Share:
GSM Monitoring Receiver suits government and military systems.
Using optimized- IP core for Xilinx Virtex-6 FPGA, Cobalt® Model 52663 3U VPX Module is suited for mobile monitoring systems that must capture some or all of 1100 uplink and downlink signals in both upper and lower GSM bands. Unit accepts 4 analog inputs from external analog RF tuner, where GSM RF bands are down converted to IF frequency. IF signals are then digitized by 4 A/D...
Read More »GSM Monitoring Receiver suits government and military systems.
Using optimizedÃ- IP core for Xilinx Virtex-6 FPGA, Cobaltî Model 52663 3U VPX Module is suited for mobile monitoring systems that must capture some or all of 1100 uplink and downlink signals in both upper and lower GSM bands.àUnitàaccepts 4 analog inputs from external analog RF tuner, where GSM RF bands are down converted to IF frequency. IF signals are then digitized by...
Read More »Virtex-7 Transceiver Board suits communication, radar systems.
As 2-channel, wideband transceiver 3U VPX board based on Xilinx Virtex-7 FPGA, Onyx-® Model 52751 is suitable for connection to HF or IF ports of communication or radar systems. Along with built-in data capture and generation features, board includes two 500 MHz 12-bit ADCs followed by 2 DDCs and two 800 MHz, 16-bit DACs with DUC. Programmable decimation and interpolation ranges for each DDC and...
Read More »Virtex-7 Transceiver Board suits communication, radar systems.
As 2-channel, wideband transceiver 3U VPX board based on Xilinx Virtex-7 FPGA, OnyxÃ-® Model 52751 is suitable for connection to HF or IF ports of communication or radar systems. Along with built-in data capture and generation features, board includes two 500 MHz 12-bit ADCs followed by 2 DDCs and two 800 MHz, 16-bit DACs with DUC. Programmable decimation and interpolation ranges for each DDC...
Read More »XMC Software Radio Module suits wideband signal applications.
Based on Xilinx Virtex-7 FPGA, Onyx-® Model 71741 can digitize signal bandwidths up to 1,500 MHz. Front end accepts analog RF or IF inputs on pair of front panel SSMC connectors with transformer coupling into ADC12D1800 12-bit A/D. Converter operates in single-channel interleaved mode with 3.6 GHz sampling rate and 1.75 GHz input bandwidth or in dual-channel mode with 1.8 GHz sampling rate and...
Read More »XMC Software Radio Module suits wideband signal applications.
Based on Xilinx Virtex-7 FPGA, OnyxÃ-® Model 71741 can digitize signal bandwidths up to 1,500 MHz. Front end accepts analog RF or IF inputs on pair of front panel SSMC connectors with transformer coupling into ADC12D1800 12-bit A/D. Converter operates in single-channel interleaved mode with 3.6 GHz sampling rate and 1.75 GHz input bandwidth or in dual-channel mode with 1.8 GHz sampling rate...
Read More »Rackmount Recorders operate in extreme environments.
Housed in 4U military-specified chassis constructed using heavy-duty wrought aluminum extrusions, Talon-® RTX Series provides aggregate recording rates up to 5 GBps. QuickPac™ canister allows storage drives to be removed and replaced in field. Each canister holds 8 SSDs, providing 7.68 TB of storage. Up to 4 QuickPac canisters can be installed in chassis for over 30 TB of total...
Read More »Rackmount Recorders operate in extreme environments.
Housed in 4U military-specified chassis constructed using heavy-duty wrought aluminum extrusions, TalonÃ-® RTX Series provides aggregate recordingÃÂ rates up to 5 GBps. QuickPac™ canister allowsÃÂ storage drives to be removed and replaced in field. EachÃÂ canister holds 8 SSDs, providing 7.68 TB of storage. Up to 4ÃÂ QuickPac canisters can be installed in chassis for...
Read More »FMC/VPX Carrier features optical backplane interface.
As 3U VPX FMC carrier with a Virtex-7 FPGA, Flexor™ Model 5973 features VITA 57.1 FMC (FPGA Mezzanine Card) site, 4 GB DDR3 SDRAM, PCIe (Gen 1, 2, and 3) interface up to x8, optional user-configurable gigabit serial I/O, and optional LVDS connections to FPGA for custom I/O. Flexor Model 3312 FMC offers four 250 MHz 16-bit A/Ds and two 800 MHz 16-bit D/As. FMC connector matches Virtex-7 FPGA...
Read More »FMC/VPX Carrier features optical backplane interface.
As 3U VPX FMC carrier with a Virtex-7 FPGA, Flexor™ Model 5973 features VITA 57.1 FMC (FPGA Mezzanine Card) site, 4 GB DDR3 SDRAM, PCIe (Gen 1, 2, and 3) interface up to x8, optional user-configurable gigabit serial I/O, and optional LVDS connections to FPGA for custom I/O. Flexor Model 3312 FMC offers four 250 MHz 16-bit A/Ds and two 800 MHz 16-bit D/As. FMC connector matches Virtex-7 FPGA...
Read More »