Epix, Inc.

Software

Imaging Software supports Windows® 8 and Linux 3.x kernels.

XCAP imaging programs, with dedicated support for 1,000+ camera models, also support Osprey and Owl cameras from Raptor Photonics as well as Bonito camera from Allied Vision Technologies. Depending on data rate of camera and computer’s memory or RAID capacity, XCAP-Std v3.8 streams video to memory or disk for seconds, minutes, or hours. XCAP-Viewer allows loading and viewing of images and image...

Read More »
PCIe x4 Frame Grabber for High Resolution, High Quality, Analog Video
Computer Hardware & Peripherals

PCIe x4 Frame Grabber for High Resolution, High Quality, Analog Video

The PIXCI® A310 video frame grabber acquires images from monochrome or component RGB color cameras with formats that include RS-170, CCIR, RS343, VGA, SVGA, XGA, WXGA, SXGA, SXGA+, WXGA, WSGA+, and UXGA. Many capture resolutions are available including 1920x1080p, 1920x1080i, 1280x720p, 720x480p, and 720x576p using programmable pixel clock frequencies from12 to 165 MHz. The PIXCI®...

Read More »
Progressive Scan Cameras has programmable pixel clock.
Optics & Photonics

Progressive Scan Cameras has programmable pixel clock.

SILICON VIDEO®10C6 (color) and 10M6 (monochrome) offer 10 MP progressive scan images with resolution of 3,840 x 2,764 pixels and 12 bits per pixel. Programmable area of interest, along with column and row skip modes and binning, allows resolution reduction for higher frame rates. Other features include asynchronous/triggered capture and programmable pixel clock. In addition to control for...

Read More »
Computer Hardware & Peripherals

Frame Grabber acquires composite and S-Video images.

Low profile PIXCI® SV5L frame grabber acquires video from NTSC, RS-170, PAL, CCIR, or S-Video cameras. Three-input video multiplexer allows signal selection from 2 mini- BNC or one S-Video input, while SMA connectors provide TTL trigger in and strobe out. Digitized video is transferred via DMA to the host computer's PCI bus, and XCAP-Lite software provides capabiltiy to adjust gain, hue,...

Read More »
Composite Video Frame Grabber has 2 independent BNC jacks.
Architectural & Civil Engineering Products

Composite Video Frame Grabber has 2 independent BNC jacks.

Able to capture different resolution or format video from 2 cameras (NTSC, RS-170, PAL or CCIR) simultaneously, PIXCI® SV7 can transfer digitized video to PCI Express bus at video rate. It can also transfer images at full or reduced frame rates to computer or to other targets on PCI Express bus. Video signal can be conditioned with programmable gain, hue, brightness, saturation, and...

Read More »
Frame Grabber offers image capture rates up to 280 MBps.
Computer Hardware & Peripherals

Frame Grabber offers image capture rates up to 280 MBps.

Supporting 2 high-resolution SILICON VIDEO® cameras on x1 PCI Express bus, PIXCI® SI2 comes with 64 MB of on-board memory, and allows capture of short bursts of high-resolution images from 2 cameras. It provides free-run and async capture modes, and is available with standard height or low-profile bracket. TTL trigger and strobe connectors allow async capture and strobe control, while...

Read More »
Frame Grabber transfers camera data to notebook computer.
Computer Hardware & Peripherals

Frame Grabber transfers camera data to notebook computer.

PIXCI® ECB1-34 base Camera Link frame grabber features 200 MB/sec sustained data transfer rates, with burst transfers up to 250 MB/sec. Unit plugs into ExpressCard/34 or ExpressCard/54 slot in notebook computer. Capturing from line scan or area scan cameras operating in free-run or controlled mode, unit generates programmed width exposure signal to camera for each trigger input. It includes...

Read More »
Frame Grabber offers PCI Express compatibility to cameras.
Computer Hardware & Peripherals

Frame Grabber offers PCI Express compatibility to cameras.

Available with standard or low-profile bracket, PIXCI® SI1 offers sustained data transfer rates at 190 Mb/sec and burst transfers of 250 Mb/sec. Allowing use of SILICON VIDEO® cameras on PCI Express bus, unit captures images over software-selectable pixel clock range of 25-70 MHz. It supports 64-bit memory addressing for writing long-duration image sequences into terabytes of memory....

Read More »
Frame Grabber supports Power over Camera Link.
Computer Hardware & Peripherals

Frame Grabber supports Power over Camera Link.

Compatible with all area scan and line scan base configuration Camera Link cameras, PIXCI® EB1 offers 250 Mb/sec image transfers to PCI Express bus x1 through x16 slot. It supports PoCL cameras by detecting when PoCL camera is connected and will disconnect power if it exceeds specification. Unit includes XCAP-Lite software and can be operated with camera specific controls for most Camera...

