Motor Protection Electronics (MPE)

Apopka, FL 32703

New SC2000 Station Controllers Available with Ethernet Option
DNP3 protocol in cellular communications provides savings due to abbreviated data communications. Provides time stamping of events, report by exception and datalogging of event data during communication loss. Flow calculator enables user to set a period of time for when there will be little to no flow into the station.
Read More »
Latest Station Controllers from MPE Come with Enhanced Firmware
Available in SC100, SC1000, and SC2000 models. Uses red LED numeric displays as the integral part of easily seen and read operator interface. Numerical display time remains energized after depressing any push buttons on the operator interface.
Read More »
001-DVM-DR Phase Monitor comes with removable phoenix-style connectors.
001-DVM-DR Phase Monitor features N/O and N/C contacts and phase monitor blinks a code that specifies the status of the monitor. Unit offers adjustments for 240V from 200V to 280V and for 425V to 525V and is suitable for municipality, service related company, or electrical distributor.
Read More »
SC100 Pump Controller features a 4-digit, 7-segment digital display.
SC100 Pump Controller features push buttons helps to simulate the level, scroll through the parameters, and to change the parameter settings. Unit offers scaling range of 4-20 mA level input signals. Controller comes with pump up/pump down, lag delay and forcing the lead pump position features.
Read More »
M.P. Electronics Phase Monitor Offering
M.P. Electronics is consolidating several of its Phase Monitor offerings to give our customers a better choice for an 8-Pin Phase Monitor. We are making our 8-Pin Dual Voltage Phase Monitor our standard 8-pin offering which will allow customers to stock just one part number, regardless of the application voltage. The M.P. Electronics Dual Voltage unit has unique ranges for both the 230V and the...
Read More »
Backup Battery Charger manages power for control panel alarms.
Battery Operated and Alarm Charger (BOAC) charges backup battery found in control panels using 12 Vdc alarm strobe and horn. With power loss alarm mode switch in enable position, loss of 120 Vac power activates strobe light and horn after 5 sec delay. Alarm contact closure across pins 3 and 10 will also activate strobe light and horn. Battery charge controller IC, designed to manage charging of...
Read More »Motor Protection Electronics (MPE) Announces Additional Benefits of the PMR2 Pump Monitor Relay
The PMR2 Pump Monitor Relay provides Motor Over Temperature and Seal Leakage alarms in one unit for Xylem Flygt Submersible Pumps equipped with FLS or CLS sensors. The PMR2 can be- powered by either 120VAC, 24VAC, or 24VDC, and provides relay contacts rated for 8 Amps at 120VAC.- As many of you know; our MPEPMR2 in a direct replacement for the Flygt MiniCas. The PMR2, formally known as the...
Read More »
M.P. Electronics Announces Latest Firmware Upgrade to SC2000 and SC1000
M.P. Electronics announces its latest firmware revision for its SC1000 and SC2000 Controllers. For the SC2000 Controller, the latest firmware is Version 11, and for the SC1000 Controller, the latest firmware is Version 9. This latest version provides the following three new features: First, the end user now has the ability to remotely control the level input signal. With parameter F19 set to...
Read More »
Level Probe Converters offer panel mount option.
Available in deadfront mount versions, Model LPC420 and Model LPC420R with relay outputs enable users to see level information from both front and back. Converters monitor 10 electrodes on Level Probe, and provide analog signal that is proportional to level. Units also provide 10 Relay Outputs with contacts that close as liquid covers respective Level Probe electrodes. Relay Outputs may be used...
Read More »
Transmitter/Receiver Pair enables wireless level measurement.
Able to maintain line of site communications over distances up to 125 ft, Wireless Level Measurement Transmitter and Receiver- platform is- intended for- liquid level (0.0–34.6 ft) measurement. Transmitter sends updated level data and battery condition data once every second, while receiver reads that information and provides analog 4–20 mA output and SCADA register data. RS-232 serial...
Read More »M.P. Electronics Buys Automeg
Acquisition Completed in March Apopka, Florida -- M.P. Electronics, a nationally recognized manufacturer of industrial controls for the water and wastewater industry, has purchased the rights to the Automeg Automatic Insulation Tester product line. M.P. Electronics has manufactured the motor insulation testing product for Automeg since the product’s inception in 1991 and completed the...
Read More »
New SC2000 Station Controllers Available with Ethernet Option
DNP3 protocol in cellular communications provides savings due to abbreviated data communications. Provides time stamping of events, report by exception and datalogging of event data during communication loss. Flow calculator enables user to set a period of time for when there will be little to no flow into the station.
Read More »
Latest Station Controllers from MPE Come with Enhanced Firmware
Available in SC100, SC1000, and SC2000 models. Uses red LED numeric displays as the integral part of easily seen and read operator interface. Numerical display time remains energized after depressing any push buttons on the operator interface.
Read More »
001-DVM-DR Phase Monitor comes with removable phoenix-style connectors.
001-DVM-DR Phase Monitor features N/O and N/C contacts and phase monitor blinks a code that specifies the status of the monitor. Unit offers adjustments for 240V from 200V to 280V and for 425V to 525V and is suitable for municipality, service related company, or electrical distributor.
Read More »
SC100 Pump Controller features a 4-digit, 7-segment digital display.
SC100 Pump Controller features push buttons helps to simulate the level, scroll through the parameters, and to change the parameter settings. Unit offers scaling range of 4-20 mA level input signals. Controller comes with pump up/pump down, lag delay and forcing the lead pump position features.
Read More »
M.P. Electronics Phase Monitor Offering
M.P. Electronics is consolidating several of its Phase Monitor offerings to give our customers a better choice for an 8-Pin Phase Monitor. We are making our 8-Pin Dual Voltage Phase Monitor our standard 8-pin offering which will allow customers to stock just one part number, regardless of the application voltage. The M.P. Electronics Dual Voltage unit has unique ranges for both the 230V and the...
Read More »
Backup Battery Charger manages power for control panel alarms.
Battery Operated and Alarm Charger (BOAC) charges backup battery found in control panels using 12 Vdc alarm strobe and horn. With power loss alarm mode switch in enable position, loss of 120 Vac power activates strobe light and horn after 5 sec delay. Alarm contact closure across pins 3 and 10 will also activate strobe light and horn. Battery charge controller IC, designed to manage charging of...
Read More »Motor Protection Electronics (MPE) Announces Additional Benefits of the PMR2 Pump Monitor Relay
The PMR2 Pump Monitor Relay provides Motor Over Temperature and Seal Leakage alarms in one unit for Xylem Flygt Submersible Pumps equipped with FLS or CLS sensors. The PMR2 can be- powered by either 120VAC, 24VAC, or 24VDC, and provides relay contacts rated for 8 Amps at 120VAC.- As many of you know; our MPEPMR2 in a direct replacement for the Flygt MiniCas. The PMR2, formally known as the...
Read More »M.P. Electronics Announces Opening of New Training Facility
M.P. Electronics announces that it has just recently completed the conversion of the upstairs area of its building in Apopka, Florida into a beautiful training facility. M.P. Electronics plans to use the newly remodeled space to train its Distributors, Sales Reps, and end customers on the M.P. Electronics product line, successful sales methods, and control related topics. Motor Protection...
Read More »
M.P. Electronics Announces Latest Firmware Upgrade to SC2000 and SC1000
M.P. Electronics announces its latest firmware revision for its SC1000 and SC2000 Controllers. For the SC2000 Controller, the latest firmware is Version 11, and for the SC1000 Controller, the latest firmware is Version 9. This latest version provides the following three new features: First, the end user now has the ability to remotely control the level input signal. With parameter F19 set to...
Read More »