AMETEK Dynamic Fluid Solutions
Kent, OH 44240
Brush-Commutated DC Motors provide quiet operation.
Designed with 2-pole stators, PITTMAN-® Series 9000 incorporates 7-slot skewed armatures to minimize magnetic cogging and enable smooth, quiet-running operation. Commutators are diamond turned after armature assembly to ensure concentricity, while windings are resin-impregnated for reliability in incremental motion applications. Offered in 6 lengths from 1.82-3.35 in., motors can achieve max...
Read More »
Brushless dc Blowers achieve max flow rates up to 190 cfm.
Offered in bypass and thru-flow versions, variable-speed Windjammer-® Blowers accept line voltage up to 72 Vdc, depending on model. Units provide output pressure up to 97.7 in. H2O and are virtually maintenance free. Speed can be adjusted internally with onboard potentiometer, external PWM, or dc control. Measuring 5.7 in. dia, low-noise blowers are suitable for medical and industrial equipment,...
Read More »
Brushless DC Motors provide continuous torque to 40 oz-in.
ELCOM ST-® Series N2300 slotted brushless DC motors incorporate internal Hall sensor feedback for linear speed-torque characteristics, and variable speed control with control electronics. Motor features 6-slot lamination design and mount configuration that is consistent with NEMA 23 standards. At 2.3 in. in diameter, motors are available in standard stack lengths of -½,1,1-½, and 2 in.,...
Read More »
Slotted Brushless DC Servomotors suit limited-space areas.
Available in 1.5, 2, and 2.5 in. lengths, 1.3 in. dia PITTMAN-® Series 1300 motors achieve model-dependent peak torques from 10-57 oz-in. and continuous torques from 3.5-8.5 oz-in. Rotor construction allows rotational speeds to 8,000 rpm, and 3 Hall sensors provide rotor position feedback for electronic commutation. Supplied in aluminum housing, products also feature 3-phase stator with 6-slot...
Read More »Regenerative Blower suits concrete applications.
Offered as drop-in replacement for DR 707 regenerative blower, DR757 features compact construction and is powered by 4 hp motor that draws less than 7 A. Design, based on sound attenuation method, utilizes noise cancellation technology; further reductions are achievable through use of sound enclosures.
Read More »
Water Pumps can be used in harsh environments.
Seal-Less 47 Frame water circulation pumps have re-engineered bearing system that increases rated service life to 60,000 hours of continuous duty. Pump is constructed of brass, and is available in 12 and 24 Vdc versions with identical flow ratings and multiple inlet and outlet configurations. Seal-Less pumps are magnetically coupled, eliminating all seals and inherent seal leakage.
Read More »AMETEK DFS Hosts Fluid Moving Basics Webinar to Help Medical Device and Equipment Engineers, Product Professionals Drive More Quality, Efficiency and Cost Savings into Designs
Kent, OH (Feb. 17, 2021) – AMETEK Dynamic Fluid Solutions (DFS) -- the leading air-moving technology manufacturer of motors, blowers, fans, and pumps -- announced that it will host a webinar titled “Fluid Moving Basics for Medical Device and Equipment Designs.” This complimentary event will take place Tuesday, Feb. 23 at 2 pm EST, and will be hosted by Kevin Martin, Engineering...
Read More »AEM Limited Achieves JOSCAR Accreditation
Stansted Airport, Essex (Aug. 6, 2020) – AMETEK AEM Limited is delighted to announce it has achieved JOSCAR accreditation. JOSCAR (the Joint Supply Chain Accreditation Register) is a collaborative tool used by the aerospace, defense and security industry to act as a single repository for pre-qualification and compliance information. Using JOSCAR can determine if a supplier is “fit for...
Read More »
Brush-Commutated DC Motors provide quiet operation.
Designed with 2-pole stators, PITTMAN-® Series 9000 incorporates 7-slot skewed armatures to minimize magnetic cogging and enable smooth, quiet-running operation. Commutators are diamond turned after armature assembly to ensure concentricity, while windings are resin-impregnated for reliability in incremental motion applications. Offered in 6 lengths from 1.82-3.35 in., motors can achieve max...
Read More »
Brushless dc Blowers achieve max flow rates up to 190 cfm.
Offered in bypass and thru-flow versions, variable-speed Windjammer-® Blowers accept line voltage up to 72 Vdc, depending on model. Units provide output pressure up to 97.7 in. H2O and are virtually maintenance free. Speed can be adjusted internally with onboard potentiometer, external PWM, or dc control. Measuring 5.7 in. dia, low-noise blowers are suitable for medical and industrial equipment,...
Read More »
Brushless DC Motors provide continuous torque to 40 oz-in.
ELCOM ST-® Series N2300 slotted brushless DC motors incorporate internal Hall sensor feedback for linear speed-torque characteristics, and variable speed control with control electronics. Motor features 6-slot lamination design and mount configuration that is consistent with NEMA 23 standards. At 2.3 in. in diameter, motors are available in standard stack lengths of -½,1,1-½, and 2 in.,...
Read More »
Slotted Brushless DC Servomotors suit limited-space areas.
Available in 1.5, 2, and 2.5 in. lengths, 1.3 in. dia PITTMAN-® Series 1300 motors achieve model-dependent peak torques from 10-57 oz-in. and continuous torques from 3.5-8.5 oz-in. Rotor construction allows rotational speeds to 8,000 rpm, and 3 Hall sensors provide rotor position feedback for electronic commutation. Supplied in aluminum housing, products also feature 3-phase stator with 6-slot...
Read More »Regenerative Blower suits concrete applications.
Offered as drop-in replacement for DR 707 regenerative blower, DR757 features compact construction and is powered by 4 hp motor that draws less than 7 A. Design, based on sound attenuation method, utilizes noise cancellation technology; further reductions are achievable through use of sound enclosures.
Read More »
Water Pumps can be used in harsh environments.
Seal-Less 47 Frame water circulation pumps have re-engineered bearing system that increases rated service life to 60,000 hours of continuous duty. Pump is constructed of brass, and is available in 12 and 24 Vdc versions with identical flow ratings and multiple inlet and outlet configurations. Seal-Less pumps are magnetically coupled, eliminating all seals and inherent seal leakage.
Read More »