Read More »
Software

Imaging Software supports Windows® 8 and Linux 3.x kernels.

XCAP imaging programs, with dedicated support for 1,000+ camera models, also support Osprey and Owl cameras from Raptor Photonics as well as Bonito camera from Allied Vision Technologies. Depending on data rate of camera and computer’s memory or RAID capacity, XCAP-Std v3.8 streams video to memory or disk for seconds, minutes, or hours. XCAP-Viewer allows loading and viewing of images and image...

Read More »
PCIe x4 Frame Grabber for High Resolution, High Quality, Analog Video
Computer Hardware & Peripherals

PCIe x4 Frame Grabber for High Resolution, High Quality, Analog Video

The PIXCI® A310 video frame grabber acquires images from monochrome or component RGB color cameras with formats that include RS-170, CCIR, RS343, VGA, SVGA, XGA, WXGA, SXGA, SXGA+, WXGA, WSGA+, and UXGA. Many capture resolutions are available including 1920x1080p, 1920x1080i, 1280x720p, 720x480p, and 720x576p using programmable pixel clock frequencies from12 to 165 MHz. The PIXCI®...

Read More »
Progressive Scan Cameras has programmable pixel clock.
Optics & Photonics

Progressive Scan Cameras has programmable pixel clock.

SILICON VIDEO®10C6 (color) and 10M6 (monochrome) offer 10 MP progressive scan images with resolution of 3,840 x 2,764 pixels and 12 bits per pixel. Programmable area of interest, along with column and row skip modes and binning, allows resolution reduction for higher frame rates. Other features include asynchronous/triggered capture and programmable pixel clock. In addition to control for...

Read More »
Computer Hardware & Peripherals

Frame Grabber acquires composite and S-Video images.

Low profile PIXCI® SV5L frame grabber acquires video from NTSC, RS-170, PAL, CCIR, or S-Video cameras. Three-input video multiplexer allows signal selection from 2 mini- BNC or one S-Video input, while SMA connectors provide TTL trigger in and strobe out. Digitized video is transferred via DMA to the host computer's PCI bus, and XCAP-Lite software provides capabiltiy to adjust gain, hue,...

Read More »
Composite Video Frame Grabber has 2 independent BNC jacks.
Architectural & Civil Engineering Products

Composite Video Frame Grabber has 2 independent BNC jacks.

Able to capture different resolution or format video from 2 cameras (NTSC, RS-170, PAL or CCIR) simultaneously, PIXCI® SV7 can transfer digitized video to PCI Express bus at video rate. It can also transfer images at full or reduced frame rates to computer or to other targets on PCI Express bus. Video signal can be conditioned with programmable gain, hue, brightness, saturation, and...

Read More »
Frame Grabber offers image capture rates up to 280 MBps.
Computer Hardware & Peripherals

Frame Grabber offers image capture rates up to 280 MBps.

Supporting 2 high-resolution SILICON VIDEO® cameras on x1 PCI Express bus, PIXCI® SI2 comes with 64 MB of on-board memory, and allows capture of short bursts of high-resolution images from 2 cameras. It provides free-run and async capture modes, and is available with standard height or low-profile bracket. TTL trigger and strobe connectors allow async capture and strobe control, while...

Read More »
Frame Grabber transfers camera data to notebook computer.
Computer Hardware & Peripherals

Frame Grabber transfers camera data to notebook computer.

PIXCI® ECB1-34 base Camera Link frame grabber features 200 MB/sec sustained data transfer rates, with burst transfers up to 250 MB/sec. Unit plugs into ExpressCard/34 or ExpressCard/54 slot in notebook computer. Capturing from line scan or area scan cameras operating in free-run or controlled mode, unit generates programmed width exposure signal to camera for each trigger input. It includes...

Read More »
Frame Grabber offers PCI Express compatibility to cameras.
Computer Hardware & Peripherals

Frame Grabber offers PCI Express compatibility to cameras.

Available with standard or low-profile bracket, PIXCI® SI1 offers sustained data transfer rates at 190 Mb/sec and burst transfers of 250 Mb/sec. Allowing use of SILICON VIDEO® cameras on PCI Express bus, unit captures images over software-selectable pixel clock range of 25-70 MHz. It supports 64-bit memory addressing for writing long-duration image sequences into terabytes of memory....

Read More »
Frame Grabber supports Power over Camera Link.
Computer Hardware & Peripherals

Frame Grabber supports Power over Camera Link.

Compatible with all area scan and line scan base configuration Camera Link cameras, PIXCI® EB1 offers 250 Mb/sec image transfers to PCI Express bus x1 through x16 slot. It supports PoCL cameras by detecting when PoCL camera is connected and will disconnect power if it exceeds specification. Unit includes XCAP-Lite software and can be operated with camera specific controls for most Camera...

Read More »

All Topics