasting a 360°, full circle product advantage", Kurt's "must see" exhibit is at the West Hall, Booth 2423, September 10-15th. New 3400V Ultra Precise 4-Inch Vise With 6-Inch Jaw...

Read More »
Hydraulic Pump provides constant pressure and holding power.

Hydraulic Pump provides constant pressure and holding power.

Designed for use with hydraulic vises, cluster towers, and swing clamps, 5,000 psi Hydraulic Pump is driven by pneumatic motor and operates from 90-145 psi shop air using foot pedal. Unit maintains constant pressure when foot pedal is depressed regardless of system pressure, ensuring accurate and repeatable clamping pressure with every clamping cycle. Designed for single acting systems, pump...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers