Wittenstein Inc

Software

Software Toolkit turns PDAs into portable teach pendants.

Providing users with portable version of proTern(TM) software, pockeTern(TM) enables plant technicians to commission, test, download data, and recalibrate alpha Ternary® actuators right at machine. It provides project-oriented environment, functioning as intelligent commissioning tool, diagnostic tool, and OEM application program manager. Utilizing Microsoft.net Framework, software also...

Read More »
Mechanical Power Transmission

Planetary Gearheads mount in one step to servomotor.

Available in 7 sizes, SP+ gearheads have output bearing design and utilize proprietary shaft seals that offer IP 65/66 protection. Dry-lubricated design contributes to units' 30,000 hr rated service life. Available in gear ratios from 3:1-100:1, including binary gear ratios, products run up to 4,500 rpm in continuous operation and feature noise levels down to 64 dB(A). They offer 17-750 Nm...

Read More »
Mechanical Power Transmission

Linear Actuators include Profibus and DeviceNet versions.

Ternary® Actuators can be programmed with position, velocity, acceleration, deceleration, and force/torque commands. With stroke lengths of 25-300 mm, 46 mm frame size units feature speeds to 450 mm/sec and forces to 600 N. Rotary version offers gear ratios from 5:1-25:1 and torques up to 6.9 Nm. Featuring stroke lengths of 25-300 mm, 32 mm frame size actuators offer speeds to 900 mm/sec...

Read More »
Mechanical Power Transmission

Servo Actuator produces 480-2,600 Nm continuous torque.

TPMA AC Servo Actuator consists of one brushless ac servomotor with TP-High Torque planetary gearhead, resolver or absolute encoder, and optional holding brake. Available in various frame sizes, product comes in gear ratios of 110:1 and 220:1. Unit incorporates tapered roller bearings in output stage, driving flange, and integrates pinion gear in motor, allowing positioning accuracy of less than...

Read More »
Mechanical Power Transmission

Planetary Gearheads are offered in 2 new sizes.

Series LP gearheads, suited for general motion control, are now available in 7:1, single-stage and 70:1, 2-stage gear ratios. Series is available in NEMA sizes from 23-56, torque ranges from 46-2,566 lb-in., and ratios from 3:1 through 100:1. LPB series LP gearbox and integrated belt pulley solutions eliminate need for right angle gearbox and couplings. They directly support high belt tensions...

Read More »
Mechanical Power Transmission

Rack and Pinion System offers high linear accuracy.

Rack and Pinion System includes gear reducer or gearmotor with integrated pinion and rack. All mounting surfaces are ground to tight tolerances. Standard rack lengths are 167 to 500 mm. High linear accuracy is due to minimum total pitch error of 12 Â-µm per 500 mm of length. Load capacities up to 13,000 N are available. Wear-resistant surface treatment and individually deburred gear teeth...

Read More »
Mechanical Power Transmission

Pully Drive System integrates with linear module applications.

LPB integrated geared pulley drive system is available in sizes from 70 to 120 mm with ratios of 1:1, 3:1, 5:1, and 10:1. Gearbox has flange output, allowing it to be nested inside pulley, eliminating need for right angle gearbox, couplings and/or additional bearings. LPB design increases radial load capacity associated with belt and pulley applications, greatly increasing output bearing life.

Read More »
Software facilitates set up of linear and rotary actuators.
Mechanical Power Transmission

Software facilitates set up of linear and rotary actuators.

proTern(TM) software is designed for Ternary linear and rotary actuator system. With Ternary, any of 16 specific positions can be defined via software, then achieved with absolute accuracy. proTern provides real numerical data for position, velocity, acceleration, deceleration, and force/torque commands using PC or handheld PDA. Ternary is available in 46 mm frame size, with stroke lengths of 25...

Read More »
Mechanical Power Transmission

Servo Gearhead has compact right angle design.

V-Drive series right angle gearheads for servo motor applications are available in 4 frame sizes with continuous output torque ratings of 39 to 1072 Nm, ratios from 4:1 to 40:1, and 6 different output styles. Outputs include flange mount output, hollow shaft smooth, hollow shaft keyed, shaft mount smooth, shaft mount keyed, and spline shaft option for rack and pinion applications. Drive comes...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers