Hitachi Power Tools (Koki)

Construction Equipment and Supplies

Rotary Hammer provides 3 modes of operation.

Equipped with 7.0 A motor, 15/16 in. SDS Plus Rotary Hammer, Model DH24PF3 produces 2.5 lb-ft impact energy, no-load speed of 0?1,150 rpm, and impact rate of 0?4,600 ipm. Three modes of operation include drilling only, hammering only, and hammer drilling, controlled by mode selector dial located under body. When using cold chisel or spade bit, variable lock mechanism, available in hammer mode...

Read More »
Agricultural & Farming Products

Cordless Driver Drills weigh less than 4.5 lb.

Models DS18DVF3, DS14DVF3, and DS12DVF3 are 18, 14.4, and 12 V cordless power drills with 2-piece magnet motors delivering 400, 300, and 230 lb-in. torque, respectively. Two-speed transmission controlled by 1-touch speed shift knob allows user to select between 0-400 or 0-1,200 rpm on DS18DVF3 and DS14DVF3 models and 0-350 or 0-1,050 rpm on Model DS12DVF3. Measuring just over 7.5 in., units...

Read More »
Construction Equipment and Supplies

Rotary Hammer features vibration absorbing grip.

Featuring 5.9 A motor with 620 W input power, 7/8 in. Model DH22PB cuts concrete, mortar, and tile. It offers drilling only or hammer drilling modes, lock-on speed button for continuous operation, and electronic variable speed control of 0-1,150 (0-640 reverse) rpm and 0-4,400 ipm impact rate. DH22PB weighs 5.1 lb, is 13.81 in. long, and features mode selector dial, lock-on speed button, and...

Read More »
Portable Tools

Impact Wrench features ergonomic design.

Covered in soft elastomer compound that absorbs vibration and provides slip-resistant grip, Â-½ in. WR16SA is constructed with aluminum housing intertwined with injection molded inner nylon core. Armature bearing is seated in aluminum to withstand heat and stress resulting from extreme use. Weighing 6.17 lb, this 10.15 in. long tool uses 4.2 A, 480 W motor to produce up to 3,190 lb-in....

Read More »
Fluid & Gas Flow Equipment

Gas Wheelbarrow Air Compressor has portable design.

Designed to withstand jobsite use, 5.5 hp EC2510E incorporates cast iron pump and oversized oil level sight glass. Base plate integrated control panel protects gauge, regulators, and plumbing while centralizing all controls to facilitate in-field use. Product cycles from 116-145 psi and also features pneumatic throttle control, over-sized flywheel and head scoop, braided stainless steel exhaust,...

Read More »
Agricultural & Farming Products

Cordless Hammer Drills power through many materials.

Powered by 2-piece rare-earth magnet motor and motor cooling system, tools can drill, drive, and hammer into wood, plastic, steel, aluminum, brick, and concrete block. Two 3.0 Ah NiMH batteries power DV18DMR 18 V drill to deliver 550 lb-in. of torque. DV14DMR 14 V delivers 460 lb-in. of torque with two 2.0 Ah NiCD batteries. Drills offer 2-speed transmission, no-load rpm, Â-½ in. industrial...

Read More »
Portable Tools

Impact Drivers/Wrenches have cordless, balanced design.

DMR series includes 9.6 V (WH9DMR, WR9DMR), 12 V (WH12DMR, WR12DMR), 14.4 V (WH14DMR, WR14DMR), and 18 V (WH18DMR, WR18DMR) impact drivers and impact wrenches. Along with 2-piece motor with copper coils, series incorporates integral Cool Flow system that minimizes risk of motor burnout. Series produces 930-1,950 lb-in., depending on model, and has electronic feedback power control switch that...

Read More »
Portable Tools

Drywall Screwdrivers offer ergonomic design.

Models W6V4, W6VA4, W6VB3, and W6VM feature respective no-load speeds of 0-4,500, 0-3,000, 0-2,600, and 0-6,000 rpm as well as max torques of 81.5, 112.7, 139.6, and 69.4 lb-in. All are equipped with 6.6 A motors and 750 W of input power. Bodies and handles are covered in elastomer compound for slip-resistant grip, and handles are angled outward to conform to hand during repetitive use....

Read More »
Machinery & Machining Tools

Compound Miter Saws offer range of 0-52° to right and left.

Model C12LC includes digital LCD display to view miter and bevel readings, while Model C12FCH features laser marker that indicates where blade will cut material and can be adjusted to right or left. Both 12 in. saws are powered by 15 A motor with 1,950 W of max output power. Standing at height of 5 1/8 in., pivoting aluminum fence allows crown molding to be cut vertically. Miter angles can be...

Read More »
Construction Equipment and Supplies

Clipped Head Framing Nailer can fasten engineered lumber.

Featuring aggressive design that minimizes user fatigue, 7 lb, 3.5 in. NR90AD operates at pressures from 70-120 psi. Selective actuation allows user to switch sequential to contact fire, while tool-less depth of drive dial adjusts for flush or countersunk drives into varying material. Also included: carbon steel toenail and nose mounted vibration pads; rear-loading, 2-piece aluminum magazine; and...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